From owner-freebsd-scsi@FreeBSD.ORG Tue May 4 18:00:11 2010 Return-Path: Delivered-To: freebsd-scsi@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 45D721065679 for ; Tue, 4 May 2010 18:00:11 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [69.147.83.40]) by mx1.freebsd.org (Postfix) with ESMTP id 0082F8FC0A for ; Tue, 4 May 2010 18:00:09 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id o44I08oU017512 for ; Tue, 4 May 2010 18:00:08 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id o44I08d4017511; Tue, 4 May 2010 18:00:08 GMT (envelope-from gnats) Date: Tue, 4 May 2010 18:00:08 GMT Message-Id: <201005041800.o44I08d4017511@freefall.freebsd.org> To: freebsd-scsi@FreeBSD.org From: Per olof Ljungmark Cc: Subject: Re: kern/146287: [ciss] ciss(4) cannot see more than one SmartArray controller X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Per olof Ljungmark List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 04 May 2010 18:00:11 -0000 The following reply was made to PR kern/146287; it has been noted by GNATS. From: Per olof Ljungmark To: bug-followup@FreeBSD.org, peo@intersonic.se Cc: seanbru@yahoo-inc.com Subject: Re: kern/146287: [ciss] ciss(4) cannot see more than one SmartArray controller Date: Tue, 04 May 2010 19:56:19 +0200 Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-RELEASE-p2 #0: Tue May 4 00:23:37 CEST 2010 peo@lowell.i.inter-sonic.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80e1a000. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3400136791 Hz CPU: Intel(R) Xeon(TM) CPU 3.40GHz (3400.14-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 Features=0xbfebfbff Features2=0x649d AMD Features=0x20000800 TSC: P-state invariant real memory = 12884901888 (12288 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000e51000 - 0x00000000dfff2fff, 3743031296 bytes (913826 pages) 0x0000000100000000 - 0x00000003049d6fff, 8667361280 bytes (2116055 pages) avail memory = 12349284352 (11777 MB) ACPI APIC Table: INTR: Adding local APIC 6 as a target FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 2 package(s) x 1 core(s) x 2 HTT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP/HT): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP/HT): APIC ID: 7 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 APIC: CPU 2 has ACPI ID 6 APIC: CPU 3 has ACPI ID 7 ULE: setup cpu 0 ULE: setup cpu 1 ULE: setup cpu 2 ULE: setup cpu 3 ACPI: RSDP 0xf4f00 00024 (v2 HP ) ACPI: XSDT 0xdfff3300 0004C (v1 HP P51 00000002 �\^D 0000162E) ACPI: FACP 0xdfff3380 000F4 (v3 HP P51 00000002 �\^D 0000162E) ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 20090521 tbfadt-707 ACPI: DSDT 0xdfff3480 02DAB (v1 HP DSDT 00000001 INTL 20030228) ACPI: FACS 0xdfff3100 00040 ACPI: SPCR 0xdfff3140 00050 (v1 HP SPCRRBSU 00000001 �\^D 0000162E) ACPI: MCFG 0xdfff31c0 0003C (v1 HP ProLiant 00000001 00000000) ACPI: APIC 0xdfff3200 000C2 (v1 HP 00000083 00000002 00000000) ACPI: SSDT 0xdfff8000 004C9 (v1 HP SSDTP 00000001 INTL 20030228) MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec80000 MADT: Found IO APIC ID 10, Interrupt 48 at 0xfec80400 MADT: Found IO APIC ID 11, Interrupt 72 at 0xfec84000 MADT: Found IO APIC ID 12, Interrupt 96 at 0xfec84400 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: edge lapic: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-47 on motherboard ioapic2 irqs 48-71 on motherboard ioapic3 irqs 72-95 on motherboard ioapic4 irqs 96-119 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000100f0 pcm: 0x00010400 wlan: <802.11 Link Layer> null: random: nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: io: hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 acpi0: on motherboard PCIe: Memory Mapped configuration base @ 0xe0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xffffff8000025000 pa 0x4000 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.CFG0.MEM0 -> bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.PTC0.PCXC.SHP0 -> bus 5 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.IBRG.ICH5 -> bus 0 dev 31 func 0 ACPI timer: 0/397 0/5 0/5 0/5 0/6 0/5 0/5 0/6 0/5 0/4 -> 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 5 7 10 11 Validation 0 5 N 0 5 7 10 11 After Disable 0 255 N 0 5 7 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 5 7 10 11 Validation 0 7 N 0 5 7 10 11 After Disable 0 255 N 0 5 7 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 5 7 10 11 Validation 0 7 N 0 5 7 10 11 After Disable 0 255 N 0 5 7 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 5 7 10 11 Validation 0 5 N 0 5 7 10 11 After Disable 0 255 N 0 5 7 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 7 10 11 Validation 0 255 N 0 5 7 10 11 After Disable 0 255 N 0 5 7 10 11 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 5 7 10 11 Validation 0 5 N 0 5 7 10 11 After Disable 0 255 N 0 5 7 10 11 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 5 7 10 11 Validation 0 5 N 0 5 7 10 11 After Disable 0 255 N 0 5 7 10 11 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 5 7 10 11 Validation 0 5 N 0 5 7 10 11 After Disable 0 255 N 0 5 7 10 11 pcib0: on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x3590, revid=0x0c domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3595, revid=0x0c domain=0, bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 2 messages found-> vendor=0x8086, dev=0x3599, revid=0x0c domain=0, bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 2 messages found-> vendor=0x8086, dev=0x24d2, revid=0x02 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[20]: type I/O Port, range 32, base 0x3000, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x24d4, revid=0x02 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type I/O Port, range 32, base 0x3020, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x24d7, revid=0x02 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=7 map[20]: type I/O Port, range 32, base 0x3040, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x24de, revid=0x02 domain=0, bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[20]: type I/O Port, range 32, base 0x3060, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x24dd, revid=0x02 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfbef0000, size 10, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 23 found-> vendor=0x8086, dev=0x244e, revid=0xc2 domain=0, bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24d0, revid=0x02 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x014f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24db, revid=0x02 domain=0, bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type I/O Port, range 32, base 0x500, size 4, enabled map[24]: type Memory, range 32, base 0, size 10, memory disabled pcib1: at device 2.0 on pci0 pcib1: domain 0 pcib1: secondary bus 2 pcib1: subordinate bus 4 pcib1: I/O decode 0x4000-0x4fff pcib1: memory decode 0xfdd00000-0xfdefffff pcib1: no prefetched decode pci2: on pcib1 pci2: domain=0, physical bus=2 found-> vendor=0x8086, dev=0x0329, revid=0x09 domain=0, bus=2, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit found-> vendor=0x8086, dev=0x032a, revid=0x09 domain=0, bus=2, slot=0, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit pcib2: at device 0.0 on pci2 pcib2: domain 0 pcib2: secondary bus 3 pcib2: subordinate bus 3 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xfdd00000-0xfddfffff pcib2: no prefetched decode pci3: on pcib2 pci3: domain=0, physical bus=3 found-> vendor=0x14e4, dev=0x1648, revid=0x10 domain=0, bus=3, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xfddf0000, size 16, enabled pcib2: requested memory range 0xfddf0000-0xfddfffff: good pcib1: requested memory range 0xfddf0000-0xfddfffff: good pcib2: matched entry for 3.1.INTA pcib2: slot 1 INTA hardwired to IRQ 25 found-> vendor=0x14e4, dev=0x1648, revid=0x10 domain=0, bus=3, slot=1, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=b, irq=7 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xfdde0000, size 16, enabled pcib2: requested memory range 0xfdde0000-0xfddeffff: good pcib1: requested memory range 0xfdde0000-0xfddeffff: good pcib2: matched entry for 3.1.INTB pcib2: slot 1 INTB hardwired to IRQ 26 pci0:3:1:0: bad VPD cksum, remain 19 bge0: mem 0xfddf0000-0xfddfffff irq 25 at device 1.0 on pci3 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfddf0000 bge0: CHIP ID 0x21000000; ASIC REV 0x02; CHIP REV 0x21; PCI-X miibus0: on bge0 brgphy0: PHY 1 on miibus0 brgphy0: OUI 0x000818, model 0x0019, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: bpf attached bge0: Ethernet address: 00:12:79:d1:2e:2d ioapic1: routing intpin 1 (PCI IRQ 25) to lapic 0 vector 49 bge0: [MPSAFE] bge0: [ITHREAD] pci0:3:1:1: bad VPD cksum, remain 19 bge1: mem 0xfdde0000-0xfddeffff irq 26 at device 1.1 on pci3 bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfdde0000 bge1: CHIP ID 0x21000000; ASIC REV 0x02; CHIP REV 0x21; PCI-X miibus1: on bge1 brgphy1: PHY 1 on miibus1 brgphy1: OUI 0x000818, model 0x0019, rev. 0 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge1: bpf attached bge1: Ethernet address: 00:12:79:d1:2e:2c ioapic1: routing intpin 2 (PCI IRQ 26) to lapic 0 vector 50 bge1: [MPSAFE] bge1: [ITHREAD] pcib3: at device 0.2 on pci2 pcib3: domain 0 pcib3: secondary bus 4 pcib3: subordinate bus 4 pcib3: I/O decode 0x4000-0x4fff pcib3: memory decode 0xfde00000-0xfdefffff pcib3: no prefetched decode pci4: on pcib3 pci4: domain=0, physical bus=4 found-> vendor=0x0e11, dev=0x0046, revid=0x01 domain=0, bus=4, slot=3, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D3 current D0 map[10]: type Memory, range 64, base 0xfdef0000, size 13, enabled pcib3: requested memory range 0xfdef0000-0xfdef1fff: good pcib1: requested memory range 0xfdef0000-0xfdef1fff: good map[18]: type I/O Port, range 32, base 0x4000, size 8, enabled pcib3: requested I/O range 0x4000-0x40ff: in range pcib1: requested I/O range 0x4000-0x40ff: in range map[1c]: type Memory, range 64, base 0xfde80000, size 18, enabled pcib3: requested memory range 0xfde80000-0xfdebffff: good pcib1: requested memory range 0xfde80000-0xfdebffff: good pcib3: matched entry for 4.3.INTA pcib3: slot 3 INTA hardwired to IRQ 51 ciss0: port 0x4000-0x40ff mem 0xfdef0000-0xfdef1fff,0xfde80000-0xfdebffff irq 51 at device 3.0 on pci4 ciss0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfdef0000 ciss0: PERFORMANT Transport ciss0: got 0 MSI messages] ioapic2: routing intpin 3 (PCI IRQ 51) to lapic 0 vector 51 ciss0: [MPSAFE] ciss0: [ITHREAD] ciss0: using 256 of 1024 available commands ciss0: firmware 2.84 ciss0: 2 SCSI channels ciss0: signature 'CISS' ciss0: valence 1 ciss0: supported I/O methods 0x80000006 ciss0: active I/O method 0x5 ciss0: 4G page base 0x00000000 ciss0: interrupt coalesce delay 0us ciss0: interrupt coalesce count 16 ciss0: max outstanding commands 1024 ciss0: bus types 0x4 ciss0: server name '' ciss0: heartbeat 0x5c ciss0: 6 physical devices ciss0: 1 logical drive ciss0: logical drive (b0t0): RAID 1, 139776MB online pcib4: at device 6.0 on pci0 pcib4: domain 0 pcib4: secondary bus 5 pcib4: subordinate bus 12 pcib4: I/O decode 0x5000-0x5fff pcib4: memory decode 0xfdf00000-0xfdffffff pcib4: no prefetched decode pci5: on pcib4 pci5: domain=0, physical bus=5 found-> vendor=0x8086, dev=0x0329, revid=0x09 domain=0, bus=5, slot=0, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit found-> vendor=0x8086, dev=0x032a, revid=0x09 domain=0, bus=5, slot=0, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit pcib5: at device 0.0 on pci5 pcib5: domain 0 pcib5: secondary bus 6 pcib5: subordinate bus 9 pcib5: I/O decode 0x5000-0x5fff pcib5: memory decode 0xfdf00000-0xfdffffff pcib5: no prefetched decode pci6: on pcib5 pci6: domain=0, physical bus=6 found-> vendor=0x1014, dev=0x01a7, revid=0x02 domain=0, bus=6, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 pcib6: at device 2.0 on pci6 pcib6: domain 0 pcib6: secondary bus 7 pcib6: subordinate bus 7 pcib6: I/O decode 0x5000-0x5fff pcib6: memory decode 0xfdf00000-0xfdffffff pcib6: no prefetched decode device_attach: pcib6 attach returned 6 pcib7: at device 0.2 on pci5 pcib7: domain 0 pcib7: secondary bus 10 pcib7: subordinate bus 12 pcib7: I/O decode 0xf000-0xfff pcib7: no prefetched decode pci10: on pcib7 pci10: domain=0, physical bus=10 uhci0: port 0x3000-0x301f irq 16 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3000 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52 uhci0: [MPSAFE] uhci0: [ITHREAD] uhci0: LegSup = 0x003b usbus0: on uhci0 uhci1: port 0x3020-0x303f irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3020 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 53 uhci1: [MPSAFE] uhci1: [ITHREAD] uhci1: LegSup = 0x0010 usbus1: on uhci1 uhci2: port 0x3040-0x305f irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3040 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 54 uhci2: [MPSAFE] uhci2: [ITHREAD] uhci2: LegSup = 0x0010 usbus2: on uhci2 uhci3: port 0x3060-0x307f irq 16 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3060 uhci3: [MPSAFE] uhci3: [ITHREAD] uhci3: LegSup = 0x0010 usbus3: on uhci3 ehci0: mem 0xfbef0000-0xfbef03ff irq 23 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfbef0000 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 55 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus4: EHCI version 1.0 usbus4: on ehci0 pcib8: at device 30.0 on pci0 pcib8: domain 0 pcib8: secondary bus 1 pcib8: subordinate bus 1 pcib8: I/O decode 0x1000-0x2fff pcib8: memory decode 0xfbf00000-0xfcffffff pcib8: no prefetched decode pcib8: Subtractively decoded bridge. pci1: on pcib8 pci1: domain=0, physical bus=1 found-> vendor=0x1002, dev=0x4752, revid=0x27 domain=0, bus=1, slot=3, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfc000000, size 24, enabled pcib8: requested memory range 0xfc000000-0xfcffffff: good map[14]: type I/O Port, range 32, base 0x2000, size 8, enabled pcib8: requested I/O range 0x2000-0x20ff: in range map[18]: type Memory, range 32, base 0xfbff0000, size 12, enabled pcib8: requested memory range 0xfbff0000-0xfbff0fff: good found-> vendor=0x0e11, dev=0xb203, revid=0x01 domain=0, bus=1, slot=4, func=0 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0103, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x1800, size 8, enabled pcib8: requested I/O range 0x1800-0x18ff: in range map[14]: type Memory, range 32, base 0xfbfe0000, size 9, enabled pcib8: requested memory range 0xfbfe0000-0xfbfe01ff: good pcib8: matched entry for 1.4.INTA pcib8: slot 4 INTA hardwired to IRQ 21 found-> vendor=0x0e11, dev=0xb204, revid=0x01 domain=0, bus=1, slot=4, func=2 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0197, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x2400, size 8, enabled pcib8: requested I/O range 0x2400-0x24ff: in range map[14]: type Memory, range 32, base 0xfbfd0000, size 11, enabled pcib8: requested memory range 0xfbfd0000-0xfbfd07ff: good map[18]: type Memory, range 32, base 0xfbfc0000, size 13, enabled pcib8: requested memory range 0xfbfc0000-0xfbfc1fff: good map[1c]: type Memory, range 32, base 0xfbf00000, size 19, enabled pcib8: requested memory range 0xfbf00000-0xfbf7ffff: good pcib8: matched entry for 1.4.INTB pcib8: slot 4 INTB hardwired to IRQ 22 vgapci0: port 0x2000-0x20ff mem 0xfc000000-0xfcffffff,0xfbff0000-0xfbff0fff at device 3.0 on pci1 pci1: at device 4.0 (no driver attached) pci1: at device 4.2 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x500 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x10000 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 56 ata0: [MPSAFE] ata0: [ITHREAD] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1: stat0=0x01 err=0x01 lsb=0x01 msb=0x01 ata1: stat1=0x01 err=0x01 lsb=0x01 msb=0x01 ata1: reset tp2 stat0=01 stat1=01 devices=0x0 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 57 ata1: [MPSAFE] ata1: [ITHREAD] acpi_tz0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0065 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 59 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 60 uart0: [FILTER] uart0: fast interrupt fdc0: port 0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 73 ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 61 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 cpu0: on acpi0 ACPI: SSDT 0xdfff9000 002DA (v1 HP SSDT0 00000001 INTL 20030228) cpu0: switching to generic Cx mode acpi_perf0: on cpu0 p4tcc0: on cpu0 cpu1: on acpi0 ACPI: SSDT 0xdfff9300 002DA (v1 HP SSDT1 00000001 INTL 20030228) est1: on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 112d0000112d device_attach: est1 attach returned 6 p4tcc1: on cpu1 cpu2: on acpi0 ACPI: SSDT 0xdfff9600 002DA (v1 HP SSDT2 00000001 INTL 20030228) est2: on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 112d0000112d device_attach: est2 attach returned 6 p4tcc2: on cpu2 cpu3: on acpi0 ACPI: SSDT 0xdfff9900 002DF (v1 HP SSDT3 00000001 INTL 20030228) est3: on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 112d0000112d device_attach: est3 attach returned 6 p4tcc3: on cpu3 ahc_isa_probe 0: ioport 0xc00 alloc failed ex_isa_identify() isa_probe_children: disabling PnP devices atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atrtc0: at port 0x70 irq 8 on isa0 atrtc0: registered as a time-of-day clock (resolution 1000000us) ppc0: cannot reserve I/O port range ppc0: failed to probe at irq 7 on isa0 uart1: at port 0x2f8-0x2ff irq 3 on isa0 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 62 uart1: [FILTER] uart1: fast interrupt isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 763673 -> 100000 procfs registered lapic: Divisor 2, Frequency 100004020 hz Timecounter "TSC" frequency 3400136791 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. ata0: Identifying devices: 00010000 ata0: New devices: 00010000 fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on ICH5 chip acd0: setting UDMA33 on ICH5 chip ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ugen4.1: at usbus4 uhub4: on usbus4 acd0: CDRW drive at ata0 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata1: Identifying devices: 00000000 ata1: New devices: 00000000 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout da0 at ciss0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-4 device da0: 135.168MB/s transfers da0: Command Queueing enabled da0: 140002MB (286726080 512 byte sectors: 255H 32S/T 35138C) pass0 at ciss0 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-4 device pass0: 135.168MB/s transfers pass0: Command Queueing enabled pass1 at ciss0 bus 33 target 0 lun 0 pass1: Fixed Uninstalled SCSI-3 device pass1: Serial Number 3KT5ABMQ000077052PVP pass1: 135.168MB/s transfers pass1: Command Queueing enabled pass2 at ciss0 bus 33 target 1 lun 0 pass2: Fixed Uninstalled SCSI-3 device pass2: Serial Number 3KT65G0300009740UG3C pass2: 135.168MB/s transfers pass2: Command Queueing enabled pass3 at ciss0 bus 33 target 2 lun 0 pass3: Fixed Uninstalled SCSI-3 device pass3: Serial Number 3KT65G7800009740W27L pass3: 135.168MB/s transfers pass3: Command Queueing enabled pass4 at ciss0 bus 33 target 3 lun 0 pass4: Fixed Uninstalled SCSI-3 device pass4: Serial Number 3KT2W9ZB00007616NLEN pass4: 135.168MB/s transfers pass4: Command Queueing enabled pass5 at ciss0 bus 33 target 4 lun 0 pass5: Fixed Uninstalled SCSI-3 device pass5: Serial Number 3KT18LBP0000754281N7 pass5: 135.168MB/s transfers pass5: Command Queueing enabled pass6 at ciss0 bus 33 target 7 lun 0 pass6: Fixed Processor SCSI-2 device pass6: 135.168MB/s transfers ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x06000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x07000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 6 vector 48 ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 6 vector 49 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 6 vector 50 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 6 vector 51 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 6 vector 52 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 6 vector 53 ioapic1: routing intpin 2 (PCI IRQ 26) to lapic 6 vector 54 uhub4: 8 ports with 8 removable, self powered ugen2.2: at usbus2 ukbd0: on usbus2 kbd2 at ukbd0 kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 ums0: on usbus2 ums0: 5 buttons and [XYZ] coordinates ID=1 GEOM: new disk da0 Trying to mount root from ufs:/dev/da0s1a ct_to_ts([2010-05-04 17:49:30]) = 1272995370.000000000 start_init: trying /sbin/init bge0: bge0: link state changed to UP link UP