Date: Wed, 4 Jul 2001 04:17:55 +0100 From: James Greenhalgh <james-list@ntlworld.com> To: "Hartmann, O." <ohartman@klima.physik.uni-mainz.de> Cc: freebsd-stable@freebsd.org, freebsd-questions@freebsd.org Subject: Re: HELP! Server crashes since last cvsupdate! Message-ID: <20010704041755.583fb511.james-list@ntlworld.com> In-Reply-To: <Pine.BSF.4.33.0107021049580.7438-100000@klima.physik.uni-mainz.de> References: <Pine.BSF.4.33.0107021049580.7438-100000@klima.physik.uni-mainz.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 2 Jul 2001 10:54:43 +0200 (CEST)
"Hartmann, O." <ohartman@klima.physik.uni-mainz.de> wrote:
> Hello.
>
> Since our last update Friday, 29th June, both SMP machines run
> into a "stuck" condition after a while. This happened now two times
> and I do not know what happens.
>
> The machines do not respond on console inputs, keyboards seem
> to be dead. Over network, accessing the machines via ssh or telnet
> results in a short message, then they hung after typing passowrd (ssh) or
> trying to connect (telnet). Both machines have NFS running.
> A third server attached to the same network node (behind a switch), an UP
> machine, is still alive (acts also as a NFS server) and fully accessible.
>
> What's up with FreeBSD 4.2-STABLE? Has something important been changed in
networking?Oliver
Perhaps it's something else. My desktop machine (rebuilt yesterday and again
tonight) is starting to hang in general use almost randomly. It was solid as
a rock before this point, running a 4.3-stable from early last month. I had
thought it was linux emu support or DRI causing it, but having eliminated both
of those it proceeded to do it again in console mode. My nonupgraded remote
server, similar hardware config but left at a month old setup is still happy.
Again an SMP machine, here's the dmesg:
-------
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #0: Wed Jul 4 03:16:56 BST 2001
root@eclipse.bloodflowers.org:/usr/obj/usr/src/sys/ECLIPSE
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (397.95-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 268369920 (262080K bytes)
config> di pcic0
No such device: pcic0
Invalid command or syntax. Type `?' for help.
config> di sn0
No such device: sn0
Invalid command or syntax. Type `?' for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax. Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax. Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di cs0
No such device: cs0
Invalid command or syntax. Type `?' for help.
config> di bt0
No such device: bt0
Invalid command or syntax. Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> en ed0
config> po ed0 0x300
config> ir ed0 10
config> iom ed0 0xd8000
config> f ed0 0
config> q
avail memory = 257310720 (251280K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
IOAPIC #0 intpin 16 -> irq 11
IOAPIC #0 intpin 17 -> irq 3
IOAPIC #0 intpin 18 -> irq 4
IOAPIC #0 intpin 19 -> irq 7
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc03ec000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03ec09c.
Preloaded elf module "agp.ko" at 0xc03ec0ec.
ccd0-3: Concatenated disk drivers
VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc036c977 (1000117)
VESA: 3dfx Interactive, Inc.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff at
device 0.0 on pci0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <3Dfx Voodoo 3 graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd000-0xd01f irq 7 at
device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0x5000-0x500f irq 9
at device 7.3 on pci0
intpm0: I/O mapped 5000
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
intpm0: PM I/O mapped 4000
amr0: <AMI MegaRAID> port 0xd400-0xd47f irq 3 at device 9.0 on pci0
amr0: <Series 428> Firmware C.80, BIOS 1.51, 4MB RAM
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd800-0xd83f mem
0xed000000-0xed01ffff,0xed023000-0xed023fff irq 4 at device 10.0 on pci0
fxp0: Ethernet address 00:02:b3:2e:57:18
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bktr0: <BrookTree 878> mem 0xed020000-0xed020fff irq 7 at device 11.0 on pci0
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
smbus1: <System Management Bus> on bti2c0
bktr0: Hauppauge Model 44354 A321
bktr0: Detected a MSP3415D-B3 at 0x80
bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo,
remote control.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 11.1 irq 7
ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0xdc00-0xdcff mem
0xed022000-0xed022fff irq 11 at device 12.0 on pci0
aic7895C: Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec aic7895 Ultra SCSI adapter> port 0xe000-0xe0ff mem
0xed024000-0xed024fff irq 11 at device 12.1 on pci0
ahc1: Using left over BIOS settings
aic7895C: Wide Channel B, SCSI Id=7, 32/255 SCBs
isa0: too many dependant configs (8)
isa0: unexpected small tag 14
orm0: <Option ROMs> at iomem 0xc0000-0xc9fff,0xcd000-0xd17ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
ppc0: parallel port not found.
ed0 at port 0x300-0x31f iomem 0xd8000 irq 10 drq 0 on isa0
ed0: address 00:c0:f0:1c:11:70, type NE2000 (16 bit)
pca0 at port 0x40 on isa0
sbc0: <Creative SB AWE64> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5
drq 1,5 on isa0
pcm0: <SB16 DSP 4.16> on sbc0
joy0: <Generic PnP Joystick> at port 0x200-0x207 on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled, default to accept, logging limited to 10 packets/entry by default
SMP: AP CPU #1 Launched!
ad0: 2445MB <QUANTUM SIROCCO2550A> [4969/16/63] at ata0-master WDMA2
ad1: 6149MB <ST36450A> [13328/15/63] at ata0-slave WDMA2
acd0: CD-RW <CR-4802TE> at ata1-master using PIO3
Waiting 15 seconds for SCSI devices to settle
amrd0: <MegaRAID logical drive> on amr0
amrd0: 255MB (522240 sectors) RAID 0 (optimal)
amrd1: <MegaRAID logical drive> on amr0
amrd1: 8526MB (17461248 sectors) RAID 5 (optimal)
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <FUJITSU MAE3091LP 0112> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da0: 8704MB (17826240 512 byte sectors: 255H 63S/T 1109C)
WARNING: / was not properly dismounted
(then warnings and normal startup, of course...)
--
find great crazy-mad out-of-head experience from japan.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010704041755.583fb511.james-list>