Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 17 Aug 2001 11:19:46 -0700 (PDT)
From:      Matthew Jacob <mjacob@feral.com>
To:        <freebsd-alpha@freebsd.org>
Subject:   so, what was the problem with cdboot for 4.4-PRE anyway? Worked for me..
Message-ID:  <20010817111752.L70594-100000@wonky.feral.com>

next in thread | raw e-mail | index | archive | help

P00>>sho dev
polling ncr0 (NCR 53C810) slot 1, bus 0 PCI, hose 1 p  SCSI Bus ID 7
dka500.5.0.1.1     DKA500                   RRD46  1337
mka600.6.0.1.1     MKA600                   TLZ09  0173
polling isp0 (QLogic ISP1020) slot 5, bus 0 PCI, hose 1   SCSI Bus ID 7
dkb0.0.0.5.1       DKB0                     IBM DORS32160SUN2.1G  WA7A
dkb100.1.0.5.1     DKB100                   SEAGATE ST34371W SUN4.2G  7462
dkb200.2.0.5.1     DKB200                   QUANTUM VK4550J  SUN4.2G  8600
dkb300.3.0.5.1     DKB300                   CONNER CFP2107E  2.14GB  1527
dkb800.8.0.5.1     DKB800                   SEAGATE ST318203LC  0002
dkb900.9.0.5.1     DKB900                   QUANTUM VK4550J  SUN4.2G  8600
dkb1000.10.0.5.1   DKB1000                  CONNER CFP2107E  2.14GB  1527
dkb1100.11.0.5.1   DKB1100                  QUANTUM VK4550J  SUN4.2G  8600
jkb1400.14.0.5.1   JKB1400                  SYMBIOS   2
jkb1500.15.0.5.1   JKB1500                  SYMBIOS   2
polling floppy0 (FLOPPY) PCEB - XBUS hose 0
dva0.0.0.1000.0    DVA0                      RX23
polling tulip0 (DECchip 21140-AA) slot 2, bus 0 PCI, hose 1
ewa0.0.0.2.1       00-00-F8-01-8B-D7	FastFD (Full Duplex)
P00>>b dka500
Initializing...
~
 SROM V3.0 on cpu0
 SROM V3.0 on cpu2
 SROM V3.0 on cpu1
 SROM V3.0 on cpu3
XSROM V5.4 on cpu2
XSROM V5.4 on cpu3
XSROM V5.4 on cpu0
XSROM V5.4 on cpu1
BCache testing complete on cpu2
BCache testing complete on cpu0
BCache testing complete on cpu3
BCache testing complete on cpu1
mem_pair0 - 1024 MB
mem_pair1 - 512 MB
20.. wait 30 seconds for T24 to complete
24..24..24..24..
Memory testing complete on cpu1
Memory testing complete on cpu3
Memory testing complete on cpu0
Memory testing complete on cpu2
starting console on CPU 0
sizing memory
  0   1024 MB EDO
  1    512 MB EDO
starting console on CPU 1
starting console on CPU 2
starting console on CPU 3
skipping power-up I/O tests - disabled by user
probing IOD1 hose 1
  bus 0 slot 1 - NCR 53C810
  bus 0 slot 2 - DECchip 21140-AA
  bus 0 slot 5 - QLogic ISP1020
probing IOD0 hose 0
  bus 0 slot 1 - PCEB
    probing EISA Bridge, bus 1
  bus 0 slot 5 - SCSI Controller
configuring I/O adapters...
  ncr0, hose 1, bus 0, slot 1
  tulip0, hose 1, bus 0, slot 2
  isp0, hose 1, bus 0, slot 5
  floppy0, hose 0, bus 1, slot 0
System temperature is 27 degrees C
AlphaServer 4100 Console V5.4-2, 8-APR-1999 14:36:23

CPU 0 booting

(boot dka500.5.0.1.1 -flags a)
block 0 of dka500.5.0.1.1 is a valid boot block
reading 369 blocks from dka500.5.0.1.1
bootstrap code read in
Building FRU table
base = 200000, image_start = 0, image_bytes = 2e200
initializing HWRPB at 2000
initializing page table at 1f2000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Console: SRM firmware console

VMS PAL rev: 0x4000100010115
OSF PAL rev: 0x4000100020117
Switch to OSF PAL code succeeded.

FreeBSD/alpha SRM CD9660 boot, Revision 1.0
(root@nellie.feral.com, Fri Aug 17 04:23:47 GMT 2001)
Memory: 1572864 k
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [kernel] in 9 seconds... Booting [kernel] in 8 seconds... Booting [kernel]...
kernel data=0x5ea160+0x261b0
Entering kernel at 0xfffffc000032b240...
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.3-20010816-STABLE #1: Fri Aug 17 07:08:52 GMT 2001
    root@nellie.feral.com:/usr/src/sys/compile/BOOTMFS
AlphaServer 4100
AlphaServer 4100 5/533 4MB, 531MHz
8192 byte page size, 4 processors.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x4000100020117
real memory  = 1608482816 (1570784K bytes)
avail memory = 1559158784 (1522616K bytes)
Preloaded elf kernel "kernel" at 0xfffffc0000914000.
md1: Malloc disk
mcpcia0: <MCPCIA PCI Adapter> at mcbus0 gid 7 mid 5
mcpcia0: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2
pci0: <PCI bus> on pcib0
sym0: <810> port 0x1fffd00-0x1fffdff mem 0x7feee00-0x7feeeff irq 4 at device 1.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: interrupting at IRQ 0x10 intA (vec 0xb40)
de0: <Digital 21140 Fast Ethernet> port 0x1fffe00-0x1fffe7f mem 0x7feef00-0x7feef7f irq 8 at device 2.0 on pci0
de0: interrupting at IRQ 0x0 intA (vec 0xb80)
de0: DEC DE500-XA 21140 [10-100Mb/s] pass 1.2
de0: address 00:00:f8:01:8b:d7
de0: enabling Full Duplex 100baseTX port
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x1ffff00-0x1ffffff mem 0x7fef000-0x7feffff irq 20 at device 5.0 on pci0
isp0: interrupting at IRQ 0xc intA (vec 0xc40)
mcpcia1: <MCPCIA PCI Adapter> at mcbus0 gid 7 mid 4
mcpcia1: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2
Attaching Real Console
pci16: <PCI bus> on pcib1
isab0: <Intel 82375EB PCI-EISA bridge> at device 1.0 on pci16
isa0: <ISA bus> on isab0
isp1: <Qlogic ISP 2200 PCI FC-AL Adapter> port 0x41ffff00-0x41ffffff mem 0x47fdf000-0x47fdffff irq 20 at device 5.0 on pci16
isp1: interrupting at IRQ 0xc intA (vec 0xa40)
isp1: WARNING- cannot determine Expanded LUN capability- limiting to one LUN
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1: reserved for low-level i/o
Timecounter "alpha"  frequency 532792192 Hz
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/md0c
da8 at isp1 bus 0 target 130 lun 0
da8: <SEAGATE ST39102F CLAR09 SG0C> Fixed Direct Access SCSI-2 device
da8: 100.000MB/s transfers, Tagged Queueing Enabled
da8: 8625MB (17664229 512 byte sectors: 255H 63S/T 1099C)
da2 at isp0 bus 0 target 2 lun 0
da2: <QUANTUM VK4550J  SUN4.2G 8600> Fixed Direct Access SCSI-2 device
da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da2: 4094MB (8385121 512 byte sectors: 255H 63S/T 521C)
da9 at isp1 bus 0 target 131 lun 0
da9: <SEAGATE ST39102F CLAR09 SG0C> Fixed Direct Access SCSI-2 device
da9: 100.000MB/s transfers, Tagged Queueing Enabled
da9: 8625MB (17664229 512 byte sectors: 255H 63S/T 1099C)
da10 at isp1 bus 0 target 132 lun 0
da10: <SEAGATE ST39102F CLAR09 SG0C> Fixed Direct Access SCSI-2 device
da10: 100.000MB/s transfers, Tagged Queueing Enabled
da10: 8625MB (17664229 512 byte sectors: 255H 63S/T 1099C)
da11 at isp1 bus 0 target 133 lun 0
da11: <SEAGATE ST39102F CLAR09 SG0C> Fixed Direct Access SCSI-2 device
da11: 100.000MB/s transfers, Tagged Queueing Enabled
da11: 8625MB (17664229 512 byte sectors: 255H 63S/T 1099C)
da3 at isp0 bus 0 target 3 lun 0
da3: <CONNER CFP2107E  2.14GB 1527> Fixed Direct Access SCSI-2 device
da3: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
da3: 2048MB (4194304 512 byte sectors: 255H 63S/T 261C)
da5 at isp0 bus 0 target 9 lun 0
da5: <QUANTUM VK4550J  SUN4.2G 8600> Fixed Direct Access SCSI-2 device
da5: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da5: 4094MB (8385121 512 byte sectors: 255H 63S/T 521C)
da1 at isp0 bus 0 target 1 lun 0
da1: <SEAGATE ST34371W SUN4.2G 7462> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 4094MB (8385121 512 byte sectors: 255H 63S/T 521C)
da4 at isp0 bus 0 target 8 lun 0
da4: <SEAGATE ST318203LC 0002> Fixed Direct Access SCSI-2 device
da4: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da4: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C)
da6 at isp0 bus 0 target 10 lun 0
da6: <CONNER CFP2107E  2.14GB 1527> Fixed Direct Access SCSI-2 device
da6: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
da6: 2048MB (4194304 512 byte sectors: 255H 63S/T 261C)
da7 at isp0 bus 0 target 11 lun 0
da7: <QUANTUM VK4550J  SUN4.2G 8600> Fixed Direct Access SCSI-2 device
da7: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da7: 4094MB (8385121 512 byte sectors: 255H 63S/T 521C)
da0 at isp0 bus 0 target 0 lun 0
da0: <IBM DORS32160SUN2.1G WA7A> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
/stand/sysinstall running as init on serial console

These are the predefined terminal types available to
sysinstall when running stand-alone.  Please choose the
closest match for your particular terminal.

1 ...................... Standard ANSI terminal.
2 ...................... VT100 or compatible terminal.
3 ...................... FreeBSD system console (color).
4 ...................... FreeBSD system console (monochrome).

5 ...................... xterm terminal emulator.

Your choice: (1-5) cd0 at sym0 bus 0 target 5 lun 0
cd0: <DEC RRD46   (C) DEC 1337> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: cd present [408840 x 512 byte records]


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010817111752.L70594-100000>