Date: Wed, 8 Oct 2003 13:32:28 -0500 (CDT) From: Stephen Cravey <clists@www.gotbrains.org> To: questions@freebsd.org Subject: LITE-ON cd-rw and 5.1-p10 Message-ID: <20031008131802.R17436@www.gotbrains.org>
next in thread | raw e-mail | index | archive | help
I've just cobbled together a new machine and purchased a LITE-ON
LTR-52327S CD-RW for it. FreeBSD, however, seems unable to detect the
drive. On boot, there is no acd device shown at all, however I do get an
ACPI error. (dmesg will follow)
I can boot from the 5.1-R install CD with no problem, however when I
select cd/dvd as the install media, it claims that there is no dvd/cd
drive found!?!?!. I also get a 'drive full error usually when i boot from
CD and install from FTP as soon as the data starts writing to the hard
drive. The fdisk and newfs stages seem to complete normally prior to
this. I ended up installing from floppy.
The seagate is the master and the lite-on is the slave on the primary bus.
I'm using a new ata 66/100/133 cable. I plan to get a second ata cable
this afternoon and try to put them on seperate busses, however i'm not
sure that's the problem. Any suggestions on what I should look for or
what might be wrong? Anything goes.
Thank you.
-Stephen
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE-p10 #0: Wed Oct 8 02:08:53 CDT 2003
****@************:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06d4000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06d41f4.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 731470027 Hz
CPU: Intel Pentium III (731.47-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 134152192 (127 MB)
avail memory = 122933248 (117 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIA694 AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fdcd0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.FDC0._CRS]
(Node 0xc18bdca0), AE_AML_UNINITIALIZED_LOCAL
ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.FDC0._CRS]
(Node 0xc18bdca0), AE_AML_UNINITIALIZED_LOCAL
can't fetch resources for \\_SB_.PCI0.FDC0 - AE_AML_UNINITIALIZED_LOCAL
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port
0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem
0xd8000000-0xdbffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596B UDMA66 controller> port 0xe000-0xe00f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 5 at device 7.2
on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, HOST-PCI> at device 7.3 (no driver attached)
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xe800-0xe87f mem
0xdf000000-0xdf00007f irq 11 at device 11.0 on pci0
xl0: Ethernet address: 00:50:04:c3:a1:ec
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: cannot reserve I/O port range (1 ports)
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: cannot reserve I/O port range (1 ports)
orm0: <Option ROMs> at iomem 0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: cannot reserve I/O port range (6 ports)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 76319MB <ST380011A> [155061/16/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031008131802.R17436>