Date: Thu, 07 Dec 2006 19:55:15 -0800 From: Nate Lawson <nate@root.org> To: Ian Smith <smithi@nimnet.asn.au> Cc: freebsd-acpi@freebsd.org Subject: Re: screen dead after resume on Thinkpad X30 Message-ID: <4578E223.8060302@root.org> In-Reply-To: <Pine.BSF.3.96.1061207154836.3815C-100000@gaia.nimnet.asn.au> References: <Pine.BSF.3.96.1061207154836.3815C-100000@gaia.nimnet.asn.au>
next in thread | previous in thread | raw e-mail | index | archive | help
Ian Smith wrote:
> On Thu, 7 Dec 2006, Lutz Boehne wrote:
>
> > I'm tracking RELENG_6 and after one upgrade, my Thinkpad X30 does not
> > properly wake up out of standby anymore. After waking up, the laptop
> > will still respond to key presses and I am able to reboot it by pressing
> > Ctrl-Alt-Del, but nothing will appear on the screen until I see the BIOS
> > POST.
> >
> > I spent some time to narrow down which changes in RELENG_6 seem to be
> > responsible and found out that RELENG_6 from August 16th 2006 12:01am
> > works fine and that RELENG_6 from 08:00pm that day does not.
> >
> > Candidate files are:
> > src/sys/dev/acpica/acpi_video.c
> > src/sys/i386/acpica/acpi_machdep.c
> > src/sys/i386/acpica/acpi_wakecode.S
> > src/sys/i386/acpica/acpi_wakeup.c
> >
> > I locally replaced those files in today's RELENG_6 with versions from
> > before August 16th, built/installed kernel and world and resume works
> > properly again.
>
> Not sure if it's your {,only} problem, but the default value for
> hw.acpi.reset_video changed fairly recently, I think from 1 to 0, as I
> had to set hw.acpi.reset_video=0 in /etc/sysctl.conf on a Thinkpad T23
> on 6.1-RELEASE. You'll find recent references to this in the archives.
>
> Try hardwiring the value from your working version into sysctl.conf.
>
> FWIW, I also needed hw.syscons.sc_no_suspend_vtswitch=1 on the T23.
Thanks for answering. The reason why the default is now 0 is that it
caused some systems to spontaneously reset if it was 1. I did a quick
check and it seemed that 1 causes more trouble overall than 0 so 0 is
the default.
--
Nate
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4578E223.8060302>