Date: Sat, 12 May 2012 17:41:42 +0000 (UTC) From: Adrian Chadd <adrian@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r235345 - head/sys/mips/conf Message-ID: <201205121741.q4CHfgJw044443@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: adrian Date: Sat May 12 17:41:42 2012 New Revision: 235345 URL: http://svn.freebsd.org/changeset/base/235345 Log: Flip on WN1043ND switch PHY support. * Add the i2c bitbang bus; * Add the etherswitch/rtl8366rb drivers; * "fix" the USB GPIO configuration so USB actually works. Submitted by: Stefan Bethke <stb@lassitu.de> Modified: head/sys/mips/conf/AR91XX_BASE head/sys/mips/conf/TP-WN1043ND head/sys/mips/conf/TP-WN1043ND.hints Modified: head/sys/mips/conf/AR91XX_BASE ============================================================================== --- head/sys/mips/conf/AR91XX_BASE Sat May 12 17:14:55 2012 (r235344) +++ head/sys/mips/conf/AR91XX_BASE Sat May 12 17:41:42 2012 (r235345) @@ -35,7 +35,7 @@ options _KPOSIX_PRIORITY_SCHEDULING #Po # PMC options HWPMC_HOOKS -device hwpmc +#device hwpmc # options NFS_LEGACYRPC # Debugging for use in -current Modified: head/sys/mips/conf/TP-WN1043ND ============================================================================== --- head/sys/mips/conf/TP-WN1043ND Sat May 12 17:14:55 2012 (r235344) +++ head/sys/mips/conf/TP-WN1043ND Sat May 12 17:41:42 2012 (r235345) @@ -15,6 +15,18 @@ hints "TP-WN1043ND.hints" # Force the board memory - 32mb options AR71XX_REALMEM=32*1024*1024 +# i2c GPIO bus +device gpioiic +device iicbb +device iicbus +device iic + +# ethernet switch device +device etherswitch + +# RTL8366RB support +device rtl8366rb + # read MSDOS formatted disks - USB options MSDOSFS options GEOM_PART_BSD @@ -33,3 +45,7 @@ device geom_map # Boot off of the rootfs, as defined in the geom_map setup. options ROOTDEVNAME=\"ufs:map/rootfs.uzip\" + +# Etherswitch support +device etherswitch +device rtl8366rb Modified: head/sys/mips/conf/TP-WN1043ND.hints ============================================================================== --- head/sys/mips/conf/TP-WN1043ND.hints Sat May 12 17:14:55 2012 (r235344) +++ head/sys/mips/conf/TP-WN1043ND.hints Sat May 12 17:41:42 2012 (r235345) @@ -82,7 +82,7 @@ hint.map.4.readonly=1 # Don't flip on anything that isn't already enabled. # This includes leaving the SPI CS1/CS2 pins as GPIO pins as they're # not used here. -hint.gpio.0.function_set=0x00000000 +hint.gpio.0.function_set=0x00002000 hint.gpio.0.function_clear=0x00000000 # These are the GPIO LEDs and buttons which can be software controlled. @@ -102,9 +102,9 @@ hint.gpio.0.pinmask=0x001c02ae # Pin 20 - "GPIO20" # LEDs are configured separately and driven by the LED device -hint.gpioled.0.at="gpiobus0" -hint.gpioled.0.name="usb" -hint.gpioled.0.pins=0x0002 +#hint.gpioled.0.at="gpiobus0" +#hint.gpioled.0.name="usb" +#hint.gpioled.0.pins=0x0002 hint.gpioled.1.at="gpiobus0" hint.gpioled.1.name="system" @@ -117,3 +117,17 @@ hint.gpioled.2.pins=0x0020 hint.gpioled.3.at="gpiobus0" hint.gpioled.3.name="wlan" hint.gpioled.3.pins=0x0200 + +# GPIO I2C bus +hint.gpioiic.0.at="gpiobus0" +hint.gpioiic.0.pins=0xc0000 +hint.gpioiic.0.scl=1 +hint.gpioiic.0.sda=0 + +# I2C bus +# Don't be strict about I2C protocol - the relaxed semantics are required +# by the realtek switch PHY. +hint.iicbus.0.strict=0 + +# Bit bang bus - override default delay +#hint.iicbb.0.udelay=3
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201205121741.q4CHfgJw044443>