From owner-freebsd-current Thu Sep 28 08:51:35 1995 Return-Path: owner-current Received: (from root@localhost) by freefall.freebsd.org (8.6.12/8.6.6) id IAA18404 for current-outgoing; Thu, 28 Sep 1995 08:51:35 -0700 Received: from miller.cs.uwm.edu (miller.cs.uwm.edu [129.89.35.13]) by freefall.freebsd.org (8.6.12/8.6.6) with ESMTP id IAA18399 for ; Thu, 28 Sep 1995 08:51:30 -0700 Received: (from james@localhost) by miller.cs.uwm.edu (8.6.10/8.6.10) id KAA29154 for current@freebsd.org; Thu, 28 Sep 1995 10:51:27 -0500 Date: Thu, 28 Sep 1995 10:51:27 -0500 From: Jim Lowe Message-Id: <199509281551.KAA29154@miller.cs.uwm.edu> To: current@freebsd.org Subject: Pci bus timing problems Sender: owner-current@freebsd.org Precedence: bulk A little more detail. I changed i386/isa/pcibus.c to version 1.14 with the CONF1_ENABLE_CHK set to 0x80000000ul and my video capture card is working again in 640x480 mode. The main board I am running is a SuperMicro P55CW, Triton chip set. The PCI details are as follows: FreeBSD 2.2-CURRENT #9: Thu Sep 28 10:43:26 CDT 1995 james@miller-genuine-draft.cs.uwm.edu:/usr/src/sys/compile/MGD CPU: 99-MHz Pentium 735\\90 or 815\\100 (Pentium-class CPU) Origin = "GenuineIntel" Id = 0x525 Stepping=5 Features=0x1bf Probing for devices on the PCI bus: chip0 rev 1 on pci0:0 chip1 rev 2 on pci0:7 vga0 rev 0 on pci0:17 meteor0 rev 0 int a irq 10 on pci0:18 ahc0 rev 0 int a irq 11 on pci0:19 ahc0: 2940 Wide Channel, SCSI Id=7, aic7870, 16 SCBs (ahc0:0:0): "HP C2247-300 0BH4" type 0 fixed SCSI 2 sd0(ahc0:0:0): Direct-Access 1003MB (2054864 512 byte sectors) (ahc0:2:0): "TOSHIBA CD-ROM XM-3401TA 2873" type 5 removable SCSI 2 cd0(ahc0:2:0): CD-ROM cd0(ahc0:2:0): NOT READY asc:4,1 cd0(ahc0:2:0): Logical unit is in process of becoming ready can't get the size de0 rev 17 int a irq 10 on pci0:20 de0: DC21140 [10-100Mb/s] pass 1.1 Ethernet address 00:00:c0:b3:d0:9a de0: enabling 10baseT UTP port ------- -Jim