Date: Fri, 5 Apr 2013 02:15:10 +0000 (UTC) From: Adrian Chadd <adrian@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r249127 - head/sys/mips/conf Message-ID: <201304050215.r352FAiP093228@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: adrian Date: Fri Apr 5 02:15:10 2013 New Revision: 249127 URL: http://svnweb.freebsd.org/changeset/base/249127 Log: Add the basic GPIO pin mapping to the hints file. Tested: * AP121 board, tested USB/jumpstart LEDs Modified: head/sys/mips/conf/AP121.hints Modified: head/sys/mips/conf/AP121.hints ============================================================================== --- head/sys/mips/conf/AP121.hints Fri Apr 5 02:02:37 2013 (r249126) +++ head/sys/mips/conf/AP121.hints Fri Apr 5 02:15:10 2013 (r249127) @@ -85,39 +85,23 @@ hint.map.5.readonly=1 # Don't flip on anything that isn't already enabled. # This includes leaving the SPI CS1/CS2 pins as GPIO pins as they're # not used here. -hint.gpio.0.function_set=0x00002000 +hint.gpio.0.function_set=0x00000000 hint.gpio.0.function_clear=0x00000000 # These are the GPIO LEDs and buttons which can be software controlled. #hint.gpio.0.pinmask=0x001c02ae -hint.gpio.0.pinmask=0x0 +hint.gpio.0.pinmask=0x00001803 -# pin 1 - USB (LED) -# pin 2 - System (LED) -# Pin 3 - Reset (input) -# Pin 5 - QSS (LED) -# Pin 7 - QSS Button (input) -# Pin 8 - wired into the chip reset line -# Pin 9 - WLAN -# Pin 10 - UART TX (not GPIO) -# Pin 13 - UART RX (not GPIO) -# Pin 18 - RTL8366RB switch data line -# Pin 19 - RTL8366RB switch clock line -# Pin 20 - "GPIO20" +# gpio0 - WLAN LED +# gpio1 - USB LED +# gpio11 - Jumpstart button +# gpio12 - Reset button # LEDs are configured separately and driven by the LED device -#hint.gpioled.0.at="gpiobus0" -#hint.gpioled.0.name="usb" -#hint.gpioled.0.pins=0x0002 - -#hint.gpioled.1.at="gpiobus0" -#hint.gpioled.1.name="system" -#hint.gpioled.1.pins=0x0004 - -#hint.gpioled.2.at="gpiobus0" -#hint.gpioled.2.name="qss" -#hint.gpioled.2.pins=0x0020 - -#hint.gpioled.3.at="gpiobus0" -#hint.gpioled.3.name="wlan" -#hint.gpioled.3.pins=0x0200 +hint.gpioled.0.at="gpiobus0" +hint.gpioled.0.name="wlan" +hint.gpioled.0.pins=0x0001 + +hint.gpioled.1.at="gpiobus0" +hint.gpioled.1.name="usb" +hint.gpioled.1.pins=0x0002
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201304050215.r352FAiP093228>