Date: Tue, 8 Apr 2003 15:18:43 -0500 (CDT) From: Blake Freeburg <blakef@votris.mrdata.com> To: freebsd-questions@freebsd.org Subject: Page fault while in kernel mode (FreeBSD 4.6.2) Message-ID: <200304082018.h38KIhFV014090@votris.mrdata.com>
next in thread | raw e-mail | index | archive | help
Hello,
Recently a server of mine has been rembooting quite often... I thought it may have been related to a UDMA 33 and UDMA 133 drive on the same chain, so I replaced them. But it continues to persist, especially when doing disk intensive work.
For instance, just today, I see this...
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x56
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc020ecd4
stack pointer = 0x10:0xd7dbebb4
frame pointer = 0x10:0xd7dbebd8
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 49894 (analog)
interrupt mask = bio
trap number = 12
panic: page fault
syncing disks... 30 12 9 9 2 2 2 2 2 2 2 14 2 2 2 2 2 2 2 5 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
giving up on 1 buffers
Uptime: 8h28m37s
and
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0xbfca0334
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc0350b0b
stack pointer = 0x10:0xd7d43ed0
frame pointer = 0x10:0xd7d43ee0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 95728 (awk)
interrupt mask = net tty bio cam
trap number = 12
panic: page fault
syncing disks... 50 6 2 2 2 2 2 2 2 10 1 1 1 1 1 1 1 3
done
Uptime: 3h9m17s
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6.2-RELEASE #0: Wed Aug 14 21:23:26 GMT 2002
murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (863.87-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 535560192 (523008K bytes)
avail memory = 516165632 (504068K bytes)
Preloaded elf kernel "kernel" at 0xc04d0000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 12 entries at 0xc00f2be0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Intel model 1132 VGA-compatible display device> at 2.0 irq 11
pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
fxp0: <Intel Pro/100 Ethernet> port 0xde80-0xdebf mem 0xff8ef000-0xff8effff irq 11 at device 8.0 on pci1
fxp0: Ethernet address 00:d0:b7:e2:47:d4
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xdf00-0xdf3f irq 9 at device 12.0 on pci1
xl0: Ethernet address: 00:60:97:26:50:83
miibus1: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xffa0-0xffaf at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef40-0xef5f irq 11 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 9
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xef80-0xef9f irq 10 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2445) at 31.5 irq 9
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcd7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 39083MB <Maxtor 34098H4> [79408/16/63] at ata0-master UDMA100
ad2: 10991MB <Maxtor 91152D8> [22332/16/63] at ata1-master UDMA33
ad3: 19541MB <Maxtor 52049H4> [39703/16/63] at ata1-slave UDMA100
acd0: CD-RW <SONY CD-RW CRX140E> at ata0-slave PIO4
Note: the ad2 drive is not mounted, but just 'installed' - making sure the content copied correctly.
Sincerely,
Blake Freeburg
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200304082018.h38KIhFV014090>