Date: Tue, 09 Nov 2004 04:46:53 -0600 From: "Travis J. Hicks" <travis@desideratum.com> To: <freebsd-questions@freebsd.org> Subject: Rebooting fails after installing 5.3-RELEASE Message-ID: <BDB5FC3D.6E27%travis@desideratum.com>
next in thread | raw e-mail | index | archive | help
Hello,
I have a custom PC with an ASUS A7N266-VM motherboard, 256MB of RAM, a WD
hard drive, a generic CD-ROM drive, and a D-Link DFE-530TX+ NIC. I had
FreeBSD 4.9 on one partition and Windows XP Pro on another. Tonight I erased
the 4.9 partition and installed 5.3.
Since then I have been unable to get the machine to reboot when booted into
FreeBSD. Calling "reboot" or "shutdown -r now" syncs, displays the uptime,
then roughly says:
Shutting down ACPI
Stray irq9
ACPI-0265: *** Error: Hardware never changed modes
The machine then appears to reset. However, instead of being immediately
presented with the BIOS I am left with a blank screen and a motherboard that
continuously beeps an alternating two tones. The closest entry I can find to
this in my motherboard manual indicates missing or defecting RAM, but this
is not the case. Pressing the reset button causes the machine to boot
normally. Rebooting from 4.9 or Windows XP works perfectly.
I can reproduce this same situation when booted from 5.3-RELEASE-i386-disc1.
If at the "Welcome to FreeBSD" menu I choose option 7 the machine reboots
correctly. If I choose option 1 to boot into the installer, then exit the
installer, the machine will fail to reboot correctly, beeping continuously
until reset.
I've googled, checked the handbook, and checked a book. Any ideas? My uname
-a and dmesg output is below.
--
Best Regards,
Travis J. Hicks
#uname -a
FreeBSD .domain.actdsltmp 5.3-RELEASE FreeBSD 5.3-RELEASE #0: Fri Nov 5
04:19:18 UTC 2004
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
#dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Fri Nov 5 04:19:18 UTC 2004
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (1662.38-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x681 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 234799104 (223 MB)
avail memory = 219971584 (209 MB)
ACPI APIC Table: <ASUS A7N266VM>
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7N266VM> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI link \\_SB_.LNKF has invalid initial irq 5, ignoring
ACPI link \\_SB_.LNKU has invalid initial irq 10, ignoring
ACPI link \\_SB_.LNKI has invalid initial irq 10, ignoring
ACPI link \\_SB_.LNKJ has invalid initial irq 5, ignoring
ACPI link \\_SB_.LNKK has invalid initial irq 11, ignoring
pci0: <ACPI PCI bus> on pcib0
agp0: <NVIDIA nForce AGP Controller> mem 0xf8000000-0xfbffffff at device 0.0
on pci0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xef000000-0xef000fff irq 21 at
device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xee800000-0xee800fff irq 21 at
device 3.0 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci0: <network, ethernet> at device 4.0 (no driver attached)
pci0: <multimedia, audio> at device 5.0 (no driver attached)
pci0: <multimedia, audio> at device 6.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
ACPI link \\_SB_.LNKA has invalid initial irq 5, ignoring
ACPI link \\_SB_.LNKC has invalid initial irq 6, ignoring
pci1: <ACPI PCI bus> on pcib1
rl0: <D-Link DFE-530TX+ 10/100BaseTX> port 0xb800-0xb8ff mem
0xec800000-0xec8000ff irq 18 at device 8.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:0d:88:3b:45:6c
atapci0: <nVidia nForce UDMA100 controller> port
0xa800-0xa80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 9.0 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
ACPI link \\_SB_.LNKE has invalid initial irq 11, ignoring
pci2: <ACPI PCI bus> on pcib2
pci2: <display, VGA> at device 0.0 (no driver attached)
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3
on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1662383550 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 114473MB <WDC WD1200JB-00DUA0/65.13G65> [232581/16/63] at ata0-master
UDMA100
acd0: CDROM <56X CD-ROM/VER 6.5G> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BDB5FC3D.6E27%travis>