Date: Thu, 18 Sep 2008 23:15:36 GMT
From: John Hood <jh@sandstorm.net>
To: freebsd-gnats-submit@FreeBSD.org
Subject: kern/127486: early SMP panic ("AP #1 (PHY #1) failed!") on Dell Inspiron 530
Message-ID: <200809182315.m8INFaUA075733@www.freebsd.org>
Resent-Message-ID: <200809182320.m8INK1U8080073@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 127486
>Category: kern
>Synopsis: early SMP panic ("AP #1 (PHY #1) failed!") on Dell Inspiron 530
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Sep 18 23:20:01 UTC 2008
>Closed-Date:
>Last-Modified:
>Originator: John Hood
>Release: 7.1-BETA
>Organization:
Sandstorm Enterprises
>Environment:
FreeBSD releng-new 7.1-BETA FreeBSD 7.1-BETA #0: Sun Sep 7 13:49:18 UTC 2008 root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
>Description:
The machine is a Dell Inspiron 530 with Core 2 Quad CPU (Q6600), 3GB RAM. This is definitely an inexpensive consumer-grade system with Phoenix BIOS (Dell version 1.0.15, the latest). I seem to think it may be made by Foxconn.
When booting GENERIC from hard disk, it almost always prints
ACPI APIC Table: <DELL FX09 >
pauses a few seconds, then prints
AP #1 (PHY #1) failed!
panic y/n? [y] panic: bye-bye
cpuid = 0
(photos available for those that want 'em)
Once in every 5-10 boots, it starts successfully.
When booted from CD-ROM, it always starts successfully. I can also boot disc1, break from the boot menu to a loader prompt,
unload
set currdev=disk0s1a:
boot
and get a successful boot that way.
Setting kern.smp.disabled causes it to work, too, of course...
The machine is a USB-only system, no PS/2 ports, so I attribute the oddness at the prompt to having no keyboard available.
Sometimes it rapidly scrolls text that might be a register dump on a trap and reboots in less than half a second, but I haven't seen that in a while. I think that's post-panic behavior.
I've started looking at boot0/boot1/cdboot to see if I can see anything obvious, but nothing's obviously wrong. I'm also willing to help another developer with testing/debugging this one.
This appears to be same/similar behavior as a problem that was seen a couple of years ago with Intel SE7500CW2 motherboards (we have a system here with an SE7501CW2 motherboard that we occasionally see this on.)
--jh
dmesg from a successful boot:
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-BETA #0: Sun Sep 7 13:49:18 UTC 2008
root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (2394.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 4
real memory = 3210280960 (3061 MB)
avail memory = 3135885312 (2990 MB)
ACPI APIC Table: <DELL FX09 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <DELL FX09 > on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bf490000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xff00-0xff07 mem 0xfdf00000-0xfdf7ffff,0xd0000000-0xdfffffff,0xfda00000-0xfdafffff irq 16 at device 2.0 on pci0
agp0: <Intel G33 SVGA controller> on vgapci0
agp0: detected 7676k stolen memory
agp0: aperture size is 256M
em0: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0xfe00-0xfe1f mem 0xfdfc0000-0xfdfdffff,0xfdfff000-0xfdffffff irq 20 at device 25.0 on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:21:9b:01:39:f6
uhci0: <UHCI (generic) USB controller> port 0xfd00-0xfd1f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xfc00-0xfc1f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xfb00-0xfb1f irq 19 at device 26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfdffe000-0xfdffe3ff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pci0: <multimedia> at device 27.0 (no driver attached)
uhci3: <UHCI (generic) USB controller> port 0xfa00-0xfa1f irq 23 at device 29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xf900-0xf91f irq 19 at device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xf800-0xf81f irq 18 at device 29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfdffd000-0xfdffd3ff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xcf00-0xcf3f mem 0xfdeff000-0xfdefffff,0xfdd00000-0xfddfffff irq 21 at device 0.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:b3:25:28:57
fxp0: [ITHREAD]
dc0: <82c169 PNIC 10/100BaseTX> port 0xcc00-0xccff mem 0xfdefe000-0xfdefe0ff irq 16 at device 1.0 on pci2
miibus1: <MII bus> on dc0
bmtphy0: <BCM5201 10/100baseTX PHY> PHY 1 on miibus1
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:a0:cc:50:5e:12
dc0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8 SATA300 controller> port 0xf700-0xf707,0xf600-0xf603,0xf500-0xf507,0xf400-0xf403,0xf300-0xf31f mem 0xfdffc000-0xfdffc7ff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.20 controller with 6 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: acpi_hpet0 attach returned 12
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 927092706000927
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 927092706000927
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 927092706000927
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 927092706000927
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: acpi_hpet0 attach returned 12
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcc000-0xcefff,0xcf000-0xd2fff,0xd3000-0xd3fff pnpid ORM0000 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad4: 476940MB <Seagate ST3500630AS 3.ADJ> at ata2-master SATA300
acd0: DVDR <Optiarc DVD+/-RW AD-7200S/101A> at ata3-master SATA150
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
Trying to mount root from ufs:/dev/ad4s1a
ukbd0: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 2> on uhub2
kbd2 at ukbd0
ums0: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 2> on uhub2
ums0: 5 buttons and Z dir.
>How-To-Repeat:
Install 7.1-BETA to hard drive, boot.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200809182315.m8INFaUA075733>