Date: Sat, 04 Sep 2004 17:12:34 -0400 From: Mykel <Mykel@mWare.ca> To: Hiroki Sato <hrs@freebsd.org> Cc: sparc64@freebsd.org Subject: Re: 5.3-BETA works on Naturetech 777S Message-ID: <413A2FC2.7000508@mWare.ca> In-Reply-To: <20040905.054615.27776951.hrs@eos.ocn.ne.jp> References: <20040905.054615.27776951.hrs@eos.ocn.ne.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
see message ID 20040616085518.GA8881@kt-is.co.kr tho I haven't tried it yet. Still running the June14 snap... I should try the betas... Myke Hiroki Sato wrote: >Hi, > > I tried 5.3-BETA2 on my sparc64 laptop[*] and it worked! > The dmesg is attached. > > [*] http://www.dciplano.com/p777.html > > However, console (keyboard) is slow to respond and some of the > typed characters are randomly lost. > > > >------------------------------------------------------------------------ > >GENIALstation 777S (UltraSPARC-IIe 500MHz), Keyboard Present >OpenBoot 4.0.2.12 , 512 MB memory installed, Serial #XXXXXXX. >Ethernet address X:X:X:X:X:X, Host ID: XXXXXXXX. > > > >Boot device: /pci@1f,0/pci@1,1/ide@d/cdrom@2,0:f File and args: > > > >>>FreeBSD/sparc64 boot block >>> >>> > Boot path: /pci@1f,0/pci@1,1/ide@d/cdrom@2,0:f > Boot loader: /boot/loader >Console: Open Firmware console >Boot path set to /pci@1f,0/pci@1,1/ide@d/cdrom@2,0:a > >FreeBSD/sparc64 bootstrap loader, Revision 1.0 >(root@bobbi.cse.buffalo.edu, Fri Aug 27 14:45:48 UTC 2004) >bootpath="/pci@1f,0/pci@1,1/ide@d/cdrom@2,0:a" >Loading /boot/defaults/loader.conf >/boot/kernel/kernel data=0x3a8408+0x91658 syms=[0x8+0x51ab0+0x8+0x44b58] >/ >Hit [Enter] to boot immediately, or any other key for command prompt. >Booting [/boot/kernel/kernel]... 1 second.... > >Turning off DMA for ATA. >jumping to kernel entry at 0xc0040000. >GDB: no debug ports present >KDB: debugger backends: ddb >KDB: current backend: ddb >Copyright (c) 1992-2004 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD 5.3-BETA2 #1: Sat Aug 28 21:55:40 UTC 2004 > root@bobbi.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC >WARNING: WITNESS option enabled, expect reduced performance. >Timecounter "tick" frequency 500000000 Hz quality 0 >real memory = 536870912 (512 MB) >avail memory = 500736000 (477 MB) >cpu0: Sun Microsystems UltraSparc-IIe Processor (500.00 MHz CPU) >nexus0: <Open Firmware Nexus device> >pcib0: <U2P UPA-PCI bridge> on nexus0 >pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A >pcib0: [FAST] >pcib0: [GIANT-LOCKED] >pcib0: [FAST] >pcib0: [GIANT-LOCKED] >pcib0 dvma: DVMA map: 0xc0000000 to 0xc3ffffff >pci0: <OFW PCI bus> on pcib0 >pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0 >pci1: <OFW PCI bus> on pcib1 >ebus0: <PCI-EBus3 bridge> mem 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 12.0 on pci1 >ebus0: <idprom>: incomplete >ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached) >eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0 >eeprom0: model mk48t59 >eeprom0: hostid 8080019c >ebus0: <flashprom> addr 0x1000400000-0x10007fffff (no driver attached) >ebus0: <flashprom> addr 0x1000800000-0x1000bfffff (no driver attached) >isab0: <PCI-ISA bridge> at device 7.0 on pci1 >isa0: <ISA bus> on isab0 >gem0: <Sun ERI 10/100 Ethernet Adaptor> mem 0xe0400000-0xe041ffff at device 12.1 on pci1 >miibus0: <MII bus> on gem0 >ukphy0: <Generic IEEE 802.3u media interface> on miibus0 >ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >gem0: 2kB RX FIFO, 2kB TX FIFO >gem0: Ethernet address: XX:XX:XX:XX:XX:XX >gem0: [GIANT-LOCKED] >fwohci0: <1394 Open Host Controller Interface> mem 0xe0422000-0xe04227ff,0xe0420000-0xe04207ff at device 12.2 on pci1 >fwohci0: Could not allocate irq >device_attach: fwohci0 attach returned 6 >pci1: <serial bus, USB> at device 12.3 (no driver attached) >pci1: <old, non-VGA display device> at device 3.0 (no driver attached) >atapci0: <AcerLabs Aladdin UDMA66 controller> port 0x420-0x42f,0x408-0x40b,0x410-0x417,0x418-0x41b,0x400-0x407 at device 13.0 on pci1 >ata2: channel #0 on atapci0 >ata3: channel #1 on atapci0 >pci1: <display, VGA> at device 2.0 (no driver attached) >pci1: <multimedia, audio> at device 8.0 (no driver attached) >pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0 >pci2: <OFW PCI bus> on pcib2 >Timecounters tick every 10.000 msec >md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xc04d0078 >ad0: 19077MB <FUJITSU MHM2200AT/3822> [38760/16/63] at ata2-master PIO4 >ATAPI_RESET time = 20us >acd0: DVDR <TOSHIBA DVD-ROM SD-C2502/1011> at ata3-master PIO4 > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?413A2FC2.7000508>