Date: Fri, 07 May 1999 02:52:15 +0300 From: Iani Brankov <ian@bulinfo.net> To: Daniel Lundqvist <daniel@noc.dn.se> Cc: Freebsd-questions <freebsd-questions@freebsd.org> Subject: Re: Microstar mainboard Message-ID: <37322B2F.46305A11@bulinfo.net> References: <3.0.6.32.19990506112817.007ac1a0@qatar.net.qa> <19990506235215.A23146@noc.dn.se>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Daniel Lundqvist wrote:
>
> Hi,
>
> I just bought a Microstar MS6120N dual mainboard and i have couple of
> problems:
I have the same one. (w/o a SCSI)
>
> 1: The kernel spits out "Bad SMBIOS table checksum!"
> when it boots,it seems to work ok anyway,but it would
> be nice to know what's wrong
Ok. I have the same 'problem'. It's harmless I think.
> 2: FreeBSD doesn't find any of the onboard IDE controllers
>
Take a look at my dmesg & config. Everything is ok with my the IDE controllers.
PS. I've seen motherboards/bioses disabling the ide interface when there's
nothing connected to it.
--iani
[-- Attachment #2 --]
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-STABLE #33: Fri Apr 30 21:50:55 EEST 1999
root@cserv.oksys.bg:/usr/src/sys/compile/cserv
Timecounter "i8254" frequency 1193226 Hz
CPU: Pentium II/Xeon/Celeron (686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping=2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>>
real memory = 67043328 (65472K bytes)
config> pnp 1 0 enable os port0 0x220 port1 0x330 port2 200 irq0 5 drq0 1 drq1 5
config> quit
avail memory = 62230528 (60772K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Bad SMBIOS table checksum!
Preloaded elf kernel "kernel" at 0xc02d0000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02d009c.
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
vga0: <S3 Trio graphics accelerator> rev 0x00 int a irq 16 on pci0.18.0
Probing for devices on PCI bus 1:
Probing for PnP devices:
CSN 1 Vendor ID: CTL0070 [0x70008c0e] Serial 0xffffffff Comp ID: PNPb02f [0x2fb0d041]
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x300-0x31f irq 10 on isa
ed0: address 52:54:4c:03:77:25, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2: configured irq 5 not in bitmap of probed irqs 0
sio2 not found at 0x3e8
ppc0 at 0x378 irq 7 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.2MB 5.25in
wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa
wdc0: unit 0 (wd0): <QUANTUM FIREBALL SE2.1A>, DMA, 32-bit, multi-block-16
wd0: 2014MB (4124736 sectors), 4092 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): <QUANTUM FIREBALL SE3.2A>, DMA, 32-bit, multi-block-16
wd1: 3079MB (6306048 sectors), 6256 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 flags 0xa0ffa0ff on isa
wdc1: unit 0 (atapi): <FX3400S/u01>, removable, accel, dma, iordis
acd0: drive speed 5857KB/sec, 128KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA, packet track
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm audio disc loaded, unlocked
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 5 drq 1 on isa
snd0: <SoundBlaster 16 4.13>
sbxvi0 at drq 5 on isa
snd0: <SoundBlaster 16 4.13>
sbmidi0 at 0x330 on isa
snd0: <SoundBlaster MPU-401>
joy0 at 0x201 on isa
joy0: joystick
apm0 not probed due to I/O address conflict with sbxvi0 at 0xffffffff
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
changing root device to wd0s1a
SMP: AP CPU #1 Launched!
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
[-- Attachment #3 --]
#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# For more information read the handbook part System Administration ->
# Configuring the FreeBSD Kernel -> The Configuration File.
# The handbook is available in /usr/share/doc/handbook or online as
# latest version from the FreeBSD World Wide Web server
# <URL:http://www.FreeBSD.ORG/>;
#
# An exhaustive list of options and more detailed explanations of the
# device lines is present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $Id: GENERIC,v 1.77.2.4 1997/02/22 20:31:24 joerg Exp $
machine "i386"
cpu "I686_CPU"
ident cserv
maxusers 32
options SMP
options APIC_IO
options INET #InterNETworking
options NETATALK
options FFS #Berkeley Fast Filesystem
options NFS #Network Filesystem
options "CD9660" #ISO 9660 Filesystem
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options SOFTUPDATES
options PQ_LARGECACHE
options INCLUDE_CONFIG_FILE
options DDB
options CLK_CALIBRATION_LOOP
options "CLK_USE_I8254_CALIBRATION"
options CLK_USE_TSC_CALIBRATION
options USER_LDT
options SYSVSHM
options SYSVSEM
options SYSVMSG
options "VM86"
options "AUTO_EOI_1"
config kernel root on wd0
controller pnp0
controller isa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
controller wdc0 at isa? port "IO_WD1" bio irq 14 flags 0xa0ffa0ff
disk wd0 at wdc0 drive 0
disk wd1 at wdc0 drive 1
controller wdc1 at isa? port "IO_WD2" bio irq 15 flags 0xa0ffa0ff
disk wd2 at wdc1 drive 0
disk wd3 at wdc1 drive 1
options ATAPI #Enable ATAPI support for IDE bus
options ATAPI_STATIC
device acd0
device vga0 at isa? port ? conflicts
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? tty
options MAXCONS=16
options SC_HISTORY_SIZE=200
options "SC_MOUSE_CHAR=0x03"
# Mandatory, don't remove
device npx0 at isa? port "IO_NPX" iosiz 0x0 flags 0x0 irq 13
device sio0 at isa? port "IO_COM1" tty irq 4
device sio1 at isa? port "IO_COM2" tty irq 3
device sio2 at isa? port "IO_COM3" tty irq 5
device sio3 at isa? disable port "IO_COM4" tty irq 9
controller snd0
device sb0 at isa? port 0x220 irq 5 drq 1
device sbxvi0 at isa? drq 5
device sbmidi0 at isa? port 0x330
device joy0 at isa? port IO_GAME
controller ppc0 at isa? port ? tty irq 7
controller ppbus0
device nlpt0 at ppbus?
controller atkbdc0 at isa? port IO_KBD tty
device atkbd0 at isa? tty irq1
device psm0 at isa? tty irq 12
device apm0 at isa?
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
device ed0 at isa? port 0x300 net irq 10 iomem 0xd8000
pseudo-device loop
pseudo-device ether
pseudo-device sl 1
pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 16
pseudo-device bpfilter 8
pseudo-device speaker
pseudo-device snp 2
pseudo-device vn
options PPP_BSDCOMP #PPP BSD-compress support
options PPP_DEFLATE #PPP zlib/deflate/gzip support
options PPP_FILTER #enable bpf filtering (needs bpfilter)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?37322B2F.46305A11>