Date: Wed, 28 Jan 2009 11:09:32 -0500 From: Robert Noland <rnoland@FreeBSD.org> To: ykirill@yahoo.com Cc: freebsd-x11@freebsd.org Subject: Re: Problems with hardware rendering on i865 Message-ID: <1233158972.1733.9.camel@wombat.2hip.net> In-Reply-To: <642630.47221.qm@web58705.mail.re1.yahoo.com> References: <642630.47221.qm@web58705.mail.re1.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] On Wed, 2009-01-28 at 06:33 -0800, Kirill Yelizarov wrote: > Hi > > I have problems with hardware rendering configuration. I have all recent updates of Releng-7 and ports (xorg-7.4). glxgears shows about 28fps when full screen. How can i enable hardware rendering or i'm just wasting my time with this card? Any hints? > > Thank You, > Kirill > > P.S. Sorry, this letter is big > > Here is dmesg: > Copyright (c) 1992-2009 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.1-STABLE #0: Wed Jan 28 16:46:24 MSK 2009 > root@mysrv.faberlic.com:/usr/obj/usr/src/sys/MYSRV > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.52-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0x441d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,xTPR> > Logical CPUs per core: 2 > real memory = 1056108544 (1007 MB) > avail memory = 1023971328 (976 MB) > ACPI APIC Table: <INTEL D865GVHZ> > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > netsmb_dev: loaded > kbd1 at kbdmux0 > acpi0: <INTEL D865GVHZ> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, 3ef00000 (3) failed > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > vgapci0: <VGA-compatible display> port 0xec00-0xec07 mem 0xf0000000-0xf7ffffff,0xffa80000-0xffafffff irq 16 at device 2.0 on pci0 > agp0: <Intel 82865G (865G GMCH) SVGA controller> on vgapci0 > agp0: detected 16252k stolen memory > agp0: aperture size is 128M > drm0: <Intel i865G GMCH> on vgapci0 > vgapci0: child drm0 requested pci_enable_busmaster > info: [drm] AGP at 0xf0000000 128MB > info: [drm] Initialized i915 1.6.0 20080730 > ... I removed the rest of dmesg to save space > > My xorg.conf: > Section "Module" > Load "dbe" # Double buffer extension > Load "GLcore" > Load "freetype" > Load "glx" > Load "dri" > EndSection > > Section "Files" > FontPath "/usr/local/lib/X11/fonts/winfonts/" > FontPath "/usr/local/lib/X11/fonts/koi8-1/misc/" > FontPath "/usr/local/lib/X11/fonts/koi8-1/75dpi/" > FontPath "/usr/local/lib/X11/fonts/misc/" > FontPath "/usr/local/lib/X11/fonts/URW/" > EndSection > > Section "ServerFlags" > > EndSection > > Section "Monitor" > Identifier "Sony" > HorizSync 31.5 - 85.0 > VertRefresh 50-70 > Option "DPMS" "true" > EndSection > > Section "Device" > Identifier "I865" > Driver "intel" > VendorName "Intel Corporation" > Option "DRI" "true" > # Option "AccelMethod" "NONE" > Option "AccelMethod" "EXA" > Option "MigrationHeuristic" "greedy" > Option "ExaNoComposite" "false" > EndSection > > Section "Screen" > Identifier "LCD_Screen" > Device "I865" > Monitor "Sony" > DefaultDepth 24 > > Subsection "Display" > Depth 24 > Modes "1280x1024" > ViewPort 0 0 > Virtual 2040 2040 > EndSubsection > EndSection > > Section "ServerLayout" > Identifier "Simple Layout" > Option "AIGLX" "true" > Screen "LCD_Screen" > EndSection > > Section "DRI" > Group 0 > Mode 0666 > EndSection > > Section "Extensions" > Option "Composite" "Enable" > Option "RENDER" "Enable" > Option "DAMAGE" "Enable" > EndSection > > > And here is Xorg log: > X.Org X Server 1.5.3 > Release Date: 5 November 2008 > X Protocol Version 11, Revision 0 > Build Operating System: FreeBSD 7.1-STABLE i386 > Current Operating System: FreeBSD mysrv.faberlic.com 7.1-STABLE FreeBSD 7.1-STABLE #0: Wed Jan 28 16:46:24 MSK 2009 root@mysrv.faberlic.com:/usr/obj/usr/src/sys/MYSRV i386 > Build Date: 28 January 2009 12:25:29PM > > Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 28 17:04:03 2009 > (==) Using config file: "/etc/X11/xorg.conf" > (==) ServerLayout "Simple Layout" > (**) |-->Screen "LCD_Screen" (0) > (**) | |-->Monitor "Sony" > (**) | |-->Device "I865" > (**) Option "AIGLX" "true" > (==) Automatically adding devices > (==) Automatically enabling devices > (==) Including the default font path /usr/local/lib/X11/fonts/misc/,/usr/local/lib/X11/fonts/TTF/,/usr/local/lib/X11/fonts/OTF,/usr/local/lib/X11/fonts/Type1/,/usr/local/lib/X11/fonts/100dpi/,/usr/local/lib/X11/fonts/75dpi/. > (**) FontPath set to: > /usr/local/lib/X11/fonts/winfonts/, > /usr/local/lib/X11/fonts/koi8-1/misc/, > /usr/local/lib/X11/fonts/koi8-1/75dpi/, > /usr/local/lib/X11/fonts/misc/, > /usr/local/lib/X11/fonts/URW/, > /usr/local/lib/X11/fonts/misc/, > /usr/local/lib/X11/fonts/TTF/, > /usr/local/lib/X11/fonts/OTF, > /usr/local/lib/X11/fonts/Type1/, > /usr/local/lib/X11/fonts/100dpi/, > /usr/local/lib/X11/fonts/75dpi/ > (==) ModulePath set to "/usr/local/lib/xorg/modules" > (**) Extension "Composite" is enabled > (**) Extension "RENDER" is enabled > (**) Extension "DAMAGE" is enabled > (II) Cannot locate a core pointer device. > (II) Cannot locate a core keyboard device. > (II) The server relies on HAL to provide the list of input devices. > If no devices become available, reconfigure HAL or disable AllowEmptyInput. > (II) Loader magic: 0x81ab3c0 > (II) Module ABI versions: > X.Org ANSI C Emulation: 0.4 > X.Org Video Driver: 4.1 > X.Org XInput driver : 2.1 > X.Org Server Extension : 1.1 > X.Org Font Renderer : 0.6 > (II) Loader running on freebsd > (--) Using syscons driver with X support (version 2.0) > (--) using VT number 9 > > (--) PCI:*(0@0:2:0) Intel Corporation 82865G Integrated Graphics Controller rev 0, Mem @ 0xf0000000/0, 0xffa80000/0, I/O @ 0x0000ec00/0, BIOS @ 0x????????/65536 > (II) System resource ranges: > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) "extmod" will be loaded by default. > (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. > (II) "glx" will be loaded. This was enabled by default and also specified in the config file. > (II) "freetype" will be loaded. This was enabled by default and also specified in the config file. > (II) "record" will be loaded by default. > (II) "dri" will be loaded. This was enabled by default and also specified in the config file. > (II) LoadModule: "dbe" > > (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so > (II) Module dbe: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 1.1 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "freetype" > > (II) Loading /usr/local/lib/xorg/modules/fonts//libfreetype.so > (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" > compiled for 1.5.3, module version = 2.1.0 > Module class: X.Org Font Renderer > ABI class: X.Org Font Renderer, version 0.6 > (II) Loading font FreeType > (II) LoadModule: "glx" > > (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so > (II) Module glx: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 1.0.0 > ABI class: X.Org Server Extension, version 1.1 > (**) AIGLX enabled > (**) Exporting typical set of GLX visuals > (II) Loading extension GLX > (II) LoadModule: "dri" > > (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so > (II) Module dri: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 1.0.0 > ABI class: X.Org Server Extension, version 1.1 > (II) Loading extension XFree86-DRI > (II) LoadModule: "extmod" > > (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so > (II) Module extmod: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 1.1 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "record" > > (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so > (II) Module record: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 1.13.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 1.1 > (II) Loading extension RECORD > (II) LoadModule: "intel" > > (II) Loading /usr/local/lib/xorg/modules/drivers//intel_drv.so > (II) Module intel: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 2.5.1 > Module class: X.Org Video Driver > ABI class: X.Org Video Driver, version 4.1 > (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, > i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, > E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ, > 965GM, 965GME/GLE, G33, Q35, Q33, > Mobile Intel\u00ae GM45 Express Chipset, > Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 > (II) Primary Device is: PCI 00@00:02:0 > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) resource ranges after probing: > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > > (II) Loading /usr/local/lib/xorg/modules//libvgahw.so > (II) Module vgahw: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 0.1.0 > ABI class: X.Org Video Driver, version 4.1 > (**) intel(0): Depth 24, (--) framebuffer bpp 32 > (==) intel(0): RGB weight 888 > (==) intel(0): Default visual is TrueColor > (**) intel(0): Option "AccelMethod" "EXA" > (**) intel(0): Option "DRI" "true" > (II) intel(0): Integrated Graphics Chipset: Intel(R) 865G > (--) intel(0): Chipset: "865G" > (--) intel(0): Linear framebuffer at 0xF0000000 > (--) intel(0): IO registers at addr 0xFFA80000 > (**) intel(0): Using EXA for acceleration > (II) intel(0): 1 display pipe available. > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Module "ddc" already built-in > (II) Loading sub module "i2c" > (II) LoadModule: "i2c" > (II) Module "i2c" already built-in > (II) intel(0): Output VGA using monitor section Sony > (II) intel(0): I2C bus "DVODDC_D" initialized. > (II) Loading sub module "sil164" > (II) LoadModule: "sil164" > > (II) Loading /usr/local/lib/xorg/modules/drivers//sil164.so > (II) Module sil164: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 1.0.0 > ABI class: X.Org Video Driver, version 4.1 > (II) intel(0): I2C bus "DVOI2C_E" initialized. > (II) Loading sub module "ch7xxx" > (II) LoadModule: "ch7xxx" > > (II) Loading /usr/local/lib/xorg/modules/drivers//ch7xxx.so > (II) Module ch7xxx: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 1.0.0 > ABI class: X.Org Video Driver, version 4.1 > (II) intel(0): I2C bus "DVOI2C_E" removed. > (II) intel(0): I2C bus "DVOI2C_E" initialized. > (II) Loading sub module "ivch" > (II) LoadModule: "ivch" > > (II) Loading /usr/local/lib/xorg/modules/drivers//ivch.so > (II) Module ivch: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 1.0.0 > ABI class: X.Org Video Driver, version 4.1 > (II) intel(0): I2C bus "DVOI2C_E" removed. > (II) intel(0): I2C bus "DVOI2C_B" initialized. > (II) Loading sub module "tfp410" > (II) LoadModule: "tfp410" > > (II) Loading /usr/local/lib/xorg/modules/drivers//tfp410.so > (II) Module tfp410: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 1.0.0 > ABI class: X.Org Video Driver, version 4.1 > (II) intel(0): I2C bus "DVOI2C_B" removed. > (II) intel(0): I2C bus "DVOI2C_E" initialized. > (II) Loading sub module "ch7017" > (II) LoadModule: "ch7017" > > (II) Loading /usr/local/lib/xorg/modules/drivers//ch7017.so > (II) Module ch7017: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 1.0.0 > ABI class: X.Org Video Driver, version 4.1 > (II) intel(0): I2C bus "DVOI2C_E" removed. > (II) intel(0): I2C bus "DVOI2C_E" initialized. > (II) intel(0): I2C bus "DVOI2C_E" removed. > (II) intel(0): I2C bus "DVODDC_D" removed. > (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear > (II) intel(0): I2C bus "CRTDDC_A" initialized. > (II) intel(0): I2C bus "CRTDDC_A" removed. > (II) intel(0): I2C bus "CRTDDC_A" initialized. > (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. > (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. > (II) intel(0): I2C bus "CRTDDC_A" removed. > (II) intel(0): EDID vendor "SNY", prod id 10096 > (II) intel(0): Using hsync ranges from config file > (II) intel(0): Using vrefresh ranges from config file > (II) intel(0): Printing DDC gathered Modelines: > (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) > (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) > (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) > (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) > (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) > (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) > (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) > (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) > (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) > (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) > (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) > (II) intel(0): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz) > (II) intel(0): EDID vendor "SNY", prod id 10096 > (II) intel(0): Output VGA connected > (II) intel(0): Using user preference for initial modes > (II) intel(0): Output VGA using initial mode 1280x1024 > (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear > (II) intel(0): detected 128 kB GTT. > (II) intel(0): detected 16252 kB stolen memory. > (==) intel(0): video overlay key set to 0x101fe > (==) intel(0): Intel XvMC decoder disabled > (==) intel(0): Will not try to enable page flipping > (==) intel(0): Triple buffering disabled > (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) > (**) intel(0): Display dimensions: (340, 270) mm > (**) intel(0): DPI set to (152, 191) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > > (II) Loading /usr/local/lib/xorg/modules//libfb.so > (II) Module fb: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 1.0.0 > ABI class: X.Org ANSI C Emulation, version 0.4 > (II) Loading sub module "exa" > (II) LoadModule: "exa" > > (II) Loading /usr/local/lib/xorg/modules//libexa.so > (II) Module exa: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 2.4.0 > ABI class: X.Org Video Driver, version 4.1 > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Module "ramdac" already built-in > (II) intel(0): Comparing regs from server start up to After PreInit > (II) Loading sub module "dri" > (II) LoadModule: "dri" > > (II) Reloading /usr/local/lib/xorg/modules/extensions//libdri.so > (==) Depth 24 pixmap format is 32 bpp > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) > [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) > [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) > [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) > [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) > (II) intel(0): Kernel reported 241152 total, 0 used > (II) intel(0): I830CheckAvailableMemory: 964608 kB available > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 10, (OK) > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 10, (OK) > drmOpenByBusid: Searching for BusID pci:0000:00:02.0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 10, (OK) > drmOpenByBusid: drmOpenMinor returns 10 > drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 > (II) [drm] DRM interface version 1.2 > (II) [drm] DRM open master succeeded. > (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. > (II) intel(0): [drm] framebuffer mapped by ddx driver > (II) intel(0): [drm] added 1 reserved context for kernel > (II) intel(0): X context handle = 0x1 > (II) intel(0): [drm] installed DRM signal handler > (**) intel(0): Framebuffer compression disabled > (**) intel(0): Tiling enabled > (==) intel(0): VideoRam: 131072 KB > (II) intel(0): Attempting memory allocation with tiled buffers. > (WW) intel(0): Failed to allocate texture space. > (II) intel(0): Tiled allocation failed. > (II) intel(0): Attempting memory allocation with untiled buffers. > (WW) intel(0): Failed to allocate texture space. > (II) intel(0): Untiled allocation failed. > (II) intel(0): Couldn't allocate 3D memory, disabling DRI. > (II) intel(0): Attempting memory allocation with untiled buffers. > (II) intel(0): Untiled allocation successful. There is some problem on 855 class hardware with agp/drm and tiled buffers. I need to get a debugging build of agp to see if I can figure out what is going on. Try disabling tiled buffers and see if that helps. Option "Tiling" "off" in the Device section. robert. > (II) intel(0): Page Flipping disabled > (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 > (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear > (**) intel(0): Option "MigrationHeuristic" "greedy" > (**) intel(0): Option "EXANoComposite" "false" > (II) EXA(0): Offscreen pixmap area of 50135040 bytes > (II) EXA(0): Driver registered support for the following operations: > (II) Solid > (II) Copy > (II) Composite (RENDER acceleration) > (==) intel(0): Backing store disabled > (==) intel(0): Silken mouse enabled > (II) intel(0): Initializing HW Cursor > (II) intel(0): xf86BindGARTMemory: bind key 11 at 0x00fdf000 (pgoffset 4063) > (II) intel(0): xf86BindGARTMemory: bind key 12 at 0x00fe0000 (pgoffset 4064) > (II) intel(0): xf86BindGARTMemory: bind key 13 at 0x01fd0000 (pgoffset 8144) > (II) intel(0): Fixed memory allocation layout: > (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) > (II) intel(0): 0x00020000-0x00024fff: HW cursors (20 kB) > (II) intel(0): 0x00025000-0x0002cfff: logical 3D context (32 kB) > (II) intel(0): 0x0002d000-0x0012cfff: fake bufmgr (1024 kB) > (II) intel(0): 0x00fdf000: end of stolen memory > (II) intel(0): 0x00fdf000-0x00fdffff: overlay registers (4 kB, 0x000000000823b000 physical > ) > (II) intel(0): 0x00fe0000-0x01fcffff: front buffer (16320 kB) > (II) intel(0): 0x01fd0000-0x04f9ffff: exa offscreen (48960 kB) > (II) intel(0): 0x08000000: end of aperture > (II) intel(0): Output configuration: > (II) intel(0): Pipe A is on > (II) intel(0): Display plane A is now enabled and connected to pipe A. > (II) intel(0): Output VGA is connected to pipe A > (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. > (**) Option "dpms" "true" > (**) intel(0): DPMS enabled > (II) intel(0): Set up overlay video > (II) intel(0): direct rendering: Failed > (--) RandR disabled > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFIXES > (II) Initializing built-in extension RENDER > (II) Initializing built-in extension RANDR > (II) Initializing built-in extension COMPOSITE > (II) Initializing built-in extension DAMAGE > (II) Initializing built-in extension XEVIE > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 11, (OK) > drmOpenByBusid: Searching for BusID pci:0000:00:02.0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 11, (OK) > drmOpenByBusid: drmOpenMinor returns 11 > drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 > (EE) AIGLX error: Calling driver entry point failed(EE) AIGLX: reverting to software rendering > (II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so > (II) GLX: Initialized DRISWRAST GL provider for screen 0 > (II) intel(0): Setting screen physical size to 359 x 287 > (II) config/hal: Adding input device AT Keyboard > (II) LoadModule: "kbd" > > (II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so > (II) Module kbd: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 1.3.2 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 2.1 > (**) AT Keyboard: always reports core events > (**) Option "Protocol" "standard" > (**) AT Keyboard: Protocol: standard > (**) Option "AutoRepeat" "500 30" > (**) Option "XkbRules" "base" > (**) AT Keyboard: XkbRules: "base" > (**) Option "XkbModel" "pc105" > (**) AT Keyboard: XkbModel: "pc105" > (**) Option "XkbLayout" "us,ru" > (**) AT Keyboard: XkbLayout: "us,ru" > (**) Option "XkbVariant" ",winkeys" > (**) AT Keyboard: XkbVariant: ",winkeys" > (**) Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll" > (**) AT Keyboard: XkbOptions: "grp:ctrl_shift_toggle,grp_led:scroll" > (**) Option "CustomKeycodes" "off" > (**) AT Keyboard: CustomKeycodes disabled > (II) XINPUT: Adding extended input device "AT Keyboard" (type: KEYBOARD) > (II) config/hal: Adding input device PS/2 Mouse > (II) LoadModule: "mouse" > > (II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so > (II) Module mouse: vendor="X.Org Foundation" > compiled for 1.5.3, module version = 1.4.0 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 2.1 > (**) PS/2 Mouse: Device: "/dev/psm0" > (==) PS/2 Mouse: Protocol: "Auto" > (**) PS/2 Mouse: always reports core events > (**) Option "Device" "/dev/psm0" > (==) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 50 > (**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5 > (**) Option "EmulateWheel" "true" > (**) Option "EmulateWheelButton" "2" > (**) Option "EmulateWheelTimeout" "200" > (**) Option "XAxisMapping" "4 5" > (**) PS/2 Mouse: XAxisMapping: buttons 4 and 5 > (**) Option "YAxisMapping" "6 7" > (**) PS/2 Mouse: YAxisMapping: buttons 6 and 7 > (**) PS/2 Mouse: EmulateWheel, EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 > (**) PS/2 Mouse: Buttons: 11 > (**) PS/2 Mouse: Sensitivity: 1 > (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE) > (II) PS/2 Mouse: SetupAuto: hw.iftype is 3, hw.model is 10 > (II) PS/2 Mouse: SetupAuto: protocol is ExplorerPS/2 > (II) PS/2 Mouse: ps2EnableDataReporting: succeeded > (WW) fcntl(12, O_ASYNC): Inappropriate ioctl for device > (II) intel(0): I2C bus "CRTDDC_A" initialized. > (II) intel(0): I2C bus "CRTDDC_A" removed. > (II) intel(0): I2C bus "CRTDDC_A" initialized. > (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. > (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. > (II) intel(0): I2C bus "CRTDDC_A" removed. > (II) intel(0): EDID vendor "SNY", prod id 10096 > (II) intel(0): Using hsync ranges from config file > (II) intel(0): Using vrefresh ranges from config file > (II) intel(0): Printing DDC gathered Modelines: > (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) > (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) > (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) > (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) > (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) > (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) > (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) > (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) > (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) > (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) > (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) > (II) intel(0): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz) > (II) intel(0): EDID vendor "SNY", prod id 10096 > (II) intel(0): I2C bus "CRTDDC_A" initialized. > (II) intel(0): I2C bus "CRTDDC_A" removed. > (II) intel(0): I2C bus "CRTDDC_A" initialized. > (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. > (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. > (II) intel(0): I2C bus "CRTDDC_A" removed. > (II) intel(0): EDID vendor "SNY", prod id 10096 > (II) intel(0): Using hsync ranges from config file > (II) intel(0): Using vrefresh ranges from config file > (II) intel(0): Printing DDC gathered Modelines: > (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) > (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) > (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) > (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) > (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) > (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) > (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) > (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) > (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) > (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) > (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) > (II) intel(0): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz) > (II) intel(0): EDID vendor "SNY", prod id 10096 > (II) intel(0): I2C bus "CRTDDC_A" initialized. > (II) intel(0): I2C bus "CRTDDC_A" removed. > (II) intel(0): I2C bus "CRTDDC_A" initialized. > (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. > (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. > (II) intel(0): I2C bus "CRTDDC_A" removed. > (II) intel(0): EDID vendor "SNY", prod id 10096 > (II) intel(0): Using hsync ranges from config file > (II) intel(0): Using vrefresh ranges from config file > (II) intel(0): Printing DDC gathered Modelines: > (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) > (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) > (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) > (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) > (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) > (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) > (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) > (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) > (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) > (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) > (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) > (II) intel(0): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz) > (II) intel(0): EDID vendor "SNY", prod id 10096 > (II) intel(0): I2C bus "CRTDDC_A" initialized. > (II) intel(0): I2C bus "CRTDDC_A" removed. > (II) intel(0): I2C bus "CRTDDC_A" initialized. > (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. > (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. > (II) intel(0): I2C bus "CRTDDC_A" removed. > (II) intel(0): EDID vendor "SNY", prod id 10096 > (II) intel(0): Using hsync ranges from config file > (II) intel(0): Using vrefresh ranges from config file > (II) intel(0): Printing DDC gathered Modelines: > (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) > (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) > (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) > (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) > (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) > (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) > (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) > (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) > (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) > (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) > (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) > (II) intel(0): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz) > (II) intel(0): EDID vendor "SNY", prod id 10096 > (II) intel(0): I2C bus "CRTDDC_A" initialized. > (II) intel(0): I2C bus "CRTDDC_A" removed. > (II) intel(0): I2C bus "CRTDDC_A" initialized. > (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. > (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. > (II) intel(0): I2C bus "CRTDDC_A" removed. > (II) intel(0): EDID vendor "SNY", prod id 10096 > (II) intel(0): Using hsync ranges from config file > (II) intel(0): Using vrefresh ranges from config file > (II) intel(0): Printing DDC gathered Modelines: > (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) > (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) > (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) > (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) > (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) > (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) > (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) > (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) > (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) > (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) > (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) > (II) intel(0): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz) > (II) intel(0): EDID vendor "SNY", prod id 10096 > > > > > > _______________________________________________ > freebsd-x11@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-x11 > To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org" [-- Attachment #2 --] -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.10 (FreeBSD) iEYEABECAAYFAkmAgzwACgkQM4TrQ4qfROOD9wCeOfZ1KfOujcmRnlzKmeiNSqBZ npEAnjSxF1SZ95kmWLLz3EqRlVUhCc3b =j3WH -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1233158972.1733.9.camel>