Date: Fri, 26 Dec 1997 13:37:58 -0500 (EST) From: Dennis Tenn <dstenn@fanfic.org> To: Nino Udovicic <max_brod@yahoo.com> Cc: freebsd-multimedia@freebsd.org Subject: Re: Pnp support Message-ID: <Pine.BSF.3.96.971226133306.13311B-100000@fanfic.org> In-Reply-To: <19971226175411.17019.rocketmail@send1b.yahoomail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 26 Dec 1997, Nino Udovicic wrote:
> I am having trouble installing PnP soundblaster soundcard. The thing
> is, i have succeded is patching the kernel with the PNP patch provided
> under xperiments. And it worked. This is the pnp.c configration. (read
> on)
>
> /* Configuration for the SoundBlaster 16 PnP */
> {
> 0x10073b56, /* Serial Number */
> -1, /* Logical Device Number */
> {
> { 5, -1 }, /* Primary IRQ Number, Type */
> { -1, -1 } /* Second IRQ Number, Type */
> },
> { 5, -1 }, /* DRQ Number */
> {
> 0x220, /* Ports 1 */
> 0x330, /* Ports 2 */
> 0x388, /* Ports 3 */
> -1, /* Ports 4 */
> -1, /* Ports 5 */
> -1, /* Ports 6 */
> -1, /* Ports 7 */
> -1, /* Ports 8 */
> },
> {
> { -1, -1, -1 }, /* Memory desc0 - base, ctrl, range */
> { -1, -1, -1 }, /* Memory desc1 - base, ctrl, range */
> { -1, -1, -1 }, /* Memory desc2 - base, ctrl, range */
> { -1, -1, -1 } /* Memory desc3 - base, ctrl, range */
> }
> }
>
> And the output the kernel gives at the beginning is:
>
> Board Vendor ID: CTL002b Board Serial Number: 10073b56
> Configuring (Logical Device 0)
>
> As it became apparent to me this was not enough, the standard devices
> in the kernel config file still have to be configured. What my
> question basicaly is: what to do o have to set the
>
> controller snd0
> device sb0 at isa? port 0x220 irq 7 conflicts drq 1
> vector sbintr
> device sbxvi0 at isa? drq 5
> device sbmidi0 at isa? port 0x330
> device opl0 at isa? port 0x388
>
> lines for my card to work if the pnpinfo gives me this:
>
> Checking for Plug-n-Play devices...
> Trying Read_Port at 203
> Card assigned CSN #1
> Board Vendor ID: CTL002b
> Board Serial Number: 10073b56
> PnP Version: 1.0
> Vendor Version: 32
> Device Description: Creative SB16 PnP
> Logical Device ID: CTL0031 (31008c0e)
> Device Description: Audio
> Start Dependent Function
> Good Configuration
> IRQ: 5
> DMA: 0 1
> DMA: 8-bit only
> DMA: Device is not a bus master
> DMA: May execute in count by byte mode
> DMA: May not execute in count by word mode
> DMA: Compatibility mode
> DMA: 5
> DMA: 16-bit only
> DMA: Device is not a bus master
> DMA: May not execute in count by byte mode
> DMA: May execute in count by word mode
> DMA: Compatibility mode
> Device decodes the full 16-bit ISA address
> I/O Range maximum address: 0x220
> I/O Range maximum address: 0x220
> I/O alignment for minimum: 1
> I/O length: 16
> Device decodes the full 16-bit ISA address
> I/O Range maximum address: 0x330
> I/O Range maximum address: 0x330
> I/O alignment for minimum: 1
> I/O length: 2
> Device decodes the full 16-bit ISA address
> I/O Range maximum address: 0x388
> I/O Range maximum address: 0x388
> I/O alignment for minimum: 1
> I/O length: 4
>
> I have tried a number of configurations nad not one of them worked.
> The best i got is the midi working every time. Even when i get the
> message that all the devices (sb0, sbxvi0, opl0, sbmidi0) are
> configured midi works, but programs envolving some other format just
> dont give output (some of them crash saying:
> DMA timed out - IRQ/DRQ config error?
>
> I know what this should mean but i tried so many different settings.
> If it helps i can change the card resource settings using a program
> under dos.
> And, yes, the card worked fine on other OS's.
> Thank you in advance.
Try this.. When you reboot your computer, at the boot: prompt type -c and
enter the kernel config mode. Then type the following:
pnp 1 0 os enable port0 0x220 irq0 7 drq0 1 drq1 5
pnp 1 1 os enable port0 0x330
pnp 1 2 os enable port0 0x388
quit
Then see what happens.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Dennis Tenn * There will always come a time
dstenn@fanfic.org * When your love will be tested
* Stand tall and rise to the occasion
* For only then will you grow strong.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.971226133306.13311B-100000>