From owner-freebsd-mobile Fri Dec 27 7:36:51 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id DE23737B401 for ; Fri, 27 Dec 2002 07:36:48 -0800 (PST) Received: from mpool.solaris.ru (mpool.solaris.ru [194.85.25.2]) by mx1.FreeBSD.org (Postfix) with ESMTP id 0F87C43EC2 for ; Fri, 27 Dec 2002 07:36:48 -0800 (PST) (envelope-from kirill@mpool.solaris.ru) Received: from mpool.solaris.ru (localhost.solaris.ru [127.0.0.1]) by mpool.solaris.ru (8.12.3/8.12.6) with ESMTP id gBRFaldE066009; Fri, 27 Dec 2002 18:36:47 +0300 (MSK) (envelope-from kirill@mpool.solaris.ru) Received: (from kirill@localhost) by mpool.solaris.ru (8.12.3/8.12.6/Submit) id gBRFalYl066008; Fri, 27 Dec 2002 18:36:47 +0300 (MSK) Date: Fri, 27 Dec 2002 18:36:47 +0300 From: Kirill Bezzubets To: Pat Lathem Cc: freebsd-mobile@freebsd.org Subject: Re: 4.7 -> 5.0 Pccard problems (more info) Message-ID: <20021227153647.GB64571@solaris.ru> References: <20021226094524.GA10382@solaris.ru> <3E0B1056.6050300@ivestnw.net> <20021227092429.GA5786@solaris.ru> <3E0C64D5.60209@ivestnw.net> Mime-Version: 1.0 Content-Type: text/plain; charset=koi8-r Content-Disposition: inline In-Reply-To: <3E0C64D5.60209@ivestnw.net> User-Agent: Mutt/1.5.1i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org On Fri, Dec 27, 2002 at 06:33:57AM -0800, Pat Lathem wrote: > I am running 5.0 current from a few days ago. I upgrade fairly often > hoping that it will be fixed. > > When I booted with the -v flag, everything proceeded normally until I > attempted to power up the slot the card was in (pccardc power 0 1) . The > first two lines are shown to the console, and then the third line is > printed repeatedly: > pcic0: reset 1 int is 0 stat is 0 > pcic0: reset 2 int is 0 stat is 0 > pcic0: reset 3 int is 0 stat is 0 (<-- this one is then repeated in a > loop until the slot is powered down) > > Does anyone know what this means? I guess Warner Losh could help here if he has enough time to look at this. > > After I power it down (pccardc power 0 0): > pcic0: reset 0 > > Here is the output from dmesg (I am still using OLDCARD) > > [trashcan]~: dmesg | grep pcic0 > pcic0: irq 11 at device 6.0 on pci2 > pcic0: PCI Memory allocated: 0xd0200000 > pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr > save][CSC serial isa irq] > pccard0: on pcic0 > > [trashcan]~: dmesg | grep pci2 > pci2: on pcib2 > pci2: at device 4.0 (no driver attached) > pci2: at device 5.0 (no driver attached) > pcic0: irq 11 at device 6.0 on pci2 > fxp0: port 0x3040-0x307f mem > 0xd0215000-0xd0215fff irq 10 at device 8.0 on pci2 > > > Pat Lathem > > Kirill Bezzubets wrote: > > >On Thu, Dec 26, 2002 at 06:21:10AM -0800, Pat Lathem wrote: > > > > > > > >>>>cbb0: irq 11 at device 6.0 on pci2 > >>>>cardbus0: on cbb0 > >>>>pccard0: <16-bit PCCard bus> on cbb0 > >>>> > >>>> > >>>> > >>The card is a supported IBM 56k modem (I also have been expirementing > >>with a Linksys wireless card). The kernel does not say anything when I > >>insert or remove it (with GENERIC), which is why I assumed it was not > >>being detected properly. Since I posted the, I have reverted to the > >>kernel OLDCARD. After the computer boots, I can run 'pccardc power 0 1' > >>and it starts to initialize the card, but fails to read the correct > >>vendor string from the pccard. I'm currently changing the hints file (at > >>the advice of Greg Smith) to see if it can work. My question is this: Is > >>this is a regression? In 4.7-stable I only had to add to /etc/rc.conf > >>"pccard_enable="YES"' and reboot (or start pccardd) to get my cards > >>working. Was I just lucky that it just worked the first time, or is > >>there a problem? > >> > >> > > > >One more thing from your dmesg output (sorry, just noticed..): > > > >cbb0: Unsupported card type detected > > > >I guess it's a kind of bug with TI1410 (???), not sure though. > >Because mine is TI1131 PCI-CardBus Bridge and everything works well > >with both 16bit(PCCard) and 32bit(CardBus) cards using NEWCARD. > >Also it did work in 4-STABLE since 4.3 with PCCards. > > -- BR, Kirill Bezzubets CASE-RIPE CASE-RIPN Senior Administrator, Technical Department mailto:kirill@solaris.ru Solaris ISP & Telecommunications Co. Ltd http://www.solaris.ru To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message