Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 1 Dec 2012 01:53:03 +0900
From:      "Daisuke Aoyama" <aoyama@peach.ne.jp>
To:        "Oleksandr Tymoshenko" <gonzo@bluezbox.com>, "Mats Mellstrand" <mats@exmandato.se>
Cc:        freebsd-arm@freebsd.org
Subject:   Re: FreeBSD on Raspberry Pi 512MB (with U-Boot + ubldr)
Message-ID:  <C956325DD85D4E1E9739709F94FEEA76@ad.peach.ne.jp>
In-Reply-To: <D0C85770-572C-492D-82A4-7CB19F114F01@bluezbox.com>
References:  <3988C1622A974F19A9D3888F0334FF10@ad.peach.ne.jp> <EDA5788A-A74B-47A5-88C7-4CAD9B572EE2@exmandato.se> <D0C85770-572C-492D-82A4-7CB19F114F01@bluezbox.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi,

>> uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
>> mmcsd0: 14GB <SDHC SD16G 8.0 SN 53686086 MFG 08/2012 by 3 SD> at mmc0 
>> 25.0MHz/4bit/65535-block
>> mmcsd0: Error indicated: 2 Bad CRC
>> mmcsd0: Error indicated: 2 Bad CRC
>
> This issue must be fixed by r243688 and r243689

It seems fixed. But found another problem. SWAP never used even if I set 
GPU=384MB.
Also, around freemem=260MB(GPU=16MB), get the program crashed.


I've recreated the image based on build-pi-image.sh + SVN 243703 + my custom 
settings.
All settings are the same as previous mail. (FreeBSD source tree is not 
modified)
Please try this instead.

You can try my test version from:
http://www.peach.ne.jp/archives/rpi/freebsd-pi-20121201.img.gz

SHA256 (freebsd-pi-20121130.img.gz) = 
a4159301e2d7564ef065aa4c3d6afaef3284cc3ace1ae7c146aaea9e18ec0457
SHA256 (freebsd-pi-20121201.img.gz) = 
7a0b8bcda7f70c39b259811c12854fcf856af7e18436e9beb0c2fa25a7fdb0e0

Using config is here:
http://www.peach.ne.jp/archives/rpi/config/RPI-B-test3

-- 
Daisuke Aoyama 




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C956325DD85D4E1E9739709F94FEEA76>