From owner-freebsd-hackers Tue Jan 24 05:19:42 1995 Return-Path: hackers-owner Received: (from root@localhost) by freefall.cdrom.com (8.6.9/8.6.6) id FAA00970 for hackers-outgoing; Tue, 24 Jan 1995 05:19:42 -0800 Received: from dg-rtp.dg.com (dg-rtp.rtp.dg.com [128.222.1.2]) by freefall.cdrom.com (8.6.9/8.6.6) with SMTP id FAA00964 for ; Tue, 24 Jan 1995 05:19:40 -0800 Received: by dg-rtp.dg.com (5.4R2.01/dg-rtp-v02) id AA02850; Tue, 24 Jan 1995 08:18:59 -0500 Received: (rivers@localhost) by ponds.UUCP (8.6.9/8.6.5) id GAA11152; Tue, 24 Jan 1995 06:03:15 -0500 Date: Tue, 24 Jan 1995 06:03:15 -0500 From: Thomas David Rivers Message-Id: <199501241103.GAA11152@ponds.UUCP> To: freebsd-hackers@freefall.cdrom.com, jkh@time.cdrom.com Subject: 3c509 probs... Sender: hackers-owner@FreeBSD.org Precedence: bulk Jordan - I discovered this while trying to catch up on 1800+ pieces of mail (I've been busy with work lately.) Anyway, I find that with my 3c509 at work - if I boot DOS/Windows, then reboot into FreeBSD, FreeBSD does not recognize the 3c509. If I physically turn the machine off, FreeBSD does recognize the 3c509. Thus, I think there is possibly a probe problem here... - Dave Rivers - (p.s. this is with FreeBSD 2.0R, using the OS/2 boot manager to bounce between FreeBSD, OS/2, DOS/Windows.) > > Jordan, > We've been missing each other's telephone calls. This is in > regard to a problem that I'm having at work, with the current re- > lease of BSD from Walnut Creek. The probe only occasionally rec- > ognizes my 3C509-16-TP card. Even when it finds the board, it > never works properly. > > The port light on my hub never lights during the BSD boot. > When the probe has been successful finding the board, I've con- > figured the device with ifconfig and pinged another box on the > LAN. This causes the hub port light to blink. Afterwards, ping > fails, and the light stays off. > > I've used "/kernel -c" during boot to disable all devices > except my console, harddrive, and ethernet board. I had the same > results, except that the board was found consistently. > > I've swapped boards, cables, and ports. Used different base > addresses and interrupts. My LAN consists of two other boxes > running Linux with 3C509-16-TP cards. One is a router using two > 509 cards. The two Linux machines perform perfectly. > > The board is set to use base address 0x300, and interrupt > 10. > > The ethernet connection is vital to a project that I am > working on. I need to build a box that will analyze MPEG data > being transported across tcp LANS. I plan to build my software > on top of Tcpdump and BSD to do this. > > I would appreciate any help. Thank you. > > - Bill > -- > _________________________________ > Bill Smith > bill%saco@telesciences.com > twwells!telesci!saco!bill > >