Date: Wed, 30 Aug 2000 11:37:26 +0300 From: Odhiambo Washington <vedette@iconnect.co.ke> To: freebsd-questions@FreeBSD.ORG Subject: Re: pcm and sbc Message-ID: <20000830113726.B51789@siafu.iconnect.co.ke> In-Reply-To: <Pine.LNX.4.21.0008291252410.25241-100000@inconnu.isu.edu>; from John Galt on Tue, Aug 29, 2000 at 01:16:00PM -0600 References: <Pine.BSF.4.21.0008291125560.479-100000@localhost> <Pine.LNX.4.21.0008291252410.25241-100000@inconnu.isu.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
Quoting John Galt <galt@inconnu.isu.edu>: [000829 22:15]: May I also chip in with a problem that I also have and have never been able to sort out, but this is with Crystal 4236 on FBSD 4.1-S The unknowns.... just see the output of my dmesg. I can only play audio CDs by pressing the button on the drive, no MP3 palyers can work, though they give me no errors either... ## pcm0: <CS423x> at port 0x534-0x537,0x388-0x38b,0x220-0x22f irq 11 drq 1,0 on isa 0 unknown0: <GAME> at port 0x200-0x207 on isa0 unknown1: <CTRL> at port 0x120-0x127 on isa0 unknown2: <MPU> at port 0x330-0x331 on isa0 What can I do to get these 'unknown' be known?? Cheers guys.. John Galt> John Galt>The unknown0 is the joystick port that shares the plug with MIDI John Galt>(<sarc>clever, these Koreans...</sarc>). Why are you including sbc--The John Galt>OPL3-SAx is a WSS compat or a SB-pro compatible, neither of which FWIK John Galt>fits into the sbc driver? FYI my sound for the OPL3 is just the pcm line John Galt>(the 4.X version: device pcm, not the 3.X version: device John Galt>pcm0 at isa?...), and I'm running 4.0--in fact, I didn't even include the John Galt>PNPBIOS (despite the fact I should've: the PNP BIOS is a new thing for John Galt>me...). John Galt> John Galt> John Galt>On Tue, 29 Aug 2000, Brian Handy wrote: John Galt> John Galt>> Dear Questions, John Galt>> John Galt>> My sound card [again] doesn't work. It worked for a while, but at some John Galt>> recompile or another in the past ... two months, I lost it. MP3 players John Galt>> run, but don't give me any errors and no sound comes out. John Galt>> John Galt>> I'm running: John Galt>> John Galt>> FreeBSD lambic.physics.montana.edu 4.1-STABLE FreeBSD 4.1-STABLE #34: Tue John Galt>> Aug 29 10:13:40 MDT 2000 John Galt>> handy@lambic.physics.montana.edu:/usr/src/sys/compile/HANDY i386 John Galt>> John Galt>> This is current 4.1 as of about yesterday. John Galt>> John Galt>> The relevant lines [I think] from my config: John Galt>> John Galt>> options PNPBIOS John Galt>> device pcm0 at isa? irq 10 drq 1 flags 0x0 John Galt>> device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15 John Galt>> John Galt>> (PNPBIOS is a red herring here, from a previous attempt.) I've also tried John Galt>> John Galt>> options PNPBIOS John Galt>> device pcm John Galt>> device sbc John Galt>> John Galt>> John Galt>> dmesg: John Galt>> John Galt>> pcm1: <Yamaha OPL-SAx> at port 0x220-0x22f,0x530-0x537,0x388-0x38f,0x330-0x331,0x370-0x371 irq 5 drq 0,1 John Galt>> on isa0 John Galt>> unknown0: <OPL3-SA3 Snd System> at port 0x201 on isa0 John Galt>> John Galt>> I think this "unknown0" is my first sign of trouble. John Galt>> John Galt>> John Galt>> /dev/sndstat: John Galt>> John Galt>> FreeBSD Audio Driver (newpcm) Aug 28 2000 19:19:08 John Galt>> Installed devices: John Galt>> pcm1: <Yamaha OPL-SAx> at io 0x530 irq 5 drq 0:1 (1p/1r channels duplex) John Galt>> John Galt>> John Galt>> ...and I've re-made my sound devices with John Galt>> John Galt>> cd /dev; sh ./MAKEDEV snd0 John Galt>> John Galt>> (with a current MAKEDEV out of my src tree, just to make sure.) John Galt>> John Galt>> I'm out of ideas. I must have a problem with my config since it's giving John Galt>> me this 'unknown0', instead of something like 'sb[bleah]' back when it John Galt>> thought this thing was soundblaster-material. Any suggestions? I seem to John Galt>> go through this about every 8 months. :-( John Galt>> John Galt>> John Galt>> Thanks, John Galt>> John Galt>> Brian John Galt>> John Galt>> John Galt>> John Galt>> To Unsubscribe: send mail to majordomo@FreeBSD.org John Galt>> with "unsubscribe freebsd-questions" in the body of the message John Galt>> John Galt> John Galt>-- John Galt> John Galt>You have paid nothing for the preceding, therefore it's worth every penny John Galt>you've paid for it: if you did pay for it, might I remind you of the John Galt>immortal words of Phineas Taylor Barnum regarding fools and money? John Galt> John Galt>Who is John Galt? galt@inconnu.isu.edu, that's who! John Galt> John Galt> John Galt> John Galt>To Unsubscribe: send mail to majordomo@FreeBSD.org John Galt>with "unsubscribe freebsd-questions" in the body of the message -- Odhiambo Washington Systems Administrator Inter-Connect Ltd. 3rd Flr The Chancery Valley Rd PO Box 39519 Nairobi Tel: 254 2 711140 Fax: 254 2 718418 Be warned that typing \fBkillall \fIname\fP may not have the desired effect on non-Linux systems, especially when done by a privileged user. -From the killall manual page To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000830113726.B51789>