Date: Thu, 7 Dec 2006 08:32:52 +0200 From: a@zeos.net To: freebsd-questions@freebsd.org Subject: How to use ulpt driver? Message-ID: <20061207063252.GA769@host.my.domain>
next in thread | raw e-mail | index | archive | help
I get USB printer Canon PIXMA iP 2000 and attached it to my computer.
The kernel was compiled with:
# USB support
device uhci # UHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device umass # Disks/Mass storage - Requires scbus and da
and sees the printer:
------------------------------------------------------------------------
$ dmesg
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #14: Thu Dec 7 07:15:51 EET 2006
root@host.my.domain:/usr/obj/usr/src/sys/MYKERNEL
ACPI APIC Table: <MSISYS AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 1.50GHz (1511.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf12 Stepping = 2
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 805240832 (767 MB)
avail memory = 782880768 (746 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
acpi0: <MSISYS MSI ACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x40f7 on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xd8000000-0xdbffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xde000000-0xde0000ff irq 17 at device 1.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:02:44:92:18:75
pci2: <mass storage, SCSI> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xd000-0xd01f irq 19 at device 31.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xd800-0xd81f irq 23 at device 31.4 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcm0: <Intel ICH2 (82801BA)> port 0xdc00-0xdcff,0xe000-0xe03f irq 17 at device 31.5 on pci0
pcm0: <Analog Devices AD1885 AC97 Codec>
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen0: Canon iP2000, rev 1.10/1.05, addr 2
Timecounter "TSC" frequency 1511681224 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38204MB <SAMSUNG SV4002H QP100-12> at ata0-master UDMA100
acd0: CDROM <SAMSUNG CD-ROM SC-152L/C100> at ata1-master PIO4
Trying to mount root from ufs:/dev/ad0s1a
rl0: link state changed to UP
------------------------------------------------------------------------
Now I loaded ulpt dinamically:
------------------------------------------------------------------------
$ kldstat
Id Refs Address Size Name
1 14 0xc0400000 33dc1c kernel
2 1 0xc073e000 58554 acpi.ko
.................
12 1 0xc45f1000 3000 ulpt.ko
------------------------------------------------------------------------
But no ulpt in /dev appeared:
------------------------------------------------------------------------
$ ls /dev
acd0 bpsm0 kbd0 random ttyv9
acpi console klog sndstat ttyva
ad0 consolectl kmem stderr ttyvb
ad0s1 ctty log stdin ttyvc
ad0s1a devctl mdctl stdout ttyvd
ad0s1b devstat mem sysmouse ttyve
ad0s1c dsp0.0 mixer0 ttyp0 ttyvf
ad0s1d dsp0.1 net ttyv0 ugen0
ad0s1e dspW0.0 net1 ttyv1 ugen0.1
ad0s1f dspW0.1 net2 ttyv2 ugen0.2
agpgart dspr0.1 net3 ttyv3 urandom
apm fd network ttyv4 usb
ata fd0 null ttyv5 usb0
atkbd0 fido pci ttyv6 usb1
audio0.0 geom.ctl psm0 ttyv7 xpt0
audio0.1 io ptyp0 ttyv8 zero
------------------------------------------------------------------------
What is wrong and how will I print?
Elisej Babenko
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061207063252.GA769>