Date: Thu, 26 Mar 2015 11:34:52 -0700 From: Anthony Cornehl <accornehl@fastmail.fm> To: freebsd-infiniband@freebsd.org Subject: Re: Mellanox MHET2X-1TC Message-ID: <1427394892.2064990.245689489.75C56100@webmail.messagingengine.com> In-Reply-To: <914105862.15784341.1427308407435.JavaMail.zimbra@comcast.net> References: <2047411187.14848489.1427222174378.JavaMail.zimbra@comcast.net> <5511D0F9.1040007@selasky.org> <914105862.15784341.1427308407435.JavaMail.zimbra@comcast.net>
next in thread | previous in thread | raw e-mail | index | archive | help
You'll want to add it to the devices table in mthca_main.c as well, to register the driver with that device. Cheers! -- Anthony Cornehl accornehl@fastmail.fm On Wed, Mar 25, 2015, at 11:33 AM, rondzierwa@comcast.net wrote: > Hans, > > Thanks for your hint. but I'm a little unclear where this should be > defined. I found it in the pci.h in the kernel source > (/usr/src/sys/ofed/include/linux/pci.h), and in the pci.h file in the > Mellanox source tree. At the risk of sounding like a total newb, does it > have to be added somewhere else for FreeBSD? > > thanks, > ron. > > ----- Original Message ----- > > From: "Hans Petter Selasky" <hps@selasky.org> > To: rondzierwa@comcast.net, freebsd-infiniband@freebsd.org, "Oded > Shanoon" <odeds@mellanox.com> > Sent: Tuesday, March 24, 2015 5:02:49 PM > Subject: Re: Mellanox MHET2X-1TC > > On 03/24/15 19:36, rondzierwa@comcast.net wrote: > > Hello All, > > > > I am trying to use an MHET2x-1TC in a Sun X4500 running 10.1-RELEASE, but cannot seem to get the device to show up anywhere. > > > > Has anybody had any success using this adapter on 10.1? If so what did you have to do to get it to work? > > > > I've downloaded two versions of the driver from the Mellanox site, MLNX_EN_FreeBSD_v2.1.tgz and the newer MLNX_OFED_FREEBSD_V2.1.5.tar.gz. > > both built and installed. I downloaded and installed mft-3.8.0-56 tools and installed them. I've tried loading the old and the new modules from loader.conf with a reboot, and get the same results - no new devices in either /dev or ifconfig > > > > pciconf sees the device: > > > > # pciconf -lv | grep Mellanox -C 3 > > class = network > > subclass = ethernet > > pcib7@pci0:6:2:0: class=0x060400 card=0x00000000 chip=0x5a4615b3 rev=0xa1 hdr=0x01 > > vendor = 'Mellanox Technologies' > > device = 'MT23108 PCI Bridge' > > class = bridge > > subclass = PCI-PCI > > > > The PCI ID of your device is listed, but not in any drivers. > > #define PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE 0x5a46 > > --HPS > > _______________________________________________ > freebsd-infiniband@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-infiniband > To unsubscribe, send any mail to > "freebsd-infiniband-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1427394892.2064990.245689489.75C56100>