Date: Wed, 08 Dec 1999 14:13:56 -0600 From: "Jonathan E. Lyons" <parrothd@midwest.net> To: stephen <serenity@tcainternet.com>, questions@FreeBSD.ORG Subject: Re: its droping like flies Message-ID: <3.0.5.32.19991208141356.00f82dc0@midwest.net> In-Reply-To: <3.0.6.32.19991208133559.0090d980@pop.tcainternet.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Maybe natd -dynamic -interface rl0 -log Not that it should matter... At 01:35 PM 12/8/99 -0600, stephen wrote: >i just fdisked the entire thing and started all over from scratch... >i am only running natd >i log into a dhcp to obtain my address >and randomly within the second hour natd stops, and i have to restart it... >what am i doing wrong ??? >i have a p90 32 megs of ram >realteck 10/100 conected to cox cable modem >nec2000 10 bnc connectig my win95 and win nt puters >and i am the gateway using 3.3 stable > >here is my configurations: >----- rc.conf ----- >network_interfaces="rl0 auto ed1 ed0" >ifconfig_rl0="inet 192.168.1.1 netmask 255.255.255.0" >ifconfig_ed0="inet 192.168.2.1 netmask 255.255.255.0" >ifconfig_ed1="inet 192.168.3.1 netmaks 255.255.255.0" >linux_enable="YES" >moused_port="/dev/psm0" >moused_enable="YES" >saver="logo" >gateway_enable="YES" >nfs_server_enable="NO" >firewall_enable="YES" >dhclient rl0 >natd -interface rl0 -dynamic -log >---- rc.firewall ---- >/sbin/ipfw -f flush >/sbin/ipfw add divert natd all from any to any via rl0 >/sbin/ipfw add pass all from any to any >---- ifconfig -a output ----- >rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > inet 208.180.57.228 netmask 0xffffff00 broadcast 208.180.57.255 > ether 00:00:e8:81:32:d3 > media: autoselect > supported media: autoselect 100baseTX <full-duplex> 100baseTX ><half-dupl >ex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP 10baseT/UTP <half-duplex> >ed0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255 > ether 00:00:b4:36:25:6c >lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 >tun0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 >sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552 >ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 >lo0: flags=8008<LOOPBACK,MULTICAST> mtu 16384 > >any sugestions ??? > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > > Jonathan E. Lyons parrothd@midwest.net Nucleus Consulting ICQ # 14226912 www.nucleusconsulting.com Cell # 773-251-1967 A+, MCSE, CCNA, FreeBSD! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.5.32.19991208141356.00f82dc0>