Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 22 May 2003 01:10:12 -0400
From:      Dexter McNeil <dexter@backtech.com>
To:        freebsd-current@freebsd.org
Subject:   IBM Netfinity 5500 M20 and FreeBSD 5.1-BETA2  - crash on install
Message-ID:  <20030522051012.GA90928@net-1.backtech.com>

next in thread | raw e-mail | index | archive | help
Hi,
	I'm running into the following when attempting to install the most
recent BETA .iso (downloaded last night) on an IBM Netfinity 5500 M20 box
with the following hardware:

	4 x 550MHz P-III Xeon
	2GB Ram
	AMD 79CXXX ethernet adapter on motherboard
	IBM ServeRAID 2 on motherboard - no disks attached at the moment bios
	version 4.70.17
	Intel 82559 100B/T ether in PCI slot
	Adaptec 2940UW with bios v1.34.3 w/ 6 x 18G drives attached
	Machine's BIOS set to factory defaults.

	This machine boots & runs FreeBSD 4.8 just fine. It also boots from
CDROM & installs & boots & runs FreeBSD 5.0 from CDROM. After the
announcement by Scott Long on the scsi list that the ServeRAID drivers had
been made available, I thougth I'd try to pound on them a little bit. I
work for a shop that uses quite a bit of IBM Netfinity boxen and they like
FreeBSD. Below is a screen dump (transcribed by hand - forgive the typos)
of the boot off a 5.1BETA2 CDROM. If there is anything else that I can
extract out of this, let me know.

Thanks again for a great OS!

Dexter McNeil
dexter@backtech.com


FreeBSD/i386 bootstrap loader, Revision 1.1
(root@wv1u.btc.adaptec.com, Tue May 20 14:07:42 GMT 2003)
Loading /boot/defaults/loader.conf
/boot/kernel/kernel text=0x41eb3c data=0x7753c+0x7dc98
syms=[0x4+0x55a70+0x4+0x64c30]
-
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
/boot/kernel/acpi.ko text=0x39b20 data=0x1638+0xf68
syms=[0x4+0x5990+0x4+0x75d9/]
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-BETA2 #0: Tue May 20 16:08:27 GMT 2003
	root@wv1u.btc.adaptec.com:/usr/obj/user/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b53000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0b5321c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b53260.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 547585316 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (547.59-MHz 686-class CPU)
	Origin = "GenuineIntel" Id = 0x673 Stepping = 3

Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 2147463168 (2047 MB)
avail memory = 2078240768 (1981 MB)
Pentium Pro MTRR support enabled
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc06cf3bc
nxp0: <math processor> on motherboard
nxp0: INT 16 interface
acpi0: <IBM SERKQUAD> on motherboard
pcibios: BIOS version 2.10
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 35979545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfd08-0xfd0b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu2: <CPU> on acpi0
acpi_cpu3: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff onacpi0
pci0: <ACPI PCI bus> on pcib0
ips0: <IBM ServeRAID Adapter> port 0x2000-0x20ff mem 0xfebfe000-0xfebfffff
irq11 at device 3.0 on pci0
ips0: reinitializing adapter, this could take several minutes.
ips0: failed to get configuration data from device
device_probe_and_attach: ips0 attach returned 6
pcn0: Ethernet address: 00:06:29:38:cf:c1
miibus0: <MII bus> on pcn0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <display, VGA> at device 15.0 (no driver attached)
Memory modified after free 0xc7ef5800(252)
panic: Most recently used by devbuf

Debugger("panic")
Stopped at	Debugger+0x54:	xchgl	%ebx,in_Debugger.0
db>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030522051012.GA90928>