Date: Thu, 5 Apr 2001 15:28:41 -0400 From: "First, Tim" <firsttim@msu.edu> To: "'freebsd-alpha@freebsd.org'" <freebsd-alpha@freebsd.org> Subject: 4.3RC2 on AlphaServer 2100A (Lynx) Message-ID: <17F0EC17EF87D311BF65009027D3C39D0118F78F@ais.msu.edu>
next in thread | raw e-mail | index | archive | help
I have been attempting to install 4.3RC2 on an AlphaServer 2100A with no luck. I previously tried with 4.2 and learned after reading that there was no support for the Lynx on 4.2. I was hoping that we would be able to get this up on 4.3RC2, but have had no luck so far. Any ideas, suggestions, or help would be much appreciated. Below is a complete log of the boot with a show, show config and the boot of the 4.3RC2 cd. Thanks for your help, -tim base = 200000, image_start = 0, image_bytes = 2c800 initializing HWRPB at 2000 initializing page table at 4fff0000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code VMS PALcode V1.20-3, OSF PALcode V1.22-1 starting console on CPU 0 Testing Memory bank 0 Testing Memory bank 1 Testing Memory bank 2 Testing Memory bank 3 Configuring Memory Modules probing hose 0, PCI probing PCI-to-EISA bridge, bus 1 probing PCI-to-PCI bridge, bus 2 bus 2, slot 1 -- pka -- NCR 53C810 bus 2, slot 6 -- dra -- Mylex DAC960 bus 2, slot 7 -- ewa -- DECchip 21140-AA bus 0, slot 6 -- drb -- Mylex DAC960 bus 0, slot 7 -- ewb -- DECchip 21140-AA bus 0, slot 9 -- vga -- S3 Trio64/Trio32 starting console on CPU 1 starting console on CPU 2 os_type: UNIX - console CIPCA driver not started Memory Testing and Configuration Status Module Size Base Addr Intlv Mode Intlv Unit Status ------ ----- --------- ---------- ---------- ------ 0 512MB 00000000 2-Way 0 Passed 1 512MB 00000000 2-Way 1 Passed 2 128MB 40000000 2-Way 0 Passed 3 128MB 40000000 2-Way 1 Passed Total Bad Pages 0 Testing the System Testing the Disks (read only) Testing the Network AlphaServer 2100A Console V5.3-14, built on Oct 16 1998 at 15:28:19 P00>>>sho auto_action HALT boot_dev boot_file boot_osflags 0 boot_reset ON bootdef_dev booted_dev booted_file booted_osflags bus_probe_algorithm new char_set 0 com1_baud 9600 com1_flow SOFTWARE com1_modem OFF com2_baud 9600 com2_flow SOFTWARE com2_modem OFF console serial controlp ON cpu_enabled ff d_bell off d_cleanup on d_complete off d_eop off d_group field d_harderr halt d_loghard on d_logsoft off d_omit d_oper on d_passes 1 d_quick off d_report full d_runtime 0 d_softerr halt d_startup off d_status off d_trace off d_verbose 0 dump_dev enable_audit ON ewa0_arp_tries 3 ewa0_bootp_file ewa0_bootp_server ewa0_bootp_tries 3 ewa0_def_ginetaddr 0.0.0.0 ewa0_def_inetaddr 0.0.0.0 ewa0_def_inetfile ewa0_def_sinetaddr 0.0.0.0 ewa0_def_subnetmask 0.0.0.0 ewa0_ginetaddr 0.0.0.0 ewa0_inet_init bootp ewa0_inetaddr 0.0.0.0 ewa0_inetfile ewa0_loop_count 2 ewa0_loop_inc d0 ewa0_loop_patt ffffffff ewa0_loop_size 100 ewa0_lp_msg_node 8 ewa0_mode AUI ewa0_protocols MOP ewa0_sinetaddr 0.0.0.0 ewa0_tftp_tries 3 ewb0_arp_tries 3 ewb0_bootp_file ewb0_bootp_server ewb0_bootp_tries 3 ewb0_def_ginetaddr 0.0.0.0 ewb0_def_inetaddr 0.0.0.0 ewb0_def_inetfile ewb0_def_sinetaddr 0.0.0.0 ewb0_def_subnetmask 0.0.0.0 ewb0_ginetaddr 0.0.0.0 ewb0_inet_init bootp ewb0_inetaddr 0.0.0.0 ewb0_inetfile ewb0_loop_count 2 ewb0_loop_inc d0 ewb0_loop_patt ffffffff ewb0_loop_size 100 ewb0_lp_msg_node 8 ewb0_mode Fast ewb0_protocols MOP ewb0_sinetaddr 0.0.0.0 ewb0_tftp_tries 3 exdep_data 0 exdep_location 0 exdep_size 0 exdep_space pmem exdep_type 3 external_mb ON full_powerup_diags ON heap_expand NONE i g j u kbd_hardware_type PCXAL language 36 language_name English (American) license MU ocp_text ocp_text_default Model 4/200 os_type UNIX pal VMS PALcode V1.20-3, OSF PALcode V1.22-1 pci_arb Partial-Rotating pci_parity ON pka0_disconnect 1 pka0_fast 1 pka0_host_id 7 rcm_answer rcm_dialout rcm_init screen_mode ON scsi_poll ON scsi_reset ON scsnode scssystemid 65534 scssystemidh 0 srm2dev sys_serial_num tga_sync_green 8 tt_allow_login 1 tty_dev 0 version V5.3-14 Oct 16 1998 15:28:19 P00>>>show conf Digital Equipment Corporation AlphaServer 2100A 5/250 SRM Console V5.3-14 VMS PALcode V1.20-3, OSF PALcode V1.22-1 Component Status Module ID CPU 0 P B2040-AB DECchip (tm) 21164-5 CPU 1 P B2040-AB DECchip (tm) 21164-5 CPU 2 P B2040-AB DECchip (tm) 21164-5 Memory 0 P B2022-FA 512 MB Memory 1 P B2022-FA 512 MB Memory 2 P B2021-FA 128 MB Memory 3 P B2022-DA 128 MB I/O 24283-01 dva0.0.0.1000.0 RX26/RX23 Slot Option Hose 0, Bus 0, PCI 2 Intel 82375 Bridge to Bus 1, EISA 3 DECchip 21050-AA Bridge to Bus 2, PCI 6 Mylex DAC960 drb.0.0.6.0 drb0.0.0.6.0 6 Member RAID 5 drb1.0.0.6.0 6 Member RAID 5 drb2.0.0.6.0 6 Member RAID 5 7 DECchip 21140-AA ewb0.0.0.7.0 00-00-F8-01-84-89 9 S3 Trio64/Trio32 Slot Option Hose 0, Bus 1, EISA Slot Option Hose 0, Bus 2, PCI 1 NCR 53C810 pka0.7.0.2001.0 SCSI Bus ID 7 dka0.0.0.2001.0 RZ28D dka100.1.0.2001.0 RZ28D dka500.5.0.2001.0 RRD45 mka600.6.0.2001.0 TLZ07 6 Mylex DAC960 dra.0.0.2006.0 dra0.0.0.2006.0 6 Member RAID 5 dra1.0.0.2006.0 6 Member RAID 5 7 DECchip 21140-AA ewa0.0.0.2007.0 00-00-F8-01-81-09 P00>>>boot dka500 (boot dka500.5.0.2001.0 -flags 0) block 0 of dka500.5.0.2001.0 is a valid boot block reading 356 blocks from dka500.5.0.2001.0 bootstrap code read in base = 200000, image_start = 0, image_bytes = 2c800 initializing HWRPB at 2000 initializing page table at 4fff0000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code Console: SRM firmware console VMS PAL rev: 0x4000300010114 OSF PAL rev: 0x4000100020116 Switch to OSF PAL code succeeded. FreeBSD/alpha SRM CD9660 boot, Revision 0.1 (jkh@beast.freebsd.org, Mon Mar 20 21:08:56 GMT 2000) Memory: 1310720 k |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-> echo \007\007 > autoboot 10 Hit [Enter] to boot immediately, or any other key for command prompt. Booting [kernel] in 9 seconds... Booting [kernel] in 8 seconds... Booting [kernel] in 7 seconds... Booting [kernel] in 6 seconds... Booting [kernel]... \|/- (EDITED TO REMOVE DUPLICATION) /kernel data=0x5f9198+0x27868 \|/- (EDITED TO REMOVE DUPLICATION) Entering kernel at 0xfffffc000032b740... Unrecognized boot flag '0'. Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-RC2 #1: Sat Mar 31 00:13:44 GMT 2001 root@jkh234.osd.bsdi.com:/usr/src/sys/compile/BOOTMFS DEC AlphaServer 2100A AlphaServer 2100A 5/250, 250MHz 8192 byte page size, 3 processors. CPU: EV5 (21164) major=5 minor=5 OSF PAL rev: 0x4000100020116 real memory = 1340006400 (1308600K bytes) avail memory = 1296769024 (1266376K bytes) Preloaded elf kernel "kernel" at 0xfffffc0000924000. md1: Malloc disk t20: using interrupt type 1 on pci bus 0 halted CPU 0 halt code = 7 machine check while in PAL mode PC = 1608c P00>>> ---- Timothy D. First, MCSE, CNA firsttim@msu.edu Information Technologist II (517) 353-4420 x335 Administrative Information Services Fax: (517) 355-5176 Michigan State University To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?17F0EC17EF87D311BF65009027D3C39D0118F78F>