Date: Tue, 04 Feb 2003 00:15:22 +0000 From: =?ISO-8859-1?Q?S=F8ren_Vrist?= <inbox@seet.dk> To: freebsd-mobile@freebsd.org Subject: Slow laptop after waking from sleep Message-ID: <3E3F061A.90007@seet.dk>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------010609060908010207040500 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable Im running: # uname -a FreeBSD laptop.seet.dk 5.0-RELEASE FreeBSD 5.0-RELEASE #0: Tue Jan 28=20 17:41:13 GMT 2003 root@laptop.seet.dk:/usr/obj/usr/src/sys/LAPTOP50=20 i386 I close the lid and the laptop sleeps. When i open the lid (the samething happens with the fn-zzzz button too,=20 and with acpiconf -s x) this happens: wakeup from sleeping state (slept 02:33:46) ata0: resetting devices .. ACPI-0169: *** Error: Could not acquire interpreter mutex ACPI-0949: *** Error: AE_TIME while evaluating GPE1b method ACPI-0169: *** Error: Could not acquire interpreter mutex ad0: DMA limited to UDMA33, non-ATA66 cable or device And the laptop is reeeeaaaaallly laggy after this.. I also got this suspicius thing in dmesg: ACPI-1287: *** Error: Method execution failed, AE_AML_UNINITIALIZED_ELEME= NT (I attatched a whole dmesg) Kind Regards S=F8ren Vrist --------------010609060908010207040500 Content-Type: text/plain; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg" Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-RELEASE #0: Tue Jan 28 17:41:13 GMT 2003 root@laptop.seet.dk:/usr/obj/usr/src/sys/LAPTOP50 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0722000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07220a8. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 1129573249 Hz CPU: Pentium III/Pentium III Xeon/Celeron (1129.57-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 394170368 (375 MB) avail memory = 375230464 (357 MB) Initializing GEOMetry subsystem Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <ASUS L1400B > on motherboard ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31 Using $PIR table, 6 entries at 0xc00f1b50 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_acad0: <AC adapter> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82830 (i830M GMCH) SVGA controller> mem 0xe7800000-0xe787ffff,0xf0000000-0xf7ffffff irq 10 at device 2.0 on pci0 agp0: detected 8060k stolen memory agp0: aperture size is 128M pci0: <display> at device 2.1 (no driver attached) uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xd800-0xd81f irq 10 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0xd400-0xd41f irq 9 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib1 rl0: <RealTek 8139 10/100BaseTX> port 0xc800-0xc8ff mem 0xe6800000-0xe68000ff irq 9 at device 3.0 on pci1 rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode rl0: Ethernet address: 00:e0:18:93:81:4a miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto cbb0: <RF5C475 PCI-CardBus Bridge> irq 10 at device 5.0 on pci1 start (88000000) < sc->membase (e3800000) end (ffffffff) > sc->memlimit (e6ffffff) cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pci1: <serial bus, FireWire> at device 6.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0xa400-0xa40f,0xa800-0xa803,0xb000-0xb007,0xb400-0xb403,0xb800-0xb807 mem 0xe3000000-0xe30003ff irq 9 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pcm0: <Intel 82801CA (ICH3)> port 0xe100-0xe13f,0xe000-0xe0ff irq 4 at device 31.5 on pci0 pci0: <simple comms> at device 31.6 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 fdc0: cannot reserve I/O port range (6 ports) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec IPsec: Initialized Security Association Processing. acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5% system power profile changed to 'economy' ACPI-1287: *** Error: Method execution failed, AE_AML_UNINITIALIZED_ELEMENT start (88000000) < sc->membase (e3800000) end (ffffffff) > sc->memlimit (e6ffffff) start (88000000) < sc->membase (e3800000) end (ffffffff) > sc->memlimit (e6ffffff) wi0: <Netgear MA401RA> at port 0x100-0x13f irq 10 function 0 config 1 on pccard0 wi0: 802.11 address: 00:09:5b:27:f6:b1 wi0: using RF:PRISM2.5 MAC:ISL3873 wi0: Intersil Firmware: Primary 1.00.07, Station 1.03.06 ad0: 38154MB <IC25N040ATCS04-0> [77520/16/63] at ata0-master UDMA100 acd0: CD-RW <TOSHIBA DVD-ROM SD-R2102> at ata0-slave PIO4 MBREXT Slice 5 on ad0s4: 0000 00 fe ff ff 83 fe ff ff 3f 00 00 00 10 ad 03 00 |........?.......| [0] f:00 typ:131 s(CHS):255/254/255 e(CHS):255/254/255 s:63 l:240912 0000 00 fe ff ff 05 fe ff ff 4f ad 03 00 24 d3 08 00 |........O...$...| [1] f:00 typ:5 s(CHS):255/254/255 e(CHS):255/254/255 s:240975 l:578340 MBREXT Slice 6 on ad0s4: 0000 00 fe ff ff 82 fe ff ff 3f 00 00 00 e5 d2 08 00 |........?.......| [0] f:00 typ:130 s(CHS):255/254/255 e(CHS):255/254/255 s:63 l:578277 0000 00 fe ff ff 05 fe ff ff 73 80 0c 00 5e ae f2 00 |........s...^...| [1] f:00 typ:5 s(CHS):255/254/255 e(CHS):255/254/255 s:819315 l:15904350 MBREXT Slice 7 on ad0s4: 0000 00 fe ff ff 83 fe ff ff 3f 00 00 00 1f ae f2 00 |........?.......| [0] f:00 typ:131 s(CHS):255/254/255 e(CHS):255/254/255 s:63 l:15904287 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 Mounting root from ufs:/dev/ad0s2a acpi_tz0: WARNING - current temperature (33.0C) exceeds system limits WARNING: pseudo-random number generator used for IPsec processing system power profile changed to 'performance' system power profile changed to 'economy' wi0: detached wakeup from sleeping state (slept 02:33:46) ata0: resetting devices .. ACPI-0169: *** Error: Could not acquire interpreter mutex ACPI-0949: *** Error: AE_TIME while evaluating GPE1b method ACPI-0169: *** Error: Could not acquire interpreter mutex ad0: DMA limited to UDMA33, non-ATA66 cable or device done ata1: resetting devices .. done start (88000000) < sc->membase (e3800000) end (ffffffff) > sc->memlimit (e6ffffff) start (88000000) < sc->membase (e3800000) end (ffffffff) > sc->memlimit (e6ffffff) wi0: <Netgear MA401RA> at port 0x100-0x13f irq 10 function 0 config 1 on pccard0 wi0: 802.11 address: 00:09:5b:27:f6:b1 wi0: using RF:PRISM2.5 MAC:ISL3873 wi0: Intersil Firmware: Primary 1.00.07, Station 1.03.06 --------------010609060908010207040500-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E3F061A.90007>