Date: Tue, 15 Jun 1999 01:43:37 +0800 (SGT) From: Alvin Jiang <alvin@ajiang.com> To: alvin@singnet.com.sg Cc: freebsd-stable@FreeBSD.ORG Subject: Re: Yamaha CD-R[W] drives (Re: Is the CD driver) Message-ID: <199906141743.BAA23409@utopia.ajiang.com>
next in thread | raw e-mail | index | archive | help
At Mon, 14 Jun 1999 10:12:12 -0700 (PDT), you wrote: >Unless Win98 is a lot stupider than I think, I'll have a disk that >will add the IDE CD-ROM on the e-machines, but won't add either of the >SCSI CD-ROM's on the FreeBSD box with the CDRW on it. > > Thanx, > <mike > > > >On Mon, 14 Jun 1999, Kent Stewart wrote: > >> Date: Mon, 14 Jun 1999 09:57:38 -0700 >> From: Kent Stewart <kstewart@3-cities.com> >> To: Mike Meyer <mwm@phone.net> >> Cc: freebsd-stable@freebsd.org >> Subject: Re: Yamaha CD-R[W] drives (Re: Is the CD driver) >> >> Choose > Start > settings > control panel > add/remove progs > startup >> disk. When you finish creating a startup disk you have a Win98 DOS boot >> that will add your CDROM. You need one of these disks around for your >> e-machine anyway. >> >> Kent >> >> Mike Meyer wrote: >> > >> > Ok, so where do I find a DOS bootable floppy? The only MS box in the >> > house is the children's e-machine, running Windows 98... >> > >> > <mike >> > >> > On Mon, 14 Jun 1999, Peter Radcliffe wrote: >> > >> > > Date: Mon, 14 Jun 1999 11:16:55 -0400 >> > > From: Peter Radcliffe <pir@pir.net> >> > > To: freebsd-stable@FreeBSD.ORG >> > > Subject: Yamaha CD-R[W] drives (Re: Is the CD driver) >> > > >> > > Stephen Krzywicki <sek@superiorcam.com> probably said: >> > > > The latest firmware release from Yamaha may fix this problem. >> > > >> > > Speaking of firmware upgrades: >> > > >> > > http://www.yamahayst.com/techsup/flasrom.htm >> > > ] For Windows NT and/or UNIX-SGI Users: >> > > ] If you are operating under Windows NT or UNIX type environments, you >> > > ] must use the DOS Batch utility to upgrade the Yamaha Recorder. Boot >> > > ] from a DOS bootable Floppy, configured as shown below for your SCSI >> > > ] Card and then run the DOS batch upgrade utility. Otherwise, you must >> > > ] take our drive to a DOS, Windows 95, or Macintosh environment to >> > > ] upgrade our unit. >> > > >> > > http://www.yamahayst.com/techsup/cdr400fi.htm >> > > ] For Models (CDR400c, CDR400cx, CDR400t, CDR400tx, CDR400AT) >> > > ] Version NO.: 1.0q Inquiry Date: Nov. 11, '98 >> > > ] 1) Making the same firmware file usable for CDR's and CRW's. >> > > ] 2) Extended support for silver media. >> > > ] 3) Reducing the noise problem for reading CD-DA discs. >> > > >> > > Note the extended support for silver (cheepo) media. >> > > (similar comments in the CRW4260 section) >> > > >> > > If you're using a Yamaha CD-R[W], upgrade your firmware tp 1.0q >> > > >> > > P. >> > > >> > > -- >> > > pir pir@pir.net pir@shore.net pir@net.tufts.edu >> > > >> > > >> > > >> > > To Unsubscribe: send mail to majordomo@FreeBSD.org >> > > with "unsubscribe freebsd-stable" in the body of the message >> > > >> > >> > To Unsubscribe: send mail to majordomo@FreeBSD.org >> > with "unsubscribe freebsd-stable" in the body of the message >> >> -- >> Kent Stewart >> Richland, WA >> >> mailto:kstewart@3-cities.com >> http://www.3-cities.com/~kstewart/index.html >> >> >> To Unsubscribe: send mail to majordomo@FreeBSD.org >> with "unsubscribe freebsd-stable" in the body of the message >> > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-stable" in the body of the message > -=[Zeus]=- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199906141743.BAA23409>