Date: Sun, 7 Nov 2021 14:42:15 +0100 From: Bernd Walter <ticso@cicely7.cicely.de> To: Brian Scott <bscott@bunyatech.com.au> Cc: arm@freebsd.org Subject: Re: DS3231 v. MAX77620 Message-ID: <YYfXt3g1hlTYOgf6@cicely7.cicely.de> In-Reply-To: <e8016921-4947-d237-c3c3-93f9ec12c78c@bunyatech.com.au> References: <e8016921-4947-d237-c3c3-93f9ec12c78c@bunyatech.com.au>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Nov 07, 2021 at 12:30:51PM +1100, Brian Scott wrote:
> Hi All,
>
> I just plugged a DS3231 (RTC) into a RPi4 running 13.0 Release. Not
> strictly necessary but I had one on my desk and it's a weekend. Added an
> appropriate dtb overlay and loaded the ds3231.ko via loader.conf. Done
> this a few times before on other boards and not expecting any drama.
>
> Instead of showing up during boot as a DS3231, it appears to be probed
> as a MAX77620 (which fails) and leaves the real device unavailable to
> the ds3231 driver.
>
>
> Nov 5 17:23:00 427269616e-60 kernel: iic0: <I2C generic I/O> on iicbus0
> Nov 5 17:23:00 427269616e-60 kernel: rtc0: <MAX77620 RTC> at addr 0xd0
> on iicbus0
>
> Nov 5 17:23:00 427269616e-60 kernel: rtc0: Error when reading reg 0x02,
> rv: 35
> Nov 5 17:23:00 427269616e-60 kernel: rtc0: Failed to configure RTC
> Nov 5 17:23:00 427269616e-60 kernel: device_attach: rtc0 attach returned 5
This is on a 13.0-RELEASE with a Pi3B:
iic0: <I2C generic I/O> on iicbus0
rtc0: <MAX77620 RTC> at addr 0xd0 on iicbus0
ugen1.1: <DWCOTG OTG Root HUB> at usbus1
uhub0 on usbus1
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
rtc0: registered as a time-of-day clock, resolution 1.000000s
With this overlay:
# cat /boot/dtb/overlays/rpi-DS3231.dts
/dts-v1/;
/plugin/;
&i2c1 {
status = "okay";
rtc: rtc@68 {
compatible = "maxim,ds3231";
reg = <0x68>;
};
};
Never consideered it wrong, since it worked and thought the hardware is
just compatible.
But obviously this is not the ds3231 driver in sys/dev/iicbus.
However, I also couldn't get the same DS3231 module running on my Pi4.
There is something else going on with the Pi4 beside the driver issue,
since the wrong drivers works with the hardware on a Pi3.
For me the RTC also was just a nice to have, not a requirement, so I hadn't
spend time into debugging it either.
>
> After some investigation I have found that all I need to provoke these
> messages is the dtb overlay loaded. Exactly the same messages are
> generated without the ds3231.ko module and even when no physical device
> is present.
>
> Looking at max77620_rtc_probe in
> sys/arm64/nvidia/tegra210/max77620_rtc.c shows:
>
> static int
> max77620_rtc_probe(device_t dev)
> {
> struct iicbus_ivar *dinfo;
> dinfo = device_get_ivars(dev);
> if (dinfo == NULL)
> return (ENXIO);
> if (dinfo->addr != MAX77620_RTC_I2C_ADDR << 1)
> return (ENXIO);
> device_set_desc(dev, "MAX77620 RTC");
> return (BUS_PROBE_DEFAULT);
> }
>
> This device will attempt to attach to anything with address ==
> MAX77620_RTC_I2C_ADDR (0x68) that is found in the device tree. However,
> https://learn.adafruit.com/i2c-addresses/the-list lists:
>
> 0x68 This address is really popular with real time clocks, almost all of
> them use 0x68! AMG8833 IR Thermal Camera Breakout (0x68 or 0x69) DS1307
> RTC (0x68 only) DS3231 RTC (0x68 only) ICM-20649 Accel+Gyro (0x68 or
> 0x69) ITG3200 Gyro (0x68 or 0x69) MPU-9250 9-DoF IMU (0x68 or 0x69)
> MPU-60X0 Accel+Gyro (0x68 or 0x69) PCF8523 RTC (0x68 only)
>
> A seven bit device address is clearly not enough to uniquely identify a
> type of device and so shouldn't be used like this in the driver.
>
> Either the driver should use ofw_bus_search_compatible (although I
> believe there is no entry for the rtc in the linux device tree) or at
> least made conditional on the parent device (the MAX77620) being in the
> device tree.
>
> As I said earlier, this doesn't matter a huge amount for me at this
> stage because in my current application time will be configured by ntp.
> In the future it will matter more. While it may well be that the target
> device cannot be identified any other way, this doesn't belong in GENERIC.
>
> Thanks for reading,
>
> Brian Scott
>
--
B.Walter <bernd@bwct.de> https://www.bwct.de
Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?YYfXt3g1hlTYOgf6>