Date: Sun, 7 Jan 1996 11:27:08 -0800 (PST) From: "Justin T. Gibbs" <gibbs> To: CVS-committers, cvs-sys Subject: cvs commit: src/sys/scsi scsiconf.h Message-ID: <199601071927.LAA05001@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
gibbs 96/01/07 11:27:07
Modified: sys/dev/aic7xxx aic7xxx.seq aic7xxx_reg.h
Log:
aic7xxx.seq:
Add the same type of safeguards we use in the mesg_in phase to the mesg_out
phase.
aic7xxx_reg.h:
Add definitions for the DSCommand register for PCI adapters.
Revision Changes Path
1.27 +10 -9 src/sys/dev/aic7xxx/aic7xxx.seq
1.3 +11 -1 src/sys/dev/aic7xxx/aic7xxx_reg.h
Modified: sys/i386/conf GENERIC
Log:
Add comment about only needing on of either ahc, ncr, or ahb type
controllers to handle any number of devices.
Remove unnecessary extra units for these controllers.
Revision Changes Path
1.59 +3 -2 src/sys/i386/conf/GENERIC
Modified: sys/i386/eisa aha1742.c
Log:
Use the new adapter_softc field in the scsi_link structure so that
this driver no longer needs to maintain an array of configured units.
Pass "softc" pointers instead of unit numbers to many functions that
did a conversion for unit->softc anyway.
Revision Changes Path
1.47 +66 -79 src/sys/i386/eisa/aha1742.c
Modified: sys/i386/isa aha1542.c aic6360.c ncr5380.c seagate.c
ultra14f.c
Log:
Use the new adapter_softc field in the scsi_link structure so that
in the future, these drivers won't need to maintain an array of
configured units. They still need to because ISA interrupt handlers
take a unit number. :(
Pass "softc" pointers instead of unit numbers to many functions that
did a conversion of unit->softc anyway.
Revision Changes Path
1.55 +89 -89 src/sys/i386/isa/aha1542.c
1.19 +12 -12 src/sys/i386/isa/aic6360.c
1.10 +3 -2 src/sys/i386/isa/ncr5380.c
1.16 +14 -11 src/sys/i386/isa/seagate.c
1.44 +106 -110 src/sys/i386/isa/ultra14f.c
Modified: sys/i386/scsi aic7xxx.c aic7xxx.h bt.c
Log:
Use the new adapter_softc field in the scsi_link structure so that
these drivers don't need to maintain an array of configured units.
The bt driver still needs to because ISA interrupt handlers take a
unit number. :(
Revision Changes Path
1.53 +14 -33 src/sys/i386/scsi/aic7xxx.c
1.18 +1 -3 src/sys/i386/scsi/aic7xxx.h
1.4 +6 -6 src/sys/i386/scsi/bt.c
Modified: sys/pci aic7870.c ncr.c
Log:
Write the cahesize and latency timer values back into configuration
space (whoops!).
Add a missing argument to the cachesize/lattime printf.
Set the CACHETHEN bit in DSCommand.
Revision Changes Path
1.22 +6 -1 src/sys/pci/aic7870.c
1.54 +4 -11 src/sys/pci/ncr.c
Modified: sys/scsi scsiconf.h
Log:
Add an adapter_softc field to the scsi_link struct.
Revision Changes Path
1.37 +2 -1 src/sys/scsi/scsiconf.h
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199601071927.LAA05001>