From owner-freebsd-scsi Thu Jul 1 11:48:19 1999 Delivered-To: freebsd-scsi@freebsd.org Received: from aurora.sol.net (aurora.sol.net [206.55.65.76]) by hub.freebsd.org (Postfix) with ESMTP id 31EBE15035 for ; Thu, 1 Jul 1999 11:48:05 -0700 (PDT) (envelope-from jgreco@aurora.sol.net) Received: (from jgreco@localhost) by aurora.sol.net (8.9.2/8.9.2/SNNS-1.02) id NAA85021; Thu, 1 Jul 1999 13:48:00 -0500 (CDT) From: Joe Greco Message-Id: <199907011848.NAA85021@aurora.sol.net> Subject: Re: FreeBSD panics with Mylex DAC960SX In-Reply-To: <199907010410.WAA39523@panzer.kdm.org> from "Kenneth D. Merry" at "Jun 30, 1999 10:10:43 pm" To: ken@plutotech.com (Kenneth D. Merry) Date: Thu, 1 Jul 1999 13:47:59 -0500 (CDT) Cc: scsi@freebsd.org X-Mailer: ELM [version 2.4ME+ PL43 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > There are several questions I have, which I hope can be answered with some > diagnostic patches I've appended. >=20 > 1. Why does the da1 announcement just print 'A' and not the rest of the > line? >=20 > 2. Why does the camcontrol read capacity output indicate that the Mylex > array is not ready, yet an open immediately after that seems to pass > the read capacity by just fine? If you're talking about when I do the camcontrol after waiting a bit - it is because the Mylex has completed its startup routine. Remember, all of this is only happening when the Mylex has not yet finished its startup procedure, which can happen in the events: 1) Things are OK but it just isn't done yet. This is a rare case, the system just boots too slow with the RAM test and the 15-second boot prompt. If I ESC the RAM test and hit return to boot right away, from a cold power on, then I can get the crash. 2) Things are not OK; i.e. the RAID is damaged or offline. This is the case where I actually first noticed the behaviour. > 3. Assuming the read capacity is returned without an error, why does the > Mylex return a bogus sector size at least? (indicated by your > diagnostic output from the slice code above) >=20 > Hopefully I can at least get a clue to the answers for 1 and 2 with the > patches appended. >=20 > So, Joe, could you: >=20 > - apply Bruce's patch (so you won't panic), or just keep the one you've g= ot Kept mine. > - apply the attached patch to scsi_da.c Done. > - boot with -v (boot kernel -v at the loader prompt) > - send the output from the boot Whoa... okay. Well, I just modified the kernel. The same things apply that were being done; i.e. .profile does a camcontrol and then tries to do a fsck -p. Lots of output. I'm including it all since I don't know what is really significant. ~~ Hit [Enter] to boot immediately, or any other key for command prompt. =0DBooting [kernel] in 14 seconds...=20 Type '?' for a list of commands, 'help' for more detailed help. disk1s1a:> boot -s -v=08 =08=08 =08=08 =08=08 =08v -s /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08/kernel = text=3D0x10e9fc |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08dat= a=3D0x16124+0x1de98 |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08syms=3D= [0x4+0x1de20|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08+0x= 4+0x20077\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08] Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.1-RELEASE #4: Thu Jul 1 13:29:19 CDT 1999 root@spool0.newsops.execpc.com:/usr/src/sys/compile/SPOOL-DDB Calibrating clock(s) ... TSC clock: 400900364 Hz, i8254 clock: 1193156 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium II/Xeon/Celeron (686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x652 Stepping=3D2 Features=3D0x183fbff> real memory =3D 536870912 (524288K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00293000 - 0x1ffdffff, 534040576 bytes (130381 pages) avail memory =3D 519999488 (507812K bytes) Programming 24 pins in IOAPIC #0 SMP: CPU0 apic_initialize(): lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Found BIOS32 Service Directory header at 0xf00f9d20 Entry =3D 0xf0530 (0xf00f0530) Rev =3D 0 Len =3D 1 PCI BIOS entry at 0x730 DMI header at 0xf00f59c0 Version 2.0 Table at 0xf59da, 32 entries, 1050 bytes Other BIOS signatures found: ACPI: 00000000 $PnP: 000fd150 Preloaded elf kernel "kernel" at 0xf0283000. Math emulator present SMP: CPU0 bsp_apic_configure(): lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D71908086) Probing for devices on PCI bus 0: found-> vendor=3D0x8086, dev=3D0x7190, revid=3D0x03 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 map[0]: type 3, range 32, base e4000000, size 26 chip0: rev 0x03 on pci0.0.0 found-> vendor=3D0x8086, dev=3D0x7191, revid=3D0x03 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 subordinatebus=3D1 secondarybus=3D1 chip1: rev 0x03 on pci0.1.0 found-> vendor=3D0x8086, dev=3D0x7110, revid=3D0x02 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 subordinatebus=3D0 secondarybus=3D0 chip2: rev 0x02 on pci0.4.0 found-> vendor=3D0x8086, dev=3D0x7111, revid=3D0x01 class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 map[0]: type 4, range 32, base 0000d800, size 4 Freeing (NOT implemented) redirected ISA irq 10. found-> vendor=3D0x8086, dev=3D0x7112, revid=3D0x01 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Dd, irq=3D19 map[0]: type 4, range 32, base 0000d400, size 5 found-> vendor=3D0x8086, dev=3D0x7113, revid=3D0x02 class=3D06-80-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 chip3: rev 0x02 on pci0.4.3 Freeing (NOT implemented) redirected ISA irq 10. found-> vendor=3D0x9005, dev=3D0x001f, revid=3D0x00 class=3D01-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Da, irq=3D19 map[0]: type 4, range 32, base 0000d000, size 8 map[1]: type 1, range 64, base e3000000, size 12 map[2]: type 0, range 0, base 00000000, size 0 ahc0: rev 0x00 int a irq 19 on pci= 0.6.0 ahc0: Reading SEEPROM...done. ahc0: BIOS eeprom is present ahc0: Secondary High byte termination Enabled ahc0: Secondary Low byte termination Enabled ahc0: Primary Low Byte termination Enabled ahc0: Primary High Byte termination Enabled ahc0: aic7890/91 Wide Channel A, SCSI Id=3D7, 16/255 SCBs ahc0: Downloading Sequencer Program... 392 instructions downloaded found-> vendor=3D0x1011, dev=3D0x0024, revid=3D0x03 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 subordinatebus=3D2 secondarybus=3D2 chip4: rev 0x03 on pci0.1= 0.0 Probing for devices on PCI bus 1: Probing for devices on PCI bus 2: Freeing (NOT implemented) redirected ISA irq 11. found-> vendor=3D0x1011, dev=3D0x0009, revid=3D0x22 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Da, irq=3D18 map[0]: type 4, range 32, base 0000b800, size 7 map[1]: type 1, range 32, base e2800000, size 7 de0: rev 0x22 int a irq 18 on pci2.4.0 de0: SMC 9332BDT 21140A [10-100Mb/s] pass 2.2 de0: address 00:e0:29:2b:e1:08 bpf: de0 attached Freeing (NOT implemented) redirected ISA irq 10. found-> vendor=3D0x1011, dev=3D0x0009, revid=3D0x22 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Da, irq=3D19 map[0]: type 4, range 32, base 0000b400, size 7 map[1]: type 1, range 32, base e2000000, size 7 de1: rev 0x22 int a irq 19 on pci2.5.0 using shared irq19. de1: SMC 9332BDT 21140A [10-100Mb/s] pass 2.2 de1: address 00:e0:29:2b:e1:09 bpf: de1 attached Probing for devices on the ISA bus: atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa sc0 on isa sc0: fb0 kbd0 sc0: VGA color <16 virtual consoles, flags=3D0x0> ed0 not found at 0x280 atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa kbd0: atkbd0, AT 101/102 (2), config:0x10000, flags:0x3d0000 psm0: current command byte:0067 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. psm0 not found sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A, console sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2: configured irq 5 not in bitmap of probed irqs 0 sio2: irq maps: 0x1 0x1 0x1 0x1 sio2: probe failed test(s): 0 1 2 4 6 7 9 sio2 not found at 0x3e8 sio3: configured irq 9 not in bitmap of probed irqs 0 sio3: irq maps: 0x1 0x1 0x1 0x1 sio3: probe failed test(s): 0 1 2 4 6 7 9 sio3 not found at 0x2e8 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in ppc: parallel port found at 0x378 ppc0: ECP SPP ECP+EPP SPP ppc0 at 0x378 irq 7 on isa ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold nlpt0: on ppbus 0 nlpt0: Interrupt-driven port ppi0: on ppbus 0 plip: irq 7 plip0: on ppbus 0 bpf: lp0 attached vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xf00b8000 size:32k gran:32k, buf:0x0 size:0k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81=20 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96=20 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 npx0 on motherboard npx0: INT 16 interface apm0: disabled, not probed. we0 at 0x2e8 on isa we0: kernel is keeping watchdog alive imasks: bio c8000040, tty c70c009a, net c70c009a SMP: enabled INTs: 1, 3, 4, 6, 7, 18, 19, apic_imen: 0x00f3ff25 BIOS Geometries: 0:00000000 0..0=3D1 cylinders, 0..0=3D1 heads, 1..0=3D0 sectors 1:00000000 0..0=3D1 cylinders, 0..0=3D1 heads, 1..0=3D0 sectors 2:00000000 0..0=3D1 cylinders, 0..0=3D1 heads, 1..0=3D0 sectors 3:00000000 0..0=3D1 cylinders, 0..0=3D1 heads, 1..0=3D0 sectors 4:00000000 0..0=3D1 cylinders, 0..0=3D1 heads, 1..0=3D0 sectors 5:00000000 0..0=3D1 cylinders, 0..0=3D1 heads, 1..0=3D0 sectors 6:00000000 0..0=3D1 cylinders, 0..0=3D1 heads, 1..0=3D0 sectors 7:00000000 0..0=3D1 cylinders, 0..0=3D1 heads, 1..0=3D0 sectors 0 accounted for Device configuration finished. APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via pin 2 IP packet filtering initialized, divert disabled, rule-based forwarding dis= abled, logging limited to 100 packets/entry bpf: tun0 attached bpf: sl0 attached bpf: ppp0 attached new masks: bio c8000040, tty c70c009a, net c70c009a bpf: lo0 attached Waiting 2 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. SMP: AP CPU #1 Launched! SMP: CPU1 apic_initialize(): lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff de1: enabling 100baseTX port ahc0: Selection Timeout on A:2. 1 SCBs aborted ahc0: Selection Timeout on A:3. 1 SCBs aborted ahc0: Selection Timeout on A:4. 1 SCBs aborted ahc0: Selection Timeout on A:5. 1 SCBs aborted ahc0: Selection Timeout on A:6. 1 SCBs aborted ahc0: Selection Timeout on A:8. 1 SCBs aborted ahc0: Selection Timeout on A:9. 1 SCBs aborted ahc0: Selection Timeout on A:10. 1 SCBs aborted ahc0: Selection Timeout on A:11. 1 SCBs aborted ahc0: Selection Timeout on A:12. 1 SCBs aborted ahc0: Selection Timeout on A:13. 1 SCBs aborted ahc0: Selection Timeout on A:14. 1 SCBs aborted ahc0: Selection Timeout on A:15. 1 SCBs aborted (probe1:ahc0:0:1:0): MODE SENSE(06). CDB: 1a 0 a 0 14 0=20 (probe1:ahc0:0:1:0): NOT READY (probe1:ahc0:0:1:0): INQUIRY. CDB: 12 1 80 0 ff 0=20 (probe1:ahc0:0:1:0): ILLEGAL REQUEST asc:24,0 (probe1:ahc0:0:1:0): Invalid field in CDB ahc0: target 0 using 16bit transfers ahc0: target 0 synchronous at 20.0MHz, offset =3D 0xf ahc0: target 1 using 16bit transfers ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10 ahc0: target 1 using asynchronous transfers ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10 pass0 at ahc0 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-2 device=20 pass0: Serial Number HD0439370E0ZET pass0: 40.0MB/s transfers (20.0MHz, offset 15, 16bit), Tagged Queueing Enab= led pass1 at ahc0 bus 0 target 1 lun 0 pass1: Fixed Direct Access SCSI-2 device=20 pass1: 40.0MB/s transfers (20.0MHz, offset 16, 16bit), Tagged Queueing Enab= led Considahc0: target 1 using asynchronous transfers ering FFS ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10 ro(da0:ahc0:0:0:0): about to print announcement da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device=20 da0: Serial Number HD0439370E0ZET da0: 40.0MB/s transfers (20.0MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 4148MB (8496884 512 byte sectors: 255H 63S/T 528C) (da0:ahc0:0:0:0): printed announcement ot f/s. ahc0: target 1 using asynchronous transfers changingahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10 root device toahc0: target 1 using asynchronous transfers da0s1a ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10 ahc0: target 1 using asynchronous transfers ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10 ahc0: target 1 using asynchronous transfers ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10 (da1:ahc0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da1:ahc0:0:1:0): NOT READY (da1:ahc0:0:1:0): about to print announcement da1 at ahc0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-2 device=20 da1: 40.0MB/s transfers (20.0MHz, offset 16, 16bit), Tagged Queueing Enabled da1: A (da1:ahc0:0:1:0): printed announcement (da0:ahc0:0:0:0): read capacity returned 0 (da0:ahc0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da0:ahc0:0:0:0): NOT READY (da0:ahc0:0:0:0): address =3D 8496883, length =3D 512 da0s1: type 0xa5, start 63, end =3D 8482319, size 8482257 : OK Enter full pathname of shell or RETURN for /bin/sh: de0: autosense failed: = cable problem? erase ^H, kill ^U, intr ^C /sbin/camcontrol cmd -n da -u 1 -v -c 25 0 0 0 0 0 0 0 0 0 -i 8 i4 i4 ahc0: target 1 using asynchronous transfers ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10 camcontrol: error sending command (pass1:ahc0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (pass1:ahc0:0:1:0(): NOT READY endd of camcontrol=0Da 0:ahc0:0:0:0): read capacity returned 0 (da0:ahc0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da0:ahc0:0:0:0): NOT READY (da0:ahc0:0:0:0): address =3D 8496883, length =3D 512 (da0:ahc0:0:0:0): read capacity returned 0 (da0:ahc0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da0:ahc0:0:0:0): NOT READY (da0:ahc0:0:0:0): address =3D 8496883, length =3D 512 /dev/rda0s1a: FILESYSTEM CLEpp=00=00/dev/rda0s1=00=00=00=0Cp=0C=00=008=0C= =00=1F|=00=07=00=00=00=03=00=00v=00=00: 1 using asynchronous transfers ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10 (da0:ahc0:ahc0: target 1 using asynchronous transfers 0:0:0): reahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10 ad capacity returned 0 (da0:ahc0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da0:ahc0:0:0:0): NOT READY (da0:ahc0:0:0:0): address =3D 8496883, length =3D 512 (da1:ahc0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da1:ahc0:0:1:0): NOT READY (da1:ahc0:0:1:0): read capacity returned 0 (da1:ahc0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da1:ahc0:0:1:0): NOT READY (da1:ahc0:0:1:0): address =3D -523733007, length =3D 512 (da0:ahc0:0:0:0): read capacity returned 0 (da0:ahc0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da0:ahc0:0:0:0): NOT READY (da0:ahc0:0:0:0): address =3D 8496883, length =3D 512 /dev/rda0s1h: (FILESYSTEM CLEANd; SKIPPING CHECKaS /dev/rda0s1h: 0clean, 232315 fr:ee (131 frags, 2a9023 blocks, 0.1h% fragmen= tation)c 0:0:0:0): read capacity returned 0 (da0:ahc0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da0:ahc0:0:0:0): NOT READY (da0:ahc0:0:0:0): address =3D 8496883, length =3D 512 (da0:ahc0:0:0:0): read capacity returned 0 (da0:ahc0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da0:ahc0:0:0:0): NOT READY (da0:ahc0:0:0:0): address =3D 8496883, length =3D 512 /dev/rda0s1e: (FILESYSTEM CLEANd; SKIPPING CHECKaS /dev/rda0s1e: 0clean, 51019 fre:e (8139 frags, 5a360 blocks, 4.1%h fragment= ation)=0Dc 0:0:0:0): read capacity returned 0 (da0:ahc0:0:0:0): READ CAPACITY. CDB: ahc0: target 1 using asynchronous tra= nsfers 25 0 0 0 0ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10 0 0 0 0 0=20 (da0:ahc0:0:0:0): NOT READY (da0:ahc0:0:0:0): address =3D 8496883, length =3D 512 (da0:ahc0:0:0:0): read capacity returned 0 (da0:ahc0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da0:ahc0:0:0:0): NOT READY (da0:ahc0:0:0:0): address =3D 8496883, length =3D 512 /dev/rda0s1f: (FILESYSTEM CLEANd; SKIPPING CHECKaS 0/dev/rda0s1f: :clean, 112455 fraee (239 frags, 1h4027 blocks, 0.2c% fragme= ntation)0 :0:0:0): read capacity returned 0 (da0:ahc0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da0:ahc0:0:0:0): NOT READY (da0:ahc0:0:0:0): address =3D 8496883, length =3D 512 (da0:ahc0:0:0:0): read capacity returned 0 (da0:ahc0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da0:ahc0:0:0:0): NOT READY (da0:ahc0:0:0:0): address =3D 8496883, length =3D 512 /dev/rda0s1g: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/rda0s1g: clean, 1308409 free (313 frags, 163512 blocks, 0.0% fragmenta= ti|=00c0:get 1 using asynchronous transfers ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10 ahc0: target 1 using asynchronous transfers ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10 ahc0: target 1 using asynchronous transfers ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10 ahc0: target 1 using asynchronous transfers ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10 (da1:ahc0:0:1:0): READ(06). CDB: 8 0 0 0 1 0=20 (da1:ahc0:0:1:0): NOT READY da1: error reading primary partition table reading fsbn 0 Can't open /dev/rda1s1e: Input/output error /dev/rda1s1e: CAN'T CHECK FILE SYSTEM. /dev/rda1s1e: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. THE FOLLOWING FILE SYSTEM HAD AN UNEXPECTED INCONSISTENCY: /dev/rda1s1e (/news) #=20 That's it. Let me know if you need more. ... Joe ---------------------------------------------------------------------------= ---- Joe Greco - Systems Administrator jgreco@ns.sol.net Solaria Public Access UNIX - Milwaukee, WI 414/342-4847 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message