Date: Mon, 10 Mar 1997 20:48:12 -0700 (MST) From: Kevin Van Maren <vanmaren@marker.cs.utah.edu> To: FreeBSD-gnats-submit@freebsd.org Subject: kern/2944: NCR/SYM875 card with Ultra drive Message-ID: <199703110348.UAA12884@marker.cs.utah.edu> Resent-Message-ID: <199703110350.TAA23574@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 2944
>Category: kern
>Synopsis: NCR/SYM875 card with Ultra drive
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Mon Mar 10 19:50:03 PST 1997
>Last-Modified:
>Originator: Kevin Van Maren
>Organization:
University of Utah, CSL
>Release: FreeBSD 2.2-970225-GAMMA i386
>Environment:
FreeBSD 2.2-970225-GAMMA generic install kernel.
>Description:
I boot the kernel: 2:sd(0,a)/kernel (from install floppy)
When "changing root device to sd0a" comes up, the machine sits there
for several minutes, until it continues (after printing an error
message). The machine appears to operate correctly after that.
changing root device to sd0a
ncr0: aborting job ...
ncr0:6: ERROR (90:0) (8-0-0) (0/13) @ (a54:50000000).
script cmd = 740a8f00
reg: de 00 00 13 47 00 0f 0f 35 08 86 00 90 00 0f 02.
ncr0: restart (fatal error).
sd0(ncr0:6:0): COMMAND FAILED (9 ff) @f19f9c00.
sd0(ncr0:6:0): 10.0 MB/s (100 ns, offset 15)
========
Also, note that Ultra negotiation is not enabled by the driver,
although the BIOS does initially enable it.
Here is the complete `dmesg' output:
========
Copyright (c) 1992-1996 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2-970225-GAMMA #0: Tue Feb 25 13:16:19 GMT 1997
root@admin1.calweb.com:/usr/src/sys/compile/GENERIC
Calibrating clock(s) relative to mc146818A clock ... i586 clock: 90211866 Hz, i8
254 clock: 1193281 Hz
CPU: Pentium (90.20-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x524 Stepping=4
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 50331648 (49152K bytes)
avail memory = 46309376 (45224K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82434NX (Neptune) PCI cache memory controller> rev 17 on pci0:0
chip1 <Intel 82378ZB PCI-ISA bridge> rev 3 on pci0:2
ncr0 <ncr 53c875 wide scsi> rev 3 int a irq 10 on pci0:6
ncr0 waiting for scsi devices to settle
(ncr0:6:0): "QUANTUM FIREBALL_TM3200S 300X" type 0 fixed SCSI 2
sd0(ncr0:6:0): Direct-Access
sd0(ncr0:6:0): 10.0 MB/s (100 ns, offset 15)
3067MB (6281856 512 byte sectors)
vga0 <Display device> rev 0 on pci0:12
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
ed1 not found at 0x300
fe0 not found at 0x300
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2: disabled, not probed.
sio3: disabled, not probed.
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found at 0xffffffff
mse0 not found at 0x23c
psm0: disabled, not probed.
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
fd1: 1.2MB 5.25in
ft0: Colorado tape
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <WDC AC2420H>
wd0: 405MB (830760 sectors), 989 cyls, 15 heads, 56 S/T, 512 B/S
wdc0: unit 1 (wd1): <WDC AC31200F>
wd1: 1222MB (2503872 sectors), 2484 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <HITACHI CDR-8130/0020>, removable, accel, dma, iordy
wcd0: 1377/2755Kb/sec, 128Kb cache, audio play, 255 volume levels, ejectable tra
y
wcd0: 120mm data disc loaded, unlocked
bt0 not found at 0x330
uha0 not found at 0x330
aha0 not found at 0x330
aic0 not found at 0x340
nca0 not found at 0x1f88
nca1 not found at 0x350
sea0 not found
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ie0 not found at 0x360
ep0 not found at 0x300
ex0 not found at 0x300
ix0 not found at 0x300
le0 not found at 0x300
lnc0 not found at 0x280
ze0 not found at 0x300
zp0 not found at 0x300
npx0 on motherboard
npx0: INT 16 interface
apm0: disabled, not probed.
changing root device to sd0a
ncr0: aborting job ...
ncr0:6: ERROR (90:0) (8-0-0) (0/13) @ (a54:50000000).
script cmd = 740a8f00
reg: de 00 00 13 47 00 0f 0f 35 08 86 00 90 00 0f 02.
ncr0: restart (fatal error).
sd0(ncr0:6:0): COMMAND FAILED (9 ff) @f19f9c00.
sd0(ncr0:6:0): 10.0 MB/s (100 ns, offset 15)
========
>How-To-Repeat:
Boot Quantum 3.2GB Fireball on NCR/SYM875 SCSI host adapter.
>Fix:
Unknown
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199703110348.UAA12884>