Date: Thu, 2 Mar 2006 15:23:45 -0500 (EST) From: Gardner Bell <gbell72@rogers.com> To: freebsd-amd64@freebsd.org Subject: RE: Tyan GT24 - Thunder K8SRE mainboard Message-ID: <20060302202345.10804.qmail@web88001.mail.re2.yahoo.com>
next in thread | raw e-mail | index | archive | help
On Tuesday 24 January 2006 23:30, Ken Gunderson wrote: > Would you mind elaborating on your current status with this box and > what BIOS version you're referencing? I can confirm that the Tyan K8SRE motherboard is functional with 6.0. To solve the issues with the BCM5704C not being able to map memory you need to unset acpi_load at the boot prompt. BIOS date 09/28/05 Revision: 2891_201. Here is a copy of dmesg: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE-p5 #1: Thu Mar 2 14:04:54 EST 2006 root@webmail.etob.phub.net.cable.rogers.com:/usr/obj/usr/src/sys/AMD64 ACPI APIC Table: <PTLTD APIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Opteron(tm) Processor 242 (1607.42-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0xf5a Stepping = 10 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow> real memory = 1072758784 (1023 MB) avail memory = 1028419584 (980 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 1.1> irqs 0-23 on motherboard ioapic1 <Version 1.1> irqs 24-27 on motherboard ioapic2 <Version 1.1> irqs 28-31 on motherboard acpi0: <PTLTD RSDT> on motherboard acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNK1> irq 0 on acpi0 pci_link1: <ACPI PCI Link LNK2> irq 0 on acpi0 pci_link2: <ACPI PCI Link LNK3> irq 0 on acpi0 pci_link3: <ACPI PCI Link LNK4> irq 0 on acpi0 pci_link4: <ACPI PCI Link LNK5> irq 0 on acpi0 pci_link5: <ACPI PCI Link LSMB> irq 0 on acpi0 pci_link6: <ACPI PCI Link LUS0> irq 0 on acpi0 pci_link7: <ACPI PCI Link LUS2> irq 0 on acpi0 pci_link8: <ACPI PCI Link LMAC> irq 0 on acpi0 pci_link9: <ACPI PCI Link LACI> irq 0 on acpi0 pci_link10: <ACPI PCI Link LMCI> irq 0 on acpi0 pci_link11: <ACPI PCI Link LPID> irq 0 on acpi0 pci_link12: <ACPI PCI Link LTID> irq 0 on acpi0 pci_link13: <ACPI PCI Link LSI1> irq 0 on acpi0 pci_link14: <ACPI PCI Link APCP> irq 0 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) atapci0: <nVidia nForce4 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1400-0x140f at device 6.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 7.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci8: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 10.0 on pci8 pci9: <ACPI PCI bus> on pcib4 pci8: <base peripheral, interrupt controller> at device 10.1 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 11.0 on pci8 pci10: <ACPI PCI bus> on pcib5 bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem 0xdf310000-0xdf31ffff,0xdf300000-0xdf30ffff irq 28 at device 9.0 on pci10 miibus0: <MII bus> on bge0 brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:e0:81:2e:c1:aa bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem 0xdf330000-0xdf33ffff,0xdf320000-0xdf32ffff irq 29 at device 9.1 on pci10 miibus1: <MII bus> on bge1 brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:e0:81:2e:c1:ab pci8: <base peripheral, interrupt controller> at device 11.1 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd0: [GIANT-LOCKED] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppi0: <Parallel I/O> on ppbus0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcafff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ad0: 19595MB <MAXTOR 6L020J1 AR1.0500> at ata0-master UDMA133 acd0: CDRW <52X24X52 CD-RW 1.06 20030129/1.06> at ata1-master UDMA33 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060302202345.10804.qmail>