Date: Fri, 24 Jun 2005 21:10:25 -0400 From: "Scott Hiemstra" <scott@hiemstra.us> To: <freebsd-sparc@FreeBSD.org> Subject: Hardware List Message-ID: <20050625011044.3141543D48@mx1.FreeBSD.org>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_005E_01C57901.2540F770
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
I saw on the hardware page that the Enterprise 3000 wasn't listed but the
3500 was listed as netboot only, they are similar so I thought I would try
anyway. My system has the default SCSI controller, 4x170MHz procesors and 1
x 18GB drive; 5.3 installed just fine. My dmesg output is attached just as
an FYI and I will let you know how 5.4 does as well. If any testing is
needed on this hardware, let me know and I will do my best to assist.
Scott
Scott Hiemstra
scott@hiemstra.us
------=_NextPart_000_005E_01C57901.2540F770
Content-Type: text/plain;
name="monster.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="monster.txt"
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights =
reserved.
FreeBSD 5.3-RELEASE #0: Fri Nov 5 19:30:40 UTC 2004
root@bobbi.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
real memory =3D 402653184 (384 MB)
avail memory =3D 373112832 (355 MB)
cpu0: Sun Microsystems UltraSparc-I Processor (168.00 MHz CPU)
cpu1: Sun Microsystems UltraSparc-I Processor (168.00 MHz CPU)
cpu2: Sun Microsystems UltraSparc-I Processor (168.00 MHz CPU)
cpu3: Sun Microsystems UltraSparc-I Processor (168.00 MHz CPU)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
nexus0: <Open Firmware Nexus device>
central0: <central> on nexus0
fhc0: <fhc> on central0
eeprom0: <EEPROM/clock> mem 0x908000-0x909fff on fhc0
eeprom0: model mk48t59
eeprom0: hostid 807d6554
zs0: <Zilog Z8530> mem 0x902000-0x902007 on fhc0
zs0: [FAST]
zstty0: <ttya> on zs0
zstty1: <ttyb> on zs0
fhc0: <zs> mem 0x904000-0x904007 type serial (no driver attached)
fhc0: <clock-board> mem 0x906000-0x90605f,0x900000-0x900005 type unknown =
(no driver attached)
fhc1: <fhc> on nexus0
fhc1: <ac> mem 0x2000000-0x2ffffff,0x1000000-0x1007fff type =
memory-controller (no driver attached)
fhc1: <simm-status> mem 0x600000-0x60000f type unknown (no driver =
attached)
fhc1: <environment> mem 0x400000-0x40000f type unknown (no driver =
attached)
fhc1: <sram> mem 0x280000-0x287fff,0x200000-0x207fff type unknown (no =
driver attached)
fhc1: <flashprom> mem 0-0x7ffff type unknown (no driver attached)
fhc2: <fhc> on nexus0
fhc2: <ac> mem 0x2000000-0x2ffffff,0x1000000-0x1007fff type =
memory-controller (no driver attached)
fhc2: <simm-status> mem 0x600000-0x60000f type unknown (no driver =
attached)
fhc2: <environment> mem 0x400000-0x40000f type unknown (no driver =
attached)
fhc2: <sram> mem 0x280000-0x287fff,0x200000-0x207fff type unknown (no =
driver attached)
fhc2: <flashprom> mem 0-0x7ffff type unknown (no driver attached)
sbus0: clock 25.000 MHz
sbus dvma: DVMA map: 0xfc000000 to 0xffffffff
sbus0: [FAST]
sbus0: [FAST]
initializing counter-timer
Timecounter "counter-timer" frequency 1000000 Hz quality 100
sbus0: <U2S UPA-SBus bridge> on nexus0
sbus0: <SUNW,soc>, type (unknown) (no driver attached)
sbus0: <cgsix>, type display (no driver attached)
fhc3: <fhc> on nexus0
fhc3: <ac> mem 0x2000000-0x2ffffff,0x1000000-0x1007fff type =
memory-controller (no driver attached)
fhc3: <environment> mem 0x400000-0x40000f type unknown (no driver =
attached)
fhc3: <flashprom> mem 0-0x7ffff type unknown (no driver attached)
eeprom1: <EEPROM/clock> mem 0x300000-0x301fff on fhc3
eeprom1: model mk48t59
eeprom1: hostid 807d6554
fhc3: <sbus-speed> mem 0x500000-0x50000f type unknown (no driver =
attached)
sbus1: clock 25.000 MHz
sbus dvma: DVMA map: 0xfc000000 to 0xffffffff
sbus1: [FAST]
sbus1: [FAST]
initializing counter-timer
Timecounter "counter-timer" frequency 1000000 Hz quality 100
sbus1: <U2S UPA-SBus bridge> on nexus0
hme0: <Sun HME 10/100 Ethernet> mem =
0x8c07000-0x8c0701f,0x8c06000-0x8c07fff,0x8c04000-0x8c05fff,0x8c02000-0x8=
c03fff,0x8c00000-0x8c00107 irq 220 on sbus1
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: 08:00:20:7d:65:54
hme0: if_start running deferred for Giant
hme0: [GIANT-LOCKED]
esp0: <Sun FAS366 Fast-Wide SCSI> mem =
0x8810000-0x881003f,0x8800000-0x880000f irq 219 on sbus1
esp0: [GIANT-LOCKED]
esp0: FAS366/HME, 40MHz, SCSI ID 7
Timecounters tick every 10.000 msec
Waiting 15 seconds for SCSI devices to settle
da0 at esp0 bus 0 target 1 lun 0
da0: <QUANTUM ATLAS V 18 SCA 0201> Fixed Direct Access SCSI-3 device
da0: 20.000MB/s transfers (10.000MHz, offset 15, 16bit), Tagged Queueing =
Enabled
da0: 17366MB (35566499 512 byte sectors: 255H 63S/T 2213C)
cd0 at esp0 bus 0 target 6 lun 0
cd0: <TOSHIBA XM-5401TASUN4XCD 3485> Removable CD-ROM SCSI-2 device
cd0: 4.032MB/s transfers (4.032MHz, offset 15)
cd0: cd present [519064 x 512 byte records]
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/da0a
------=_NextPart_000_005E_01C57901.2540F770--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050625011044.3141543D48>