Date: Wed, 15 Feb 2006 07:29:53 -0500 From: "Steve Douville" <fbsd@douville.net> To: <freebsd-questions@freebsd.org> Subject: Re: IP Routing Question Message-ID: <006a01c6322b$862bfc90$6501a8c0@sdouvilnonq1> References: <02ca01c6316c$ce4b2ce0$c5eb020a@sdouvilnonq1><43F2252D.8060605@mykitchentable.net><000a01c6319b$56bf5730$6501a8c0@sdouvilnonq1><43F2323D.4040601@mykitchentable.net><001701c6319e$ed94bee0$6501a8c0@sdouvilnonq1> <43F2361C.7080400@mykitchentable.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Well, the solution ended up just setting up the rule for the subnet, not the host... route add aaa.bbb.ccc.200/29 aaa.bbb.ccc.200 -interface Had to move some IP addresses, but at least the traffic is going to the right ethernet controller now. Thanks for the help! ----- Original Message ----- From: "Drew Tomlinson" <drew@mykitchentable.net> To: "Steve Douville" <fbsd@douville.net> Cc: "FreeBSD Questions" <freebsd-questions@freebsd.org> Sent: Tuesday, February 14, 2006 2:57 PM Subject: Re: IP Routing Question On 2/14/2006 11:43 AM Steve Douville wrote: > By default, it sets the netif to em0 > OK, then what about 'route add -host aaa.bbb.ccc.209 aaa.bbb.ccc.200'? And if that doesn't work, can I please see 'netstat -rn'? You can obfuscate the IPs if you wish. Cheers, Drew > ----- Original Message ----- > From: "Drew Tomlinson" <drew@mykitchentable.net> > To: "Steve Douville" <steve@douville.net> > Cc: "FreeBSD Questions" <freebsd-questions@freebsd.org> > Sent: Tuesday, February 14, 2006 2:40 PM > Subject: Re: IP Routing Question > > > On 2/14/2006 11:17 AM Steve Douville wrote: > >> Weird stuff... >> route add -host aaa.bbb.ccc.209 aaa.bbb.ccc.196 -ifp em1 >> >> > > What happens if you leave off the "-ifp em1"? > > Cheers, > > Drew > > >> doesn't work even if i've already set >> aaa.bbb.ccc.196 link#2 em1 >> >> The only way things work well is if the gateway is set to link#2. The >> only >> way I can set it to link#2 is if the address was accessed, >> unsuccessfully, >> creating a record with link#1 as the gateway and then issuing a route >> change >> command to move it to link#2. >> >> it'd be much easier if i could just type >> route add -host aaa.bbb.ccc.xxx link#2 -ifp em1 >> but it doesn't recognize link#2 as a valid address, even though it uses >> it >> in the table by default!! >> >> Haven't tried the ipfilter yet. Maybe i'll give that a whirl, too. >> ----- Original Message ----- >> From: "Drew Tomlinson" <drew@mykitchentable.net> >> To: "Steve Douville" <fbsd@douville.net> >> Cc: <freebsd-questions@freebsd.org> >> Sent: Tuesday, February 14, 2006 1:45 PM >> Subject: Re: IP Routing Question >> >> >> >> What happens with a simple 'route add <certain ip address> >> aaa.bbb.ccc.196? Or am I misinterpreting what you wish to achieve? >> >> HTH, >> >> Drew >> _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?006a01c6322b$862bfc90$6501a8c0>