Date: Sat, 30 Mar 2002 00:02:42 +0200 From: Tomi Vainio - Sun Finland - <Tomi.Vainio@Sun.COM> To: freebsd-smp@freebsd.org Cc: freebsd-current@freebsd.org Subject: Current SMP status with Intel PR440FX? Message-ID: <15524.58498.368763.510910@gargle.gargle.HOWL>
next in thread | raw e-mail | index | archive | help
Hi,
We've tried to get my brothers dual cpu intel pr440fx up with current
cvsupped two days ago. This machine has worked just fine couple years
with stable but we had some problems with latest X so we also updated
system to current. We've been booting this system whole day just
trying different kernels but didn't have any luck. Mostly system just
freezes when it tries to lauch cpu1 so bad that we can't enter
debugger. Last thing to do was GENERIC kernel with SMP+APIC_IO and
with this we could access debugger the first time ever. Second boot
using this same kernel succeeded but now we don't have enough courage
to boot it again. CPU1 apic init message looks messy. I haven't seen
any problems reported smp or current mailing lists.
Tomppa
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #4: Fri Mar 29 22:55:16 EET 2002
ramppa@atom.kpnqwest.fi:/u/FreeBSD/obj/u/FreeBSD/src/sys/ATOM
Preloaded elf kernel "/boot/kernel/kernel" at 0xc054a000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc054a0a8.
Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc054a0f8.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc054a1a8.
Calibrating clock(s) ... TSC clock: 198660631 Hz, i8254 clock: 1193158 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium Pro (198.67-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping = 9
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory = 268435456 (262144K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00574000 - 0x0fff7fff, 262684672 bytes (64132 pages)
avail memory = 255340544 (249356K bytes)
Programming 24 pins in IOAPIC #0
SMP: CPU0 apic_initialize():
lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfec08000
cpu1 (AP): apic id: 12, version: 0x00040011, at 0xfec08000
io0 (APIC): apic id: 13, version: 0x00170011, at 0xfec00000
bios32: Found BIOS32 Service Directory header at 0xc00fd9e0
bios32: Entry = 0xfd9f0 (c00fd9f0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xda11
pnpbios: Found PnP BIOS data at 0xc00fa000
pnpbios: Entry = f0000:a100 Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 02 d7 74 00 c0 01 00 00 00 22 00
00 01 40 00 05 02 ec 74 00 c0 f3 74 00 c0 fe 74
00 c0 00 01 01 01 02 01 03 01 05 01 07 01 08 01
09 01 0b 01 0c 01 10 01 11 01 12 01 13 01 14 01
VESA: 24 mode(s) found
VESA: v2.0, 4096k memory, flags:0x1, mode table:0xc05472a2 (1000022)
VESA: Matrox Graphics Inc.
VESA: Matrox MILLENNIUM 00
module_register_init: MOD_LOAD (splash_bmp, 0xc053f8c8, 0) error 2
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff
pci_open(1): mode 1 addr port (0x0cf8) is 0x80005848
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12378086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: physical bus=0
found-> vendor=0x8086, dev=0x1237, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
IOAPIC #0 intpin 18 -> irq 2
Freeing (NOT implemented) redirected PCI irq 11.
map[10]: type 3, range 32, base ffbe8000, size 12, enabled
map[14]: type 4, range 32, base 0000ff40, size 5, enabled
map[18]: type 1, range 32, base ff800000, size 20, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x01
bus=0, slot=6, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=2
found-> vendor=0x8086, dev=0x7000, revid=0x01
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x8086, dev=0x7010, revid=0x00
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
IOAPIC #0 intpin 17 -> irq 10
map[10]: type 4, range 32, base 0000fc00, size 8, enabled
map[14]: type 1, range 32, base ffbeb000, size 12, enabled
found-> vendor=0x9004, dev=0x8078, revid=0x00
bus=0, slot=9, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=10
IOAPIC #0 intpin 16 -> irq 11
map[10]: type 1, range 32, base ffbec000, size 14, enabled
map[14]: type 3, range 32, base ff000000, size 23, enabled
found-> vendor=0x102b, dev=0x0519, revid=0x01
bus=0, slot=11, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
map[10]: type 3, range 32, base ffbe9000, size 12, enabled
found-> vendor=0x109e, dev=0x0351, revid=0x12
bus=0, slot=15, func=0
class=04-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=10
pci0: <PCI bus> on pcib0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xff40-0xff5f mem 0xff800000-0xff8fffff,0xffbe8000-0xffbe8fff irq 2 at device 6.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:a0:c9:06:c8:b4
fxp0: PCI IDs: 8086 1229 0000 0000 0001
fxp0: Dynamic Standby mode is disabled
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 14 eb
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=00 stat1=00
ata0: devices=04
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
ata1: at 0x170 irq 15 on atapci0
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xfc00-0xfcff mem 0xffbeb000-0xffbebfff irq 10 at device 9.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: High byte termination Enabled
ahc0: Downloading Sequencer Program... 439 instructions downloaded
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs
pci0: <display, VGA> at device 11.0 (no driver attached)
pci0: <multimedia, video> at device 15.0 (no driver attached)
ata: ata0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
pnpbios: 16 devices, largest 126 bytes
PNP0201: adding io range 0-0xf, size=0x10, align=0x1
PNP0201: adding io range 0x80-0x90, size=0x11, align=0x1
PNP0201: adding io range 0x94-0x9f, size=0xc, align=0x1
PNP0201: adding io range 0xc0-0xde, size=0x1f, align=0x1
PNP0201: adding io range 0x40b-0x40b, size=0x1, align=0x1
PNP0201: adding io range 0x410-0x43f, size=0x30, align=0x1
PNP0201: adding io range 0x481-0x483, size=0x3, align=0x1
PNP0201: adding io range 0x487-0x487, size=0x1, align=0x1
PNP0201: adding io range 0x489-0x48c, size=0x4, align=0x1
PNP0201: adding io range 0x4d6-0x4d6, size=0x1, align=0x1
PNP0201: adding dma mask 0x10
pnpbios: handle 1 device ID PNP0201 (0102d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 4 device ID PNP0800 (0008d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 5 device ID PNP0c04 (040cd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 7 device ID PNP0f13 (130fd041)
PNP0c01: adding fixed memory32 range 0xe8000-0xfffff, size=0x18000
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0x100000-0xfffffff, size=0xff00000
PNP0c01: adding fixed memory32 range 0xffe80000-0xffffffff, size=0x180000
PNP0c01: adding fixed memory32 range 0xfec00000-0xfec08fff, size=0x9000
pnpbios: handle 8 device ID PNP0c01 (010cd041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 10 device ID PNP0700 (0007d041)
pnpbios: handle 11 device ID PNP0400 (0004d041)
pnpbios: handle 12 device ID PNP0501 (0105d041)
pnpbios: handle 13 device ID PNP0501 (0105d041)
PNP0c02: adding io range 0x78-0x7f, size=0x8, align=0x1
PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0x1
pnpbios: handle 14 device ID PNP0c02 (020cd041)
pnpbios: handle 15 device ID PNP0c02 (020cd041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xea000-0xebfff,0xe9000-0xe9fff,0xc8000-0xcc7ff,0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0045
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0-51, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:08, syncbits:08
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 drq 3 on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 failed to probe at port 0x3f8-0x3ff irq 4 flags 0x20 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
isa_probe_children: probing PnP devices
adv0: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0201> failed to probe at port 0x4d6,0x489-0x48c,0x487,0x481-0x483,0x410-0x43f,0x40b,0xc0-0xde,0x94-0x9f,0x80-0x90,0-0xf drq 4 on isa0
adv0: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe.
adv0: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Failing probe.
adv0: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv0: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
adv0: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330. Failing probe.
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
ppc1: parallel port not found.
unknown: <Standard parallel printer port> failed to probe on isa0
unknown: <16550A-compatible COM port> failed to probe on isa0
unknown: <16550A-compatible COM port> failed to probe on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x78-0x7f on isa0
SMP: enabled INTs: 1, 2, 6, 10, 12, 14, 15, apic_imen: 0xffff2bb9
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
procfs registered
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
bpf: lo0 attached
bpf: ppp0 attached
ata0-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata0-master: success setting PIO4 on generic chip
acd0: <CD-ROM CDU611/1.0p> CDROM drive at ata0 as master
acd0: read 1378KB/s (33004KB/s), 256KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream
acd0: Writes:
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(probe0:ahc0:0:0:0): Retrying Command
(probe1:ahc0:0:1:0): Retrying Command
(ahc0:A:5:0): Sending SDTR period c, offset f
(ahc0:A:5:0): Received SDTR period 32, offset f
Filtered to period 32, offset f
ahc0: target 5 synchronous at 5.0MHz, offset = 0xf
(ahc0:A:5:0): Sending SDTR period 32, offset f
(ahc0:A:5:0): Received SDTR period 32, offset f
Filtered to period 32, offset f
(ahc0:A:0:0): Sending WDTR 1
(ahc0:A:0:0): Received WDTR 1 filtered to 1
ahc0: target 0 using 16bit transfers
(ahc0:A:0:0): Sending SDTR period c, offset 8
(ahc0:A:0:0): Received SDTR period c, offset 8
Filtered to period c, offset 8
ahc0: target 0 synchronous at 20.0MHz, offset = 0x8
(ahc0:A:1:0): Sending WDTR 1
(ahc0:A:1:0): Received WDTR 1 filtered to 1
ahc0: target 1 using 16bit transfers
(ahc0:A:1:0): Sending SDTR period c, offset 8
(ahc0:A:1:0): Received SDTR period c, offset 8
Filtered to period c, offset 8
ahc0: target 1 synchronous at 20.0MHz, offset = 0x8
sa0 at ahc0 bus 0 target 5 lun 0
sa0: <DEC DLT2000 15/30 GB 840B> Removable Sequential Access SCSI-2 device
sa0: Serial Number JF73616926
sa0: 5.000MB/s transfers (5.000MHz, offset 15)
Creating DISK da0
Creating DISK da1
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <HP 18.2GB C 68-D84D D84D> Fixed Direct Access SCSI-2 device
pass0: Serial Number TEFD5787
pass0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
pass1 at ahc0 bus 0 target 1 lun 0
pass1: <HP 18.2GB C 68-D84D D84D> Fixed Direct Access SCSI-2 device
pass1: Serial Number TEFE0227
pass1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
pass2 at ahc0 bus 0 target 5 lun 0
pass2: <DEC DLT2000 15/30 GB 840B> Removable Sequential Access SCSI-2 device
pass2: Serial Number JF73616926
pass2: 5.000MB/s transfers (5.000MHz, offset 15)
da0 at ahc0 bus 0 target 0 lun 0
da0: <HP 18.2GB C 68-D84D D84D> Fixed Direct Access SCSI-2 device
da0: Serial Number TEFD5787
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <HP 18.2GB C 68-D84D D84D> Fixed Direct Access SCSI-2 device
da1: Serial Number TEFE0227
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C)
SMP: CPU1 apic_initountinialg roize(ot ):
from lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
ufs:/dev/da0s3a
SMP: AP CPU #1 Launched!
da0s1: type 0xb, start 63, end = 2056319, size 2056257 : OK
da0s2: type 0xa5, start 2056320, end = 3068414, size 1012095 : OK
da0s3: type 0xa5, start 3068415, end = 5108669, size 2040255 : OK
da0s4: type 0xa5, start 5108670, end = 35551844, size 30443175 : OK
WARNING: / was not properly dismounted
start_init: trying /sbin/init
da1s1: type 0xa5, start 63, end = 35551844, size 35551782 : OK
da1s1: type 0xa5, start 63, end = 35551844, size 35551782 : OK
da1s1: type 0xa5, start 63, end = 35551844, size 35551782 : OK
Linux ELF exec handler installed
linprocfs registered
link_elf: symbol lminor undefined
===============================================================================
MPTable, version 2.0.15
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f7ef0
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x12
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x000f7f00
signature: 'PCMP'
base table length: 236
version: 1.4
checksum: 0xff
OEM ID: 'INTEL '
Product ID: 'PR440FX '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 21
local APIC address: 0xfec08000
extended table length: 120
extended table checksum: 15
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
0 0x11 BSP, usable 6 1 9 0xfbff
12 0x11 AP, usable 6 1 9 0xfbff
--
Bus: Bus ID Type
0 PCI
18 ISA
--
I/O APICs: APIC ID Version State Address
13 0x11 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 18 0 13 0
INT active-hi edge 18 1 13 1
INT active-hi edge 18 3 13 3
INT active-hi edge 18 4 13 4
INT active-hi edge 18 5 13 5
INT active-hi edge 18 6 13 6
INT active-hi edge 18 7 13 7
INT active-hi edge 18 8 13 8
INT active-hi edge 18 9 13 9
INT active-hi edge 18 12 13 12
INT active-hi edge 18 14 13 14
INT active-hi edge 18 15 13 15
INT active-lo level 0 15:A 13 17
INT active-lo level 0 11:A 13 16
INT active-lo level 0 9:A 13 17
INT active-lo level 0 6:A 13 18
-------------------------------------------------------------------------------
MP Config Extended Table Entries:
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xd4000
address range: 0x4000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xd8000
address range: 0x4000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xdc000
address range: 0x4000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xa0000
address range: 0x20000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0x10000000
address range: 0xf0000000
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x10000
===============================================================================
--
SUN Microsystems Oy PL 112, Lars Sonckin kaari 12, 02601 ESPOO, Finland
Tomi Vainio (System Support Engineer) +358 9 52556300 hotline
email: Tomi.Vainio@Sun.COM +358 9 52556252 fax
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15524.58498.368763.510910>