Date: Wed, 14 Jan 2009 06:23:30 -0600 (CST) From: Wes Morgan <morganw@chemikals.org> To: freebsd-scsi@freebsd.org Subject: SMART status of SATA drives on SAS controller Message-ID: <alpine.BSF.2.00.0901140612150.8644@ibyngvyr.purzvxnyf.bet>
next in thread | raw e-mail | index | archive | help
I've got 8 SATA2 drives in an zfs raidz2 on an LSI controller (1068 I believe, mpt driver), and one of them seems to be acting strangely. I'd like to get the smart status without pulling it out of the array and dropping it onto an ATA controller, but I don't seem to be able to for any of the drives. Using the device type as both "SAT" and "SCSI", neither will successfully show the full output. Is there any way around this? Error below... === START OF INFORMATION SECTION === Device Model: WDC WD5002ABYS-01B1B0 Serial Number: WD-WCASY3240847 Firmware Version: 02.03B02 User Capacity: 500,107,862,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Jan 14 06:14:18 2009 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF ENABLE/DISABLE COMMANDS SECTION === SMART Enabled. (pass4:mpt0:0:4:0): ATA COMMAND PASS THROUGH(16). CDB: 85 6 2c 0 da 0 0 0 0 0 4f 0 c2 0 b0 0 (pass4:mpt0:0:4:0): CAM Status: SCSI Status Error (pass4:mpt0:0:4:0): SCSI Status: Check Condition (pass4:mpt0:0:4:0): RECOVERED ERROR asc:0,1d (pass4:mpt0:0:4:0): ATA pass through information available SMART Disabled. Use option -s with argument 'on' to enable it.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.00.0901140612150.8644>