Date: Tue, 11 Apr 2000 19:53:28 -0500 (EST) From: Jonathan Smith <jonsmith@dragonstar.dhs.org> To: freebsd-current@freebsd.org Subject: Quickie question on UDMA/33 Message-ID: <Pine.BSF.4.21.0004111944280.52908-100000@dragonstar.dhs.org>
next in thread | raw e-mail | index | archive | help
I looked through the archives but I didn't see much current on the
subject (esp. under 4.0).
I have two different machines, both with AsusP5A motherboards and
Western Digital Caviar hard drives that should support UDMA/33, as should
the Chipset.
Both boot up, trying UDMA mode, throwing ICRC READ ERROR's then kick back
down to PIO mode 4.
They each have _different_ Caviar drives, one's running 66 MHz on the
motherboard (older K6/2-300) the other 100 MHz (newer K6/2-450). FWIW,
the Sony DVD-ROM in the latter machine also dislikes running at DMA
mode.
Bios's are set to do auto-chose pio/dma modes.
I've resolved to simply adding in the rc to reset them to pio mode, to get
it over with (but I still get the errors at boot-up prior to the rc doing
them).
I simply use 'device ata' etc. forms in the knerel config.
Thanks
dmesg
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-STABLE #0: Fri Apr 7 11:58:05 EST 2000
jonsmith@dragonstar.dhs.org:/net/dragonstar/project/FreeBSD/4-STABLE/src/sys/compile/DRAGONSTAR
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 300682509 Hz
CPU: AMD-K6(tm) 3D processor (300.68-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 134201344 (131056K bytes)
avail memory = 127262720 (124280K bytes)
Preloaded elf kernel "kernel" at 0xc033a000.
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5243 PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <S3 ViRGE GX2 graphics accelerator> at 0.0 irq 11
chip1: <AcerLabs M15x3 Power Management Unit> at device 3.0 on pci0
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xd800-0xd81f irq 10 at device 9.0 on pci0
ed0: supplying EUI64: 00:40:33:ff:fe:98:c9:da
ed0: address 00:40:33:98:c9:da, type NE2000 (16 bit)
atapci0: <AcerLabs Aladdin ATA33 controller> port 0xd400-0xd40f irq 0 at device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ep0: <3Com 3C509-TP EtherLink III> at port 0x340-0x34f irq 7 on isa0
ep0: Ethernet address 00:20:af:09:50:33
ep1: <3Com 3C509-TPO EtherLink III> at port 0x300-0x30f irq 5 on isa0
ep1: Ethernet address 00:a0:24:ea:8f:33
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, logging limited to 100 packets/entry by default
ad0: 9787MB <WDC WD102AA> [19885/16/63] at ata0-master using UDMA33
(null): MODE_SENSE_BIG - UNIT ATTENTION asc=29 ascq=00 error=04
acd0: CDROM <CD-ROM CDU55E> at ata1-master using PIO0
Mounting root from ufs:/dev/ad0s1a
ad0: UDMA ICRC READ ERROR blk# 225303 retrying
ad0: UDMA ICRC READ ERROR blk# 67727 retrying
ad0: UDMA ICRC READ ERROR blk# 205367 retrying
ad0: UDMA ICRC READ ERROR blk# 65823 retrying
ad0: UDMA ICRC READ ERROR blk# 65823 retrying
ad0: UDMA ICRC READ ERROR blk# 4991055 retrying
ad0: UDMA ICRC READ ERROR blk# 203071 retrying
ad0: UDMA ICRC READ ERROR blk# 4991103 retrying
ad0: UDMA ICRC READ ERROR blk# 5122159 retrying
ad0: UDMA ICRC READ ERROR blk# 133215 retrying
ad0: UDMA ICRC READ ERROR blk# 4663423 retrying
ad0: UDMA ICRC READ ERROR blk# 4727359 retrying
ad0: UDMA ICRC READ ERROR blk# 4727359 retrying
ad0: UDMA ICRC READ ERROR blk# 4727359 retrying
--
Close your eyes. Now forget what you see. What do you feel? --
My heart. -- Come here. -- Your heart. -- See? We're exactly the same.
Jon Smith -- Senior Math Major @ Purdue
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0004111944280.52908-100000>