From owner-freebsd-questions Wed Aug 9 9: 1:48 2000 Delivered-To: freebsd-questions@freebsd.org Received: from trill.hh.se (trill.hh.se [194.47.5.10]) by hub.freebsd.org (Postfix) with ESMTP id 8D0CD37BD89; Wed, 9 Aug 2000 09:01:28 -0700 (PDT) (envelope-from u98jobj@stud.hh.se) Received: from gs177.gsten.hh.se (chip@gs177.gsten.hh.se [194.47.16.177]) by trill.hh.se (8.9.3/8.9.3) with ESMTP id SAA23106; Wed, 9 Aug 2000 18:01:22 +0200 (MET DST) Message-ID: X-Mailer: XFMail 1.4.0 on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <4.3.2.7.0.20000809111509.05e3b600@marble.sentex.ca> Date: Wed, 09 Aug 2000 18:01:22 +0200 (CEST) From: Joel Bjork To: Mike Tancsa Subject: RE: forcing which SCSI device to boot from Cc: hardware@FreeBSD.ORG, questions@FreeBSD.ORG Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On 09-Aug-00 Mike Tancsa wrote: > > I have an Adaptec 2940 and a 3ware IDE raid card. I have been booting from > the Adaptec, but when I put the 3ware card in, the drive insists on booting > from the 3ware. Apart from making a boot floppy disk, is there any way to > force the drive to boot from the Adaptec ? > > ---Mike Sounds like a BIOS issue, check the bootorder in the Bios, defaults are ususally: floppy, IDE, SCSI ---------------------------------- E-Mail: Joel Bjork Date: 09-Aug-00 Time: 18:01:22 ---------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message