Date: Mon, 6 Jan 2014 06:24:08 -0800 From: Adrian Chadd <adrian@freebsd.org> To: Alexandr <shuriku@shurik.kiev.ua> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: Problem connecting to AP Message-ID: <CAJ-Vmok0JFLBemBOrB0YUnJ0OkJQEwuh1Mg75W52zWxXYrDpvg@mail.gmail.com> In-Reply-To: <52CAB6F2.3010707@shurik.kiev.ua> References: <52CAB6F2.3010707@shurik.kiev.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
The passphrase 'secret' is too short for WPA.
I gather it's not _that_, but is it long enough to meet WPA reuirements?
Have you tried removing the proto= and bssid lines? You don't strictly
need them.
Thanks!
-a
On 6 January 2014 06:00, Alexandr <shuriku@shurik.kiev.ua> wrote:
> Hello,
>
> I recently upgraded system on my laptop to current with a hope to get my
> wireless card working. Now it successfully recognized by kernel:
>
> iwn0: <Intel Centrino Wireless-N 2230> mem 0xf2d00000-0xf2d01fff irq 17
> at device 0.0 on pci3
>
> Unfortunately, I can't connect to my home access point:
>
> wpa_supplicant[519]: wlan0: CTRL-EVENT-DISCONNECTED
> bssid=54:e6:fc:e4:48:c4 reason=0
> wpa_supplicant[519]: wlan0: WPA: 4-Way Handshake failed - pre-shared key
> may be incorrect
> wpa_supplicant[519]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0
> ssid="door" auth_failures=10 duration=30
>
> I tried different security settings (WPA-WPA2 + AES-TKIP), wireless
> modes, radio channels on my access point, the same error.
>
> # ifconfig wlan0
> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> ether 68:5d:43:92:3a:88
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
> status: no carrier
> ssid door channel 1 (2412 MHz 11g ht/40+)
> country US authmode WPA2/802.11i privacy ON deftxkey UNDEF
> txpower 13
> bmiss 10 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250
> roam:rssi 7 roam:rate 64 protmode CTS ampdulimit 8k -amsdutx amsdurx
> shortgi wme roaming MANUAL
>
> /etc/wpa_supplicant.conf:
>
> ctrl_interface=/var/run/wpa_supplicant
> ctrl_interface_group=wheel
> eapol_version=2
>
> network={
> ssid="door"
> bssid=54:e6:fc:e4:48:c4
> key_mgmt=WPA-PSK
> proto=WPA RSN
> psk="secret"
> }
>
>
> Other home devices connets to AP without problems. Can you point me how
> I can debug it?
>
>
>
> _______________________________________________
> freebsd-wireless@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmok0JFLBemBOrB0YUnJ0OkJQEwuh1Mg75W52zWxXYrDpvg>