Date: Wed, 17 May 2000 19:52:12 -0400 From: Spike Gronim <william@brainlink.com> To: freebsd-questions@freebsd.org Subject: AWE64 PNP Vs. Netgear FA310TX Message-ID: <20000517195212.A532@spike.brainlink.com>
next in thread | raw e-mail | index | archive | help
Hey.
Right after I figure out that in order for my Soundblaster AWE64
to work with sbc and pcm under 4.0-STABLE by enabling 'PNP OS' in my BIOS,
it turns out that this setting in my BIOS causes my Netgear NIC to stop
working.
The system, freshly cvsup'd:
FreeBSD spike.brainlink.com 4.0-STABLE FreeBSD 4.0-STABLE #0:
Wed May 17 17:04:39 EDT 2000
spork@spike.brainlink.com:/usr/obj/usr/src/sys/ZALEM4 i386
The symptoms:
With PNP enabled:
dc0: <82c169 PNIC 10/100BaseTX> irq 9 at device 14.0 on pci0
dc0: couldn't map ports/memory
[..snip..]
sbc0: <Creative SB AWE64> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq
5 drq 1,5 on isa0
sbc0: setting card to irq 5, drq 1, 5
pcm0: <SB DSP 4.16> on sbc0
pcm: setmap c000, 2000; 0xcd1e0000 -> c000
pcm: setmap e000, 2000; 0xcd1e2000 -> e000
unknown0: <Game> at port 0x200-0x207 on isa0
unknown1: <WaveTable> at port 0x620-0x623 on isa0
Without PNP:
dc0: <82c169 PNIC 10/100BaseTX> port 0xf400-0xf4ff mem
0xfedfec00-0xfedfecff irq 9 at device 14.0 on pci0
dc0: Ethernet address: 00:a0:cc:65:55:7b
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
The sound card makes no appearance in dmesg if 'PNP OS' is not
enabled. I've tried every free PCI slot in my system (2), and also tried
moving my AHA-2940 around and using it's PCI slot for the NIC. The AHA
works wherever I put it, the NIC works wherever I put if 'PNP OS' is not
enabled. If I remove the AWE64 and my modem (the only two ISA PNP devices
in the system not attached to my motherboard) the NIC still refuses to
function with 'PNP OS' turned on. I've attached full dmesgs with and
without PNP and my kernel config file. I'm stuck as to why this doesn't
work; does anybody know? Thank you, and please cc: directly to me as I am
not subscribed to the list.
--
--Spike Gronim
gronimw@stuy.edu
"Oh yes? An obscene triangle which, has more courage than the word."
(verbose) dmesg with PNP:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-STABLE #0: Wed May 17 17:04:39 EDT 2000
spork@spike.brainlink.com:/usr/obj/usr/src/sys/ZALEM4
Calibrating clock(s) ... TSC clock: 299937534 Hz, i8254 clock: 1193167 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 299942280 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (299.94-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x634 Stepping = 4
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 268435456 (262144K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0031e000 - 0x0fff7fff, 265134080 bytes (64730 pages)
avail memory = 257650688 (251612K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f7550
bios32: Entry = 0xfd7b1 (c00fd7b1) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x21c
pnpbios: Found PnP BIOS data at 0xc00f7570
pnpbios: Entry = f0000:b78d Rev = 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc0305000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03050a8.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71808086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71808086)
pcib0: <Intel 82443LX (440 LX) host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7180, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base f8000000, size 26
found-> vendor=0x8086, dev=0x7181, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x7110, revid=0x01
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000fcf0, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=11
found-> vendor=0x8086, dev=0x7113, revid=0x01
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 00007000, size 4
found-> vendor=0x9004, dev=0x8178, revid=0x00
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=14
map[10]: type 1, range 32, base 0000f800, size 8
map[14]: type 1, range 32, base fedff000, size 12
found-> vendor=0x11ad, dev=0x0002, revid=0x20
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
found-> vendor=0x11ad, dev=0x0002, revid=0x20
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443LX (440 LX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
found-> vendor=0x102b, dev=0x051f, revid=0x00
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base f6000000, size 24
map[14]: type 1, range 32, base fecf8000, size 14
map[18]: type 1, range 32, base fe000000, size 23
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA Millennium II 2164WA-B AG graphics accelerator> (vendor=0x102b, dev=0x051f) at 0.0 irq 9
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcf0
ata0: mask=00 status0=ff status1=ff
ata0: probe allocation failed
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcf8
ata1: mask=03 status0=50 status1=00
ata1: mask=03 status0=50 status1=00
ata1: devices = 0x1
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> (vendor=0x8086, dev=0x7112) at 7.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0x7000-0x700f at device 7.3 on pci0
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xf800-0xf8ff mem 0xfedff000-0xfedfffff irq 14 at device 13.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable not present, internal 68 cable is present
ahc0: external cable is present
ahc0: BIOS eeprom is present
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc0: Downloading Sequencer Program... 415 instructions downloaded
dc0: <82c169 PNIC 10/100BaseTX> irq 9 at device 14.0 on pci0
dc0: couldn't map ports/memory
device_probe_and_attach: dc0 attach returned 6
dc1: <82c169 PNIC 10/100BaseTX> irq 10 at device 15.0 on pci0
dc1: couldn't map ports/memory
device_probe_and_attach: dc1 attach returned 6
Trying Read_Port at 203
CTL0045: start dependant
CTL0045: adding irq mask 0x20
CTL0045: adding dma mask 0x2
CTL0045: adding dma mask 0x20
CTL0045: adding io range 0x220-0x22f, size=0x10, align=0x1
CTL0045: adding io range 0x330-0x331, size=0x2, align=0x1
CTL0045: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0045: start dependant
CTL0045: adding irq mask 0x6a0
CTL0045: adding dma mask 0xb
CTL0045: adding dma mask 0xe0
CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0045: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0045: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0045: start dependant
CTL0045: adding irq mask 0x6a0
CTL0045: adding dma mask 0xb
CTL0045: adding dma mask 0xe0
CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0045: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0045: start dependant
CTL0045: adding irq mask 0x6a0
CTL0045: adding dma mask 0xb
CTL0045: adding dma mask 0xe0
CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0045: start dependant
CTL0045: adding irq mask 0x6a0
CTL0045: adding dma mask 0xb
CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0045: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0045: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0045: start dependant
CTL0045: adding irq mask 0x6a0
CTL0045: adding dma mask 0xb
CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0045: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0045: start dependant
CTL0045: adding irq mask 0x6a0
CTL0045: adding dma mask 0xb
CTL0045: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0045: start dependant
isa0: too many dependant configs (8)
CTL7002: start dependant
CTL7002: adding io range 0x200-0x207, size=0x8, align=0x1
CTL7002: start dependant
CTL7002: adding io range 0x200-0x20f, size=0x8, align=0x8
CTL7002: end dependant
CTL0022: start dependant
CTL0022: adding io range 0x620-0x623, size=0x4, align=0x1
CTL0022: start dependant
CTL0022: adding io range 0x620-0x683, size=0x4, align=0x20
CTL0022: end dependant
isa0: unexpected small tag 14
USR2070: start dependant
USR2070: adding io range 0x2f8-0x2ff, size=0x8, align=0x8
USR2070: adding irq mask 0xa8
USR2070: start dependant
USR2070: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
USR2070: adding irq mask 0xbc
USR2070: start dependant
USR2070: adding io range 0x3e8-0x3ef, size=0x8, align=0x8
USR2070: adding irq mask 0xbc
USR2070: start dependant
USR2070: adding io range 0x2e8-0x2ef, size=0x8, align=0x8
USR2070: adding irq mask 0xbc
USR2070: end dependant
ata-: ata0 exists, using next available unit number
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000
ata2: mask=00 status0=ff status1=ff
ata2: probe allocation failed
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
ppc0: parallel port found at 0x378
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
isa_probe_children: probing PnP devices
sbc0: <Creative SB AWE64> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0
sbc0: setting card to irq 5, drq 1, 5
pcm0: <SB DSP 4.16> on sbc0
pcm: setmap c000, 2000; 0xcd1e0000 -> c000
pcm: setmap e000, 2000; 0xcd1e2000 -> e000
unknown0: <Game> at port 0x200-0x207 on isa0
unknown1: <WaveTable> at port 0x620-0x623 on isa0
sio2: irq maps: 0x41 0x49 0x41 0x41
sio2: <U.S.Robotics Inc. Sportster 56000 Voice Internal> at port 0x2f8-0x2ff irq 3 on isa0
sio2: type 16550A
BIOS Geometries:
0:0209fe3f 0..521=522 cylinders, 0..254=255 heads, 1..63=63 sectors
1:0111fe3f 0..273=274 cylinders, 0..254=255 heads, 1..63=63 sectors
2:03fdfe3f 0..1021=1022 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, unlimited logging
bpf: lo0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: stf0 attached
bpf: faith0 attached
IPsec: Initialized Security Association Processing.
ata1-master: success setting up UDMA2 mode on PIIX4 chip
ad0: <IBM-DPTA-372050/P76OA30A> ATA-4 disk at ata1 as master
ad0: 19574MB (40088160 sectors), 39770 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 32 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
Creating DISK ad0
Creating DISK wd0
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
Sending WDTR!
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 10.0MHz, offset = 0x8
Sending SDTR!
(probe5:ahc0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe5:ahc0:0:5:0): ILLEGAL REQUEST asc:24,0
(probe5:ahc0:0:5:0): Invalid field in CDB
ahc0: target 1 using asynchronous transfers
ahc0: target 1 synchronous at 10.0MHz, offset = 0x8
ahc0: target 5 synchronous at 10.0MHz, offset = 0xf
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 20.0MHz, offset = 0x8
Creating DISK da0
Creating DISK da1
Creating DISK cd0
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <WDIGTL WDE4360-1807A3 1.80> Fixed Direct Access SCSI-2 device
pass0: Serial Number WS7010665397
pass0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
pass1 at ahc0 bus 0 target 1 lun 0
pass1: <IBMRISC DFHSS2W 4242> Fixed Direct Access SCSI-2 device
pass1: Serial Number 68C52281
pass1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
pass2 at ahc0 bus 0 target 5 lun 0
pass2: <NEC CD-ROM DRIVE:464 1.04> Removable CD-ROM SCSI-2 device
pass2: 10.000MB/s transfers (10.000MHz, offset 15)
Mounting root from ufs:/dev/da0s1a
(cd0:ahc0:0:5:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ahc0:0:5:0): NOT READY asc:3a,0
(cd0:ahc0:0:5:0): Medium not present
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <NEC CD-ROM DRIVE:464 1.04> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 0 lun 0
da0: <WDIGTL WDE4360-1807A3 1.80> Fixed Direct Access SCSI-2 device
da0: Serial Number WS7010665397
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
da0: 4095MB (8388314 512 byte sectors: 255H 63S/T 522C)
da0s1: type 0xa5, start 53, end = 8388309, size 8388257 : OK
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBMRISC DFHSS2W 4242> Fixed Direct Access SCSI-2 device
da1: Serial Number 68C52281
da1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 2150MB (4404489 512 byte sectors: 255H 63S/T 274C)
start_init: trying /sbin/init
ad0: invalid primary partition table: no magic
ad0: invalid primary partition table: no magic
Linux-ELF exec handler installed
/dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-438 $
/dev/vmmon: Module vmmon: initialized
bpf: vmnet1 attached
bpf: tun0 attached
tun0: promiscuous mode enabled
dmesg without PNP:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-STABLE #0: Wed May 17 17:04:39 EDT 2000
spork@spike.brainlink.com:/usr/obj/usr/src/sys/ZALEM4
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 299942745 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (299.94-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x634 Stepping = 4
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 268435456 (262144K bytes)
avail memory = 257650688 (251612K bytes)
Preloaded elf kernel "kernel" at 0xc0305000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc030509c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443LX (440 LX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443LX (440 LX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA Millennium II 2164WA-B AG graphics accelerator> at 0.0 irq 9
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcd0-0xfcdf at device 7.1 on pci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0x7000-0x700f at device 7.3 on pci0
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xf800-0xf8ff mem 0xfedff000-0xfedfffff irq 14 at device 13.0 on pci0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
dc0: <82c169 PNIC 10/100BaseTX> port 0xf400-0xf4ff mem 0xfedfec00-0xfedfecff irq 9 at device 14.0 on pci0
dc0: Ethernet address: 00:a0:cc:65:55:7b
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio2: <U.S.Robotics Inc. Sportster 56000 Voice Internal> at port 0x2f8-0x2ff irq 3 on isa0
sio2: type 16550A
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, unlimited logging
IPsec: Initialized Security Association Processing.
ad0: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata1-master using UDMA33
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <NEC CD-ROM DRIVE:464 1.04> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 0 lun 0
da0: <WDIGTL WDE4360-1807A3 1.80> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
da0: 4095MB (8388314 512 byte sectors: 255H 63S/T 522C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBMRISC DFHSS2W 4242> Fixed Direct Access SCSI-2 device
da1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 2150MB (4404489 512 byte sectors: 255H 63S/T 274C)
/dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-438 $
/dev/vmmon: Module vmmon: initialized
tun0: promiscuous mode enabled
Kernel config file:
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.freebsd.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
machine i386
cpu I686_CPU
ident ZALEM
maxusers 256
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options SOFTUPDATES
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPSEC
options IPSEC_ESP
#options PNPBIOS
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
device isa
device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device ahc # AHA2940 and onboard AIC7xxx devices
# SCSI peripherals
device scbus # SCSI bus (required)
device da # Direct Access (disks)
device cd # CD
device pass # Passthrough device (direct SCSI access)
#IDE.
device ata0 at isa? port IO_WD1 irq 14
device ata
device atadisk
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# syscons is the default console driver, resembling an SCO console
device sc0 at isa?
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device ppi # Parallel port interface device
device miibus # MII bus support
device dc # DEC/Intel 21143 and various workalikes
#Sound
device sbc0
device pcm0
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif 4 # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000517195212.A532>