Date: Tue, 22 Feb 2011 14:27:09 +0100 From: Bernhard Schmidt <bschmidt@freebsd.org> To: Damien Fleuriot <ml@my.gd> Cc: freebsd-hackers@freebsd.org Subject: Re: LAGG - interface comes up but no laggports Message-ID: <201102221427.09817.bschmidt@freebsd.org> In-Reply-To: <4D63B77A.2060509@my.gd> References: <4D639E96.70902@my.gd> <201102221318.53376.bschmidt@freebsd.org> <4D63B77A.2060509@my.gd>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tuesday, February 22, 2011 14:17:46 Damien Fleuriot wrote: > On 2/22/11 1:18 PM, Bernhard Schmidt wrote: > > On Tuesday, February 22, 2011 12:31:34 Damien Fleuriot wrote: > >> rc.conf > >> --- > >> # LINK AGGREG > >> ifconfig_lagg0="laggproto failover laggport em0 laggport em1" > >> ipv4_addrs_lagg0="192.168.1.3/29" > >> ifconfig_lagg0="inet6 fe80::3/64" > > > > You are overwriting the variable, you have to use some alternative > > or move everything into one statement. > > Good call, it now works correctly: > lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 > mtu 9014 > options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> > ether 00:15:17:37:17:e6 > inet6 fe80::215:17ff:fe37:17e6%lagg0 prefixlen 64 scopeid 0x5 > inet 192.168.1.3 netmask 0xfffffff8 broadcast 192.168.1.7 > nd6 options=3<PERFORMNUD,ACCEPT_RTADV> > media: Ethernet autoselect > status: active > laggproto failover > laggport: em1 flags=0<> > laggport: em0 flags=5<MASTER,ACTIVE> > > > You'll notice that using ipv6_addrs didn't work, as the interface is > using an automatic address instead of fe80::3/64 which I tried to > set. > > I suppose I could use the crontab for this, @reboot ifconfig lagg0 > inet6 fe80::3/64 , or perhaps rc.local I'm using ipv6_ifconfig_XXX0[_aliasX] to assign IPv6 addresses, might be worth a try? I don't see ipv6_addrs_XXX0 to be even defined somewhere. -- Bernhard
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201102221427.09817.bschmidt>