Date: 05 Apr 2003 21:01:56 -0500 From: Joe Marcus Clarke <marcus@marcuscom.com> To: Joe Mom <compuman00@hotmail.com> Cc: freebsd-gnome@freebsd.org Subject: RE: FileRoller Install stops Message-ID: <1049594516.60201.74.camel@shumai.marcuscom.com> In-Reply-To: <F354F3AE49794B479624CEF28085247F08917D@romeo.gtn.ca> References: <F354F3AE49794B479624CEF28085247F08917D@romeo.gtn.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-MiuCuJ5fXeKlHW4MH0NI Content-Type: text/plain Content-Transfer-Encoding: quoted-printable On Sat, 2003-04-05 at 20:13, Joe Mom wrote: > Here is what I get while trying to install from the ports tree. You should run portupgrade -rf pkgconfig. This will force a rebuild of all GNOME bits. That should clear up these errors. Joe >=20 >=20 > /usr/libexec/elf/ld: warning: libgnomecanvas-2.so.0, needed by > /usr/X11R6/lib/libgnomeui-2.so, may conflict with > libgnomecanvas-2.so.200 > /usr/libexec/elf/ld: warning: libpangoft2-1.0.so.0, needed by > /usr/X11R6/lib/libbonoboui-2.so, may conflict with > libpangoft2-1.0.so.200 > /usr/libexec/elf/ld: warning: libgthread-2.0.so.0, needed by > /usr/X11R6/lib/libbonoboui-2.so, may conflict with libgthread-2.0.so.200 > /usr/libexec/elf/ld: warning: libgtk-x11-2.0.so.0, needed by > /usr/X11R6/lib/libbonoboui-2.so, may conflict with libgtk-x11-2.0.so.200 > /usr/libexec/elf/ld: warning: libgdk-x11-2.0.so.0, needed by > /usr/X11R6/lib/libbonoboui-2.so, may conflict with libgdk-x11-2.0.so.200 > /usr/libexec/elf/ld: warning: libatk-1.0.so.0, needed by > /usr/X11R6/lib/libbonoboui-2.so, may conflict with libatk-1.0.so.200 > /usr/libexec/elf/ld: warning: libgdk_pixbuf-2.0.so.0, needed by > /usr/X11R6/lib/libbonoboui-2.so, may conflict with > libgdk_pixbuf-2.0.so.200 > /usr/libexec/elf/ld: warning: libpangoxft-1.0.so.0, needed by > /usr/X11R6/lib/libbonoboui-2.so, may conflict with > libpangoxft-1.0.so.200 > /usr/libexec/elf/ld: warning: libXft.so.1, needed by > /usr/X11R6/lib/libbonoboui-2.so, may conflict with libXft.so.2 > /usr/libexec/elf/ld: warning: libpangox-1.0.so.0, needed by > /usr/X11R6/lib/libbonoboui-2.so, may conflict with libpangox-1.0.so.200 > /usr/libexec/elf/ld: warning: libpango-1.0.so.0, needed by > /usr/X11R6/lib/libbonoboui-2.so, may conflict with libpango-1.0.so.200 > /usr/libexec/elf/ld: warning: libgobject-2.0.so.0, needed by > /usr/X11R6/lib/libbonoboui-2.so, may conflict with libgobject-2.0.so.200 > /usr/libexec/elf/ld: warning: libgmodule-2.0.so.0, needed by > /usr/X11R6/lib/libbonoboui-2.so, may conflict with libgmodule-2.0.so.200 > /usr/libexec/elf/ld: warning: libglib-2.0.so.0, needed by > /usr/X11R6/lib/libbonoboui-2.so, may conflict with libglib-2.0.so.200 > ../src/recent-files/librecent.a(egg-recent-model.o): In function > `egg_recent_model_update_item': > egg-recent-model.o(.text+0x1fc): undefined reference to > `gnome_vfs_uris_match' > ../src/recent-files/librecent.a(egg-recent-model.o): In function > `egg_recent_model_filter': > egg-recent-model.o(.text+0x7e1): undefined reference to > `gnome_vfs_get_uri_scheme' > ../src/recent-files/librecent.a(egg-recent-item.o): In function > `egg_recent_item_set_uri': > egg-recent-item.o(.text+0x17f): undefined reference to > `gnome_vfs_make_uri_from_input' > egg-recent-item.o(.text+0x1e1): undefined reference to > `gnome_vfs_make_uri_from_input' > ../src/recent-files/librecent.a(egg-recent-item.o): In function > `egg_recent_item_get_uri_for_display': > egg-recent-item.o(.text+0x253): undefined reference to > `gnome_vfs_format_uri_for_display' > gmake[4]: *** [file-roller] Error 1 > gmake[4]: Leaving directory > `/usr/ports/archivers/fileroller/work/file-roller-2.2.3/src' > gmake[3]: *** [all-recursive] Error 1 > gmake[3]: Leaving directory > `/usr/ports/archivers/fileroller/work/file-roller-2.2.3/src' > gmake[2]: *** [all] Error 2 > gmake[2]: Leaving directory > `/usr/ports/archivers/fileroller/work/file-roller-2.2.3/src' > gmake[1]: *** [all-recursive] Error 1 > gmake[1]: Leaving directory > `/usr/ports/archivers/fileroller/work/file-roller-2.2.3' > gmake: *** [all] Error 2 > *** Error code 2 >=20 > Stop in /usr/ports/archivers/fileroller. >=20 >=20 > ----------------------- > Joe Mom > "Drain us of life and cleanse the mess" > MuDvAyNe > ----------------------- >=20 > -----Original Message----- > From: Joe Marcus Clarke [mailto:marcus@marcuscom.com]=20 > Sent: Saturday, April 05, 2003 8:03 PM > To: Joe Mom > Cc: 'Mezz bsdforums.org'; freebsd-gnome@freebsd.org > Subject: RE: FileRoller Install stops >=20 > On Sat, 2003-04-05 at 20:01, Joe Mom wrote: > > First off : > >=20 > > Why don't you use the ports tree? To compile/install on your own hand > > without use ports tree, you need to use 'gmake' instead 'make'. > >=20 > > I tried compiling from ports tree with worse errors. This is why I > > turned to manual compiling. >=20 > What errors did you get when doing the port install? >=20 > Joe >=20 > >=20 > > During the install it switches to gmake automagically. :) > >=20 > > I need this program for gnome 2.2 to finish its install. > >=20 > > ----------------------- > > Joe Mom > > "Drain us of life and cleanse the mess" > > MuDvAyNe > > ----------------------- > >=20 > > -----Original Message----- > > From: Mezz bsdforums.org [mailto:reigncracks@hotmail.com]=20 > > Sent: Saturday, April 05, 2003 7:48 PM > > To: compuman00@hotmail.com > > Cc: freebsd-gnome@freebsd.org > > Subject: Re: FileRoller Install stops > >=20 > > >Hi, > > > > > >I am wondering if anyone has heard of this before or if you might > have > > >any ideas for me. > > > > > >I am trying to install file roller 2.2.3 (for gnome 2.2) and after I > > do: > > > > > ># ./configure > > ># make install clean > >=20 > > Why don't you use the ports tree? To compile/install on your own hand > > without use ports tree, you need to use 'gmake' instead 'make'. > >=20 > > >The install seems to hang for ever about 1 minute into the install. > > > > > >Here is the last line I see ... > > > > > >"echo "#include \"fr-marshal.h\"" > fr-marshal.c && > > >/usr/local/bin/glib-genmarshal --body --prefix=3Dfr_marshal >> > > >fr-marshal.c" > >=20 > > --prefix=3Dfr_marshal ??? Is it such of directory in your system? > >=20 > > Cheers, > > Mezz > >=20 > > >and it never goes any further. > > > > > >I have attempted to install 2.1.5 as well with the same results. > > > > > >I can't seem to find any documentation online, otherwise I wouldn't > bug > > >you guys. > > > > > > > > >----------------------- > > >Joe Mom > > > "Drain us of life and cleanse the mess" > > > MuDvAyNe > > >----------------------- > >=20 > > _______________________________________________ > > freebsd-gnome@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-gnome > > To unsubscribe, send any mail to > "freebsd-gnome-unsubscribe@freebsd.org" --=20 PGP Key : http://www.marcuscom.com/pgp.asc --=-MiuCuJ5fXeKlHW4MH0NI Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (FreeBSD) iD8DBQA+j4qUb2iPiv4Uz4cRAm2xAJ9X6I9epIrUPMPp0WF/xmGaaio7LACePP5d L/289ip/8j8mUmb1BzPCxA8= =GSFA -----END PGP SIGNATURE----- --=-MiuCuJ5fXeKlHW4MH0NI--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1049594516.60201.74.camel>