Date: Wed, 09 Aug 2000 12:00:44 -0400 From: Mike Tancsa <mike@sentex.net> To: "Kenneth D. Merry" <ken@kdm.org> Cc: questions@FreeBSD.ORG, hardware@FreeBSD.ORG Subject: Re: forcing which SCSI device to boot from Message-ID: <4.3.2.7.0.20000809115949.0296a970@marble.sentex.ca> In-Reply-To: <20000809100054.A93412@panzer.kdm.org> References: <4.3.2.7.0.20000809111509.05e3b600@marble.sentex.ca> <4.3.2.7.0.20000809111509.05e3b600@marble.sentex.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
At 10:00 AM 8/9/00 -0600, Kenneth D. Merry wrote:
>On Wed, Aug 09, 2000 at 11:16:51 -0400, Mike Tancsa wrote:
> >
> > I have an Adaptec 2940 and a 3ware IDE raid card. I have been booting
> from
> > the Adaptec, but when I put the 3ware card in, the drive insists on
> booting
> > from the 3ware. Apart from making a boot floppy disk, is there any way to
> > force the drive to boot from the Adaptec ?
>
>You can try swapping the slots they are in.
Thanks,
I tried that as well as assigning different IRQs (one higher than
the other), and still no dice. Someone else told me its based on the PROM
address :-(
---Mike
------------------------------------------------------------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications mike@sentex.net
Cambridge, Ontario Canada www.sentex.net
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.3.2.7.0.20000809115949.0296a970>