Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 17 Aug 2008 17:45:13 -0700
From:      Joseph Olatt <joji@eskimo.com>
To:        Michael Fuckner <michael@fuckner.net>
Cc:        Fabian Wenk <fabian@wenks.ch>, freebsd-amd64@freebsd.org
Subject:   Re: amd64/125002: [install] amd64, SATA hard disks not detected
Message-ID:  <20080817174513.A28603@eskimo.com>
In-Reply-To: <48A85BAD.1080506@fuckner.net>; from michael@fuckner.net on Sun, Aug 17, 2008 at 07:11:09PM %2B0200
References:  <200808162040.m7GKe5Ob015598@freefall.freebsd.org> <48A7ED5A.3090705@wenks.ch> <20080817085535.A14465@eskimo.com> <48A85BAD.1080506@fuckner.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Aug 17, 2008 at 07:11:09PM +0200, Michael Fuckner wrote:
> Joseph Olatt wrote:
> 
> >>>  /*** Begin transcript  ***/
> >>>  [   22.014002] scsi0 : ahci
> >>>  [   22.014087] scsi1 : ahci
> >>>  [   22.014150] scsi2 : ahci
> >>>  [   22.014186] scsi3 : ahci
> >>>  [   22.014275] ata1: SATA max UDMA/133 abar m8192@0xfea7c000 port
> >>>  0xfea7c100 irq 508
> >>>  [   22.014278] ata2: SATA max UDMA/133 abar m8192@0xfea7c000 port
> >>>  0xfea7c180 irq 508
> >>>  [   22.014280] ata3: SATA max UDMA/133 abar m8192@0xfea7c000 port
> >>>  0xfea7c200 irq 508
> >>>  [   22.014283] ata4: SATA max UDMA/133 abar m8192@0xfea7c000 port
> >>>  0xfea7c280 irq 508
> >>>  [   22.652562] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> >>>  [   22.653166] ata1.00: ATA-7: ST3250410AS, 3.AAF, max UDMA/133
> >>>  [   22.653171] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth
> >>>  0/32)
> >>>  [   22.653885] ata1.00: configured for UDMA/133
> >>>  /*** End transcript  ***/
> >> Ubuntu has detected the disks as IDE (P-ATA). If Linux does see a 
> >> S-ATA disk, it would be sda (aka SCSI disk).
> 
> It should work as IDE (compatible mode) and as SATA(AHCI).
> 
> Can you tell us about the chipset? Is it an intel oder nvidia?


I believe the chipset is Nvidia. Here is the output of "lspci -v" on
Ubuntu running on the same system:

/*** Begin output of lspci -v ***/
00:03.0 ISA bridge: nVidia Corporation Unknown device 07d7 (rev a2)
    Subsystem: Acer Incorporated [ALI] Unknown device 0137
    Flags: bus master, 66MHz, fast devsel, latency 0
    I/O ports at 4f00 [size=256]

00:03.1 SMBus: nVidia Corporation Unknown device 07d8 (rev a1)
    Subsystem: Acer Incorporated [ALI] Unknown device 0137
    Flags: 66MHz, fast devsel, IRQ 11
    I/O ports at 4900 [size=64]
    I/O ports at 4d00 [size=64]
    I/O ports at 4e00 [size=64]
    Capabilities: <access denied>

00:08.0 IDE interface: nVidia Corporation Unknown device 056c (rev a1)
(prog-if 8a [Master SecP PriP])
    Subsystem: Unknown device f025:0137
    Flags: bus master, 66MHz, fast devsel, latency 0
    [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled]
[size=8]
    [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled]
[size=1]
    [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled]
[size=8]
    [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled]
[size=1]
    I/O ports at ffa0 [size=16]
    Capabilities: <access denied>


00:0a.0 PCI bridge: nVidia Corporation Unknown device 056d (rev a1)
(prog-if 01 [Subtractive decode])
    Flags: bus master, 66MHz, fast devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
    I/O behind bridge: 0000e000-0000efff
    Memory behind bridge: feb00000-febfffff
    Capabilities: <access denied>

00:0b.0 PCI bridge: nVidia Corporation Unknown device 056e (rev a1)
(prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    Capabilities: <access denied>

00:0c.0 PCI bridge: nVidia Corporation Unknown device 056f (rev a1)
(prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    Capabilities: <access denied>

00:0d.0 PCI bridge: nVidia Corporation Unknown device 056f (rev a1)
(prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    Capabilities: <access denied>

00:0e.0 RAID bus controller: nVidia Corporation Unknown device 07f8 (rev
a2) (prog-if 85)
    Subsystem: Acer Incorporated [ALI] Unknown device 0137
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 508
    I/O ports at d480 [size=8]
    I/O ports at d400 [size=4]
    I/O ports at d080 [size=8]
    I/O ports at d000 [size=4]
    I/O ports at cc00 [size=16]
    Memory at fea7c000 (32-bit, non-prefetchable) [size=8K]
    Capabilities: <access denied>
/*** End output of lspci -v ***/

Unfortunately, of the above entries I wasn't able to tell what the
specific chipset of the SATA controller is.

Other than "lspci -v" and "dmesg", I not sure how to find the chipset
name under Linux.

Thanks for taking the time to help.

regards,
joseph

<snip>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080817174513.A28603>