Date: Wed, 14 Jan 2004 16:06:25 +0100 From: Regis GRAF <regis@bsdlibre.net> To: sos@deepcore.dk Cc: freebsd-current@FreeBSD.ORG Subject: Re: ata problem with 5.2-RELEASE Message-ID: <1074092785.40055af10d098@mail.bsdlibre.net> In-Reply-To: <200401141433.i0EEXwhn020669@spider.deepcore.dk> References: <200401141433.i0EEXwhn020669@spider.deepcore.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
Selon sos@deepcore.dk: > It seems Regis GRAF wrote: > > > > Jan 13 20:45:35 tiny kernel: ad0: FAILURE - WRITE_DMA > > > status=51<READY,DSC,ERROR> > > > > error=84<ICRC,ABORTED> LBA=79763263 > > > > > > > The 5.1p11 never issue a message concerning problem with cable or write > error. I > > never had read error. > > The controler is an add-on card on this machine. The cable does normally > support > > ata133 (I'll verify this tonight) and the whome worked perfectly (with > UDMA133) > > on 5.1p11. > > There hasn't been any timing changes other than we are now using the memio > interface (which might cause requests to be issued faster).. > > -Søren > is there anything I can do ? I use atacontrol after every reboot, which is not the best solution :) I modified the file ata_chipset.c, changing UDMA6 to UDMA5 for SiL0680... I hope it solved the problem for the moment... ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1074092785.40055af10d098>