Date: Fri, 08 Aug 2003 10:38:37 +0800 From: HongChye Tan <hctan@active-venture.com> To: freebsd-scsi@freebsd.org Subject: Re: dmesg with Adaptec 2120S Message-ID: <5.2.1.1.0.20030808103808.00a16110@mail.active-venture.com>
next in thread | raw e-mail | index | archive | help
Hi, I just installed a Adaptec 2120S card on Intel SE7501WV2 since the hostraid is not supported. I configured the RAID 1 using 2 Maxtor Drives and managed to install FreeBSD 5.1. It is running and i managed to reboot the server. However, I got the message below from dmesg, appreciate if you could give me some advise. aac0: <Adaptec SCSI RAID 2120S> mem 0xf8000000-0xfbffffff irq 9 at device 9.0 on pci3 aac0: i960RX 100MHz, 48MB cache memory, optional battery present aac0: Kernel 4.0-0, Build 6003, S/N b81f0f aac0: Supported Options=1f7e<CLUSTERS,WCACHE,DATA64,HOSTTIME,RAID50,WINDOW4GB,SOFTERR,NORECOND,SGMAP64,ALARM,NONDASD> aacp0: <SCSI Passthrough Bus> on aac0 . . . aacd0: <RAID 1 (Mirror)> on aac0 aacd0: 35073MB (71831040 sectors) (probe6:aacp0:0:6:0): Vendor Specific Command. CDB: 12 1 80 0 ff 0 (probe6:aacp0:0:6:0): ILLEGAL REQUEST asc:24,0 (probe6:aacp0:0:6:0): Invalid field in CDB (probe6:aacp0:0:6:0): Vendor Specific Command. CDB: 12 1 80 0 ff 0 (probe6:aacp0:0:6:0): ILLEGAL REQUEST asc:24,0 (probe6:aacp0:0:6:0): Invalid field in CDB (probe6:aacp0:0:6:0): Vendor Specific Command. CDB: 12 1 80 0 ff 0 (probe6:aacp0:0:6:0): ILLEGAL REQUEST asc:24,0 (probe6:aacp0:0:6:0): Invalid field in CDB (probe6:aacp0:0:6:0): Vendor Specific Command. CDB: 12 1 80 0 ff 0 (probe6:aacp0:0:6:0): ILLEGAL REQUEST asc:24,0 (probe6:aacp0:0:6:0): Invalid field in CDB (probe6:aacp0:0:6:0): Vendor Specific Command. CDB: 12 1 80 0 ff 0 (probe6:aacp0:0:6:0): ILLEGAL REQUEST asc:24,0 (probe6:aacp0:0:6:0): Invalid field in CDB (probe1:aacp0:0:6:1): INQUIRY. CDB: 12 20 0 0 24 0 (probe1:aacp0:0:6:1): ILLEGAL REQUEST asc:25,0 (probe1:aacp0:0:6:1): Logical unit not supported (probe1:aacp0:0:6:2): INQUIRY. CDB: 12 40 0 0 24 0 (probe1:aacp0:0:6:2): ILLEGAL REQUEST asc:25,0 (probe1:aacp0:0:6:2): Logical unit not supported (probe1:aacp0:0:6:3): INQUIRY. CDB: 12 60 0 0 24 0 (probe1:aacp0:0:6:3): ILLEGAL REQUEST asc:25,0 (probe1:aacp0:0:6:3): Logical unit not supported (probe1:aacp0:0:6:4): INQUIRY. CDB: 12 80 0 0 24 0 (probe1:aacp0:0:6:4): ILLEGAL REQUEST asc:25,0 (probe1:aacp0:0:6:4): Logical unit not supported (probe1:aacp0:0:6:5): INQUIRY. CDB: 12 a0 0 0 24 0 (probe1:aacp0:0:6:5): ILLEGAL REQUEST asc:25,0 (probe1:aacp0:0:6:5): Logical unit not supported (probe1:aacp0:0:6:6): INQUIRY. CDB: 12 c0 0 0 24 0 (probe1:aacp0:0:6:6): ILLEGAL REQUEST asc:25,0 (probe1:aacp0:0:6:6): Logical unit not supported (probe1:aacp0:0:6:7): INQUIRY. CDB: 12 e0 0 0 24 0 (probe1:aacp0:0:6:7): ILLEGAL REQUEST asc:25,0 (probe1:aacp0:0:6:7): Logical unit not supported ses0 at aacp0 bus 0 target 6 lun 0 ses0: <ESG-SHV SCA HSBP M16 0.05> Fixed unknown SCSI-2 device ses0: 3.300MB/s transfers ses0: SAF-TE Compliant Device pass0 at aacp0 bus 0 target 0 lun 0 pass0: <MAXTOR ATLAS10K4_36SCA DFL0> Fixed unknown SCSI-3 device pass0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit) pass1 at aacp0 bus 0 target 2 lun 0 pass1: <MAXTOR ATLAS10K4_36SCA DFL0> Fixed unknown SCSI-3 device pass1: 160.000MB/s transfers (80.000MHz, offset 127, 16bit) Mounting root from ufs:/dev/aacd0s1a My firmware version for the Adaptec card is Version 4 Build 6003 and i the card is set at default 320MB/s Thanks for your time. chye
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.2.1.1.0.20030808103808.00a16110>