Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 06 Sep 2005 14:31:56 -0400
From:      Mike Tancsa <mike@sentex.net>
To:        freebsd-stable@freebsd.org
Subject:   LOR on BETA3
Message-ID:  <6.2.3.4.0.20050906143013.08041df0@64.7.153.2>

next in thread | raw e-mail | index | archive | help
Both times I tried to install Beta3 on the box below and got panics and LORs

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA3 #0: Mon Aug 22 22:59:46 UTC 2005
     root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 2.40GHz (2400.41-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf34  Stepping = 4
   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,<b14>>
real memory  = 267321344 (254 MB)
avail memory = 251949056 (240 MB)
ACPI APIC Table: <AOpen  AWRDACPI>
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AOpen AWRDACPI> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 12 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 7 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 5 on acpi0
pci_link6: <ACPI PCI Link LNK0> irq 10 on acpi0
pci_link7: <ACPI PCI Link LNK1> irq 0 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82865G (865G GMCH) SVGA controller> port 0xe400-0xe407 
mem 0xf0000000-0xf7ffffff,0xf8500000-0xf857ffff irq 16 at device 2.0 on pci0
agp0: detected 892k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xe000-0xe01f 
irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xe100-0xe11f 
irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xe200-0xe21f 
irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xe300-0xe31f 
irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xd000-0xd03f 
mem 0xf8411000-0xf8411fff irq 20 at device 8.0 on pci1
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:01:80:5f:32:e3
pci1: <simple comms, UART> at device 9.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xd200-0xd2ff mem 
0xf8410000-0xf84100ff irq 22 at device 10.0 on pci1
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus1
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:0e:2e:1f:b1:ff
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <Generic IRDA-compatible device> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc9fff,0xcc000-0xcd7ff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2400410538 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38166MB <Seagate ST340014A 8.54> at ata0-master UDMA100
acd0: CDROM <CD-ROM 48X/AKU/T31> at ata1-master PIO4
Trying to mount root from ufs:/dev/ad0s1a
WARNING:  was not properly dismounted
WARNING:  was not properly dismounted
WARNING:  was not properly dismounted
WARNING:  was not properly dismounted
: mount pending error: blocks 0 files 1
fxp0: link state changed to DOWN
rl0: link state changed to DOWN
fxp0: link state changed to UP
lock order reversal
  1st 0xc097ca00 UMA lock (UMA lock) @ /usr/src/sys/vm/uma_core.c:1494
  2nd 0xc1060144 system map (system map) @ /usr/src/sys/vm/vm_map.c:2317
KDB: stack backtrace:
kdb_backtrace(0,ffffffff,c0931ab8,c0931bf8,c08bc1c4) at kdb_backtrace+0x29
witness_checkorder(c1060144,9,c087273f,90d) at witness_checkorder+0x564
_mtx_lock_flags(c1060144,0,c087273f,90d) at _mtx_lock_flags+0x5b
_vm_map_lock(c10600c0,c087273f,90d) at _vm_map_lock+0x26
vm_map_remove(c10600c0,c1d6c000,c1d6d000,cc9aac0c,c077fba9) at 
vm_map_remove+0x1f
kmem_free(c10600c0,c1d6c000,1000,cc9aac3c,c077f556) at kmem_free+0x25
page_free(c1d6c000,1000,2) at page_free+0x29
zone_drain(c103f1e0) at zone_drain+0x26a
zone_foreach(c077f2ec,cc9aacec,c07914d7,cc9aac74,246) at zone_foreach+0x37
uma_reclaim(cc9aac74,246,0,cc9aac80,c062a4f5) at uma_reclaim+0x12
vm_pageout_scan(0,c097ce60,0,c0873c2c,604) at vm_pageout_scan+0x103
vm_pageout(0,cc9aad38,0,c079232c,0) at vm_pageout+0x2c3
fork_exit(c079232c,0,cc9aad38) at fork_exit+0xa0
fork_trampoline() at fork_trampoline+0x8
--- trap 0x1, eip = 0, esp = 0xcc9aad6c, ebp = 0 ---





--------------------------------------------------------------------
Mike Tancsa,                                      tel +1 519 651 3400
Sentex Communications,                            mike@sentex.net
Providing Internet since 1994                    www.sentex.net
Cambridge, Ontario Canada                         www.sentex.net/mike




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.2.3.4.0.20050906143013.08041df0>