Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 05 Feb 2003 08:44:06 -0700
From:      Scott Long <scott_long@btc.adaptec.com>
To:        Victor Ponomarev <vick@unet.ru>
Cc:        freebsd-current@freebsd.org, freebsd-smp@freebsd.org
Subject:   Re: se7500+dual xeon?
Message-ID:  <3E413146.7080207@btc.adaptec.com>
In-Reply-To: <3E40DFFF.3040706@unet.ru>
References:  <3E40DFFF.3040706@unet.ru>

next in thread | previous in thread | raw e-mail | index | archive | help
What exactly are you pointing out that doesn't work?  It looks like 
you're using the default GENERIC uni-processor kernel from the 5.0 
release.  You'll need to recompile your kernel for SMP.

Scott

Victor Ponomarev wrote:

> Hi All.
>
> It's seems that smp kernel configuration doesn't  work correctly on
> Intel SE7500WV2 motherboard
> with 2 xeon processors in 5.0-RELEASE.
>
> Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>    The Regents of the University of California. All rights reserved.
> FreeBSD 5.0-RELEASE #0: Thu Jan 16 22:16:53 GMT 2003
>    root@hollin.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0673000.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06730a8.
> Timecounter "i8254"  frequency 1193182 Hz
> Timecounter "TSC"  frequency 2592366912 Hz
> CPU: Pentium 4 (2592.37-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
>
> Features=0xffffffffbfebfbff>
>
> real memory  = 2147418112 (2047 MB)
> avail memory = 2083561472 (1987 MB)
> Initializing GEOMetry subsystem
> Pentium Pro MTRR support enabled
>    ACPI-0625: *** Warning: Type override - [DEB_] had invalid type
> (Integer) for Scope operator, changed to (Scope)
>    ACPI-0625: *** Warning: Type override - [MLIB] had invalid type
> (Integer) for Scope operator, changed to (Scope)
>    ACPI-0625: *** Warning: Type override - [DATA] had invalid type
> (String) for Scope operator, changed to (Scope)
>    ACPI-0625: *** Warning: Type override - [SIO_] had invalid type
> (String) for Scope operator, changed to (Scope)
>    ACPI-0625: *** Warning: Type override - [LEDP] had invalid type
> (String) for Scope operator, changed to (Scope)
>    ACPI-0625: *** Warning: Type override - [GPEN] had invalid type
> (String) for Scope operator, changed to (Scope)
>    ACPI-0625: *** Warning: Type override - [GPST] had invalid type
> (String) for Scope operator, changed to (Scope)
>    ACPI-0625: *** Warning: Type override - [WUES] had invalid type
> (String) for Scope operator, changed to (Scope)
>    ACPI-0625: *** Warning: Type override - [WUSE] had invalid type
> (String) for Scope operator, changed to (Scope)
>    ACPI-0625: *** Warning: Type override - [SBID] had invalid type
> (String) for Scope operator, changed to (Scope)
>    ACPI-0625: *** Warning: Type override - [SWCE] had invalid type
> (String) for Scope operator, changed to (Scope)
> npx0:  on motherboard
> npx0: INT 16 interface
> acpi0:  on motherboard
>    ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST
>    ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
>    ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE47
> Using $PIR table, 19 entries at 0xc00f3070
> acpi0: power button is handled as a fixed feature programming model.
> Timecounter "ACPI-fast"  frequency 3579545 Hz
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> acpi_cpu0:  on acpi0
> acpi_cpu1:  on acpi0
> acpi_cpu2:  on acpi0
> acpi_cpu3:  on acpi0
> pcib0:  port 0xcf8-0xcff on acpi0
> pci0:  on pcib0
> pci0:  at device 0.1 (no driver attached)
> pcib1:  at device 3.0 on pci0
> pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P5 -
> AE_NOT_FOUND
> pci2:  on pcib1
> pci2:  at device 28.0 (no driver
> attached)
> pcib2:  at device 29.0 on pci2
> pci4:  on pcib2
> pci2:  at device 30.0 (no driver
> attached)
> pcib3:  at device 31.0 on pci2
> pci3:  on pcib3
> em0:  port
> 0x2040-0x207f mem 0xfeac0000-0xfeadffff irq 10 at device 7.0 on pci3
> em0:  Speed:N/A  Duplex:N/A
> em1:  port
> 0x2000-0x203f mem 0xfeae0000-0xfeafffff irq 10 at device 7.1 on pci3
> em1:  Speed:N/A  Duplex:N/A
> pci0:  at device 3.1 (no driver attached)
> pcib4:  at device 30.0 on pci0
> pci1:  on pcib4
> atapci0:  port
> 0x1420-0x142f,0x140c-0x140f,0x1410-0x1417,0x1408-0x140b,0x1400-0x1407
> mem 0xfe9e0000-0xfe9e3fff irq 9 at device 2.0 on pci1
> ata2: at 0x1400 on atapci0
> ata3: at 0x1410 on atapci0
> pci1:  at device 12.0 (no driver attached)
> isab0:  at device 31.0 on pci0
> isa0:  on isab0
> atapci1:  port
> 0x3a0-0x3af,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci1
> ata1: at 0x170 irq 15 on atapci1
> pci0:  at device 31.3 (no driver attached)
> atkbdc0:  port 0x64,0x60 irq 1 on acpi0
> atkbd0:  flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> acpi_ec0:  port 0xca7,0xca6 on acpi0
> fdc0: cmd 3 failed at out byte 1 of 3
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> sio1 port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> fdc0: cmd 3 failed at out byte 1 of 3
> orm0:  at iomem
> 0xd3000-0xd47ff,0xd1800-0xd2fff,0xc8000-0xd17ff,0xc0000-0xc7fff on isa0
> pmtimer0 on isa0
> fdc0:  at port
> 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ppc0: parallel port not found.
> sc0:  at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0:  at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounters tick every 10.000 msec
> acd0: CDROM  at ata1-master PIO4
> ar0: 76319MB  [9729/255/63] status: READY subdisks:
> 0 READY ad4: 76319MB  [155061/16/63] at ata2-master UDMA100
> ar1: 78533MB  [10011/255/63] status: READY subdisks:
> 0 READY ad6: 78533MB  [159560/16/63] at ata3-master
> UDMA100
> Opened disk ad4 -> 16
> Opened disk ad4 -> 16
> Opened disk ad4 -> 16
> Opened disk ad4 -> 16
> Opened disk ad6 -> 16
> Opened disk ad6 -> 16
> Mounting root from ufs:/dev/ar0s1a
>
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-current" in the body of the message




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E413146.7080207>