Date: Wed, 3 Mar 1999 19:02:47 -0600 From: Bob Willcox <bob@luke.pmr.com> To: questions list <freebsd-questions@freebsd.org> Subject: snd: Unable to allocate 131072 bytes of buffer Message-ID: <19990303190246.A55284@luke.pmr.com>
next in thread | raw e-mail | index | archive | help
Since adding more memory to my system (256MB to 512MB) I am now getting
this error message at boot time for my sound blaster card. Anyone have
any idea on how to fix this?
Thanks,
Bob
P.S. My entire boot dmesg output is:
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-STABLE #5: Tue Mar 2 18:35:21 CST 1999
bob@luke.pmr.com:/usr/src/sys/compile/LUKE.mp
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping=2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>>
real memory = 536870912 (524288K bytes)
avail memory = 519704576 (507524K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xf02e8000.
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=8086 device=71a0)> rev 0x00 on pci0.0.0
chip1: <PCI to PCI bridge (vendor=8086 device=71a1)> rev 0x00 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.4.0
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.4.3
ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> rev 0x00 int a irq 17 on pci0.6.0
ahc0: aic7896/97 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> rev 0x00 int a irq 17 on pci0.6.1
ahc1: aic7896/97 Wide Channel B, SCSI Id=7, 16/255 SCBs
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x05 int a irq 19 on pci0.7.0
fxp0: Ethernet address 00:e0:18:b0:03:32
ncr0: <ncr 53c860 fast20 scsi> rev 0x02 int a irq 16 on pci0.12.0
Probing for devices on PCI bus 1:
vga0: <Matrox model 0521 graphics accelerator> rev 0x01 int a irq 16 on pci1.0.0
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
ppc0 at 0x378 irq 7 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppi0: <generic parallel i/o> on ppbus 0
lppps0: <Pulse per second Timing Interface> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 5 drq 1 on isa
snd0: <SoundBlaster 16 4.13>
sbxvi0 at drq 5 on isa
snd0: <SoundBlaster 16 4.13>
soundcard buffer alloc failed
snd: Unable to allocate 131072 bytes of buffer
sbmidi0 at 0x330 on isa
snd0: <SoundBlaster MPU-401>
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
Waiting 10 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
sa1 at ncr0 bus 0 target 3 lun 0
sa1: <ARCHIVE Python 00095-001 5.45> Removable Sequential Access SCSI-2 device
sa1: 7.812MB/s transfers (7.812MHz, offset 8)
sa0 at ncr0 bus 0 target 5 lun 0
sa0: <EXABYTE EXB-85058SQANXR1 07T0> Removable Sequential Access SCSI-2 device
sa0: 5.000MB/s transfers (5.000MHz, offset 8)
sa2 at ncr0 bus 0 target 6 lun 0
sa2: <WANGTEK 51000 SCSI RVM7 5F22> Removable Sequential Access SCSI-CCS device
sa2: 3.300MB/s transfers
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST39102LW 0005> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
changing root device to da0s1a
da3 at ncr0 bus 0 target 1 lun 0
da3: <IOMEGA ZIP 100 J.03> Removable Direct Access SCSI-2 device
da3: 3.300MB/s transfers
da3: 96MB (196608 512 byte sectors: 64H 32S/T 96C)
da4 at ncr0 bus 0 target 2 lun 0
da4: <iomega jaz 2GB E.17> Removable Direct Access SCSI-2 device
da4: 20.000MB/s transfers (20.000MHz, offset 8)
da4: 1911MB (3915600 512 byte sectors: 255H 63S/T 243C)
cd0 at ncr0 bus 0 target 4 lun 0
cd0: <TOSHIBA CD-ROM XM-6401TA 1009> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM DDRS-39130D DC1B> Fixed Direct Access SCSI-2 device
da1: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da1: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <IBM DDRS-39130D DC1B> Fixed Direct Access SCSI-2 device
da2: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da2: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)
--
Bob Willcox The man who follows the crowd will usually get no
bob@luke.pmr.com further than the crowd. The man who walks alone is
Austin, TX likely to find himself in places no one has ever
been. -- Alan Ashley-Pitt
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990303190246.A55284>