From owner-freebsd-isdn Thu Jan 8 09:07:09 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.7/8.8.7) id JAA02924 for isdn-outgoing; Thu, 8 Jan 1998 09:07:09 -0800 (PST) (envelope-from owner-freebsd-isdn@FreeBSD.ORG) Received: from meister.juradata.de (meister.juradata.de [195.214.64.190]) by hub.freebsd.org (8.8.7/8.8.7) with SMTP id JAA02894 for ; Thu, 8 Jan 1998 09:06:44 -0800 (PST) (envelope-from hitzfeld@juradata.de) Received: from schule7.juradata.de (schule7 [195.214.64.167]) by meister.juradata.de (8.6.9/8.6.9) with SMTP id SAA01638; Thu, 8 Jan 1998 18:01:28 +0100 Message-ID: <34B5138D.1A55@juradata.de> Date: Thu, 08 Jan 1998 18:57:33 +0100 From: "hitzfeld@juradata.de" Reply-To: hitzfeld@juradata.de X-Mailer: Mozilla 3.01Gold [de] (Win95; I) MIME-Version: 1.0 To: Volker Stolz CC: freebsd-isdn@FreeBSD.ORG Subject: Re: Trouble with S0.16 References: <199801081244.NAA16013@peel.Informatik.RWTH-Aachen.DE> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Volker Stolz wrote: > I have a Teles S0.16-board which is not detected on FreeBSD-boot-up. > It always says "tel0 not found at 0x...", of course I tested .. As far as I know there is no real problem to get it work, but you may apologize, I'M not a guru :-) Try to get bisdntest-3, read the README there and check if you came this way - Check the type of Teles S0.16 you have; perhaps look at some Linux/ Hisax-documentations to get an impression. Most probabliy you have a new type of card, which is to configure by software (do so under DOS) - Try to get the Teles work in another environment, in preference on the same system (under DOS, Windows ..) - Check iomem-collisions concerning Video or (!)Netadapters - If you take iomem 0xd0000 (16.3 is rather seldom I think) really type 0xd0000 and not 0xd000 - Why not trying irq 9 ? You can take irq 2 on the card, it's stable (here)- Timm Hitzfeld Juradata GmbH Muenchen