Date: Sun, 06 Jun 2004 16:30:12 -0500 From: "Hector Rivera" <ra2833@hotmail.com> To: freebsd-questions@freebsd.org Subject: Fatal trap 18 Message-ID: <BAY2-F104qKgWRjfXr600000bf1@hotmail.com>
next in thread | raw e-mail | index | archive | help
Fatal trap 18 Hello, i have an IBM Thinkpad A30 which comes with embedded wireless. the mini-pci card is Prism card. the following is information from the post or loader when i boot FreeBSD 5.2.1 wi0: <Intersil Prism2.5> mem 0xf0000000 – 0xf0000fff irq11 at device 2.0 on pci2 wi0: 802.11 address: 00:20:c0:8a:93:ce wi0: using RF: PRISM2.5 MAC: ISL3874A(Mini-PCI) wi0: Intersil Firmware: Primary (1.1.0), Station(1.4.2) wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps when i type in this ifconfig wi0 i get the following info wi0: flags = 8843 <UP, BROADCAST, RUNNING, SIMPLEX, MULTICAST> mtu 1500 inet6 fe80::220:e0ff:fe8a:93cd% wi0 prefixlen 64 scopeid 0x1 inet 0.0.0.0 netmask 0xff0880 broadcast 255.255.255.255 ether 00:20:e0:9a:93:ce media: IEEE 802.11 Wireless Ethernet Autoselect (DS/2Mbps) status: no carrier ssid “” stationname “FreeBSD Wavelan /IEEE node” Channel -1 authmode OPEN powersavemode OFF powersaveleep 100 wepmode OFF weptxkey1 i then type in the following command ifconfig wi0 inet 192.168.100.100 netmask 255.255.255.0 ssid my_ssid immediately after this command is done, i get the following error Fatal trap 18: integer divide fault while in kernel mode cupid = 0; apicid = 00 instruction pointer = 0x8: 0xc0583642 stack pointer = 0x10: 0xcdcafcc8 fram pointer = 0x10: 0xcdcafcc8 code segment = base 0x0, limit oxfffff, type ox1b = DPL 0, pres 1, det32 1, gram1 processor eflags = interrupt enabled, IOPL = 0 current process = 22 (irq11: cbb0 cbb1+++) trap number = 18 panic : integer divide fault cupid =0; can someone help me out here? this happens no matter how many commands are tide on to ifconfg, what i mean is that i get the same error when i type in the following commands: ifconfig wi0 inet 192.168.100.100 OR ifconfig wi0 netmask 255.255.255.0 OR ifconfig wi0 ssid my_ssid OR any other combination. thank you Hector _________________________________________________________________ MSN Toolbar provides one-click access to Hotmail from any Web page – FREE download! http://toolbar.msn.click-url.com/go/onm00200413ave/direct/01/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY2-F104qKgWRjfXr600000bf1>